PID controller tuning based on process models and interfacing model predictive controller with low level PID loops = 공정 모델에 의거한 PID 제어기의 튜닝 방법과 모델 예측 제어기를 하위 PID 루프에 연결하는 방법에 관한 연구

Cited 0 time in webofscience Cited 0 time in scopus
  • Hit : 385
  • Download : 0
This study developed new methods for controller design for SISO systems, integrating and unstable processes, cascade control systems and MIMO systems. This study also developed how to interface model predictive controller (advanced control system) with low level loops(e.g. PID loops). First, the IMC-PID approach is generalized and how to obtain PID parameters for general process model is proposed. PID parameters are obtained for general process models by approximating the feedback form of an IMC controller with a Maclaurin series in the Laplace domain. These PID parameters yield closed-loop responses that are closer to the desired responses than those obtained by PID controllers tuned by other methods. The improvement in closed-loop control performance becomes more prominent as the dead time of the process model increases. Second, a new design method for two degree of freedom controllers is proposed in this thesis. Such controllers are essential for unstable processes, and provide significantly improved dynamic performance over single degree of freedom controllers for stable processes when the disturbances enter through the process. Third, a new method for PID controller tuning based on process models for integrating and unstable processes with time delay is proposed. The method consists of first finding the ideal controller that gives the desired closed loop response and then finding the PID approximation of the ideal controller by Maclaurin series. Closed-loop responses with the controllers tuned by the proposed method are compared with those tuned by the existing methods. The results show that the proposed tuning method is simpler to use and gives better closed loop performance than the existing methods. Fourth, a new method for PID controller tuning based on process models for cascaded control systems is proposed. This method can be applied to any open loop stable processes. Furthermore, it enables us to tune the PID controllers both for the inner-loop ...
Park, Sun-Wonresearcher박선원researcher
한국과학기술원 : 화학공학과,
Issue Date
143522/325007 / 000955285

학위논문(박사) - 한국과학기술원 : 화학공학과, 1998.8, [ x, 145 p. ]


MIMO systems; Unstable systems; Cascade systems; SISO systems; PID tuning; Model predictive controller; 모델 인식; 모델 예측 제어; 다중입력 다중 출력계; 불안정 공정; 다단계 제어; 비례 적분 미분 제어기; Subspace identification

Appears in Collection
Files in This Item
There are no files associated with this item.


  • mendeley


rss_1.0 rss_2.0 atom_1.0