Drag reduction by a rotationally oscillating cylinder with a flexible filament

Abstract

The hydrodynamic mechanism of drag reduction by a rotationally oscillating cylinder with a flexible filament was explored using the penalty immersed boundary method. A simulation of a stationary cylinder without a filament was also performed for comparison. The effects of the filament length, bending rigidity, oscillatory frequency, and oscillatory amplitude on drag reduction were systematically examined. The underlying mechanism of drag reduction was characterized in terms of the shape deformation of the filament, wake pattern, pressure distribution, and flapping dynamics. Two dominant flapping modes were observed: an oscillation mode with less than half a wave on the filament and an undulation mode with more than one wave on the filament. In the oscillation mode, drag reduction is mainly achieved by the thrust generated by the filament, accompanied by an increase in lift fluctuations. The pressure difference caused by the flapping motion between the upper and lower sides of the filament is the main cause of the thrust. In the undulation mode, drag reduction is realized by both the thrust generated by the filament and the decreased form drag of the cylinder. A filament flapping in the oscillation mode can generate greater thrust than a filament flapping in the undulation mode. A long undulatory filament with relatively low oscillatory amplitude effectively stabilizes the wake, resulting in a decrease in the lift fluctuations.& nbsp;Published under an exclusive license by AIP Publishing.