DC Field | Value | Language |
---|---|---|
dc.contributor.author | Kim, YunHo | ko |
dc.contributor.author | Kumar, Sarath Sathish Kumar | ko |
dc.contributor.author | Park, Yurim | ko |
dc.contributor.author | Kwon, Hyunseok | ko |
dc.contributor.author | Kim, Chun-Gon | ko |
dc.date.accessioned | 2020-04-01T02:20:15Z | - |
dc.date.available | 2020-04-01T02:20:15Z | - |
dc.date.created | 2020-01-30 | - |
dc.date.created | 2020-01-30 | - |
dc.date.created | 2020-01-30 | - |
dc.date.issued | 2020-03 | - |
dc.identifier.citation | COMPOSITES PART B-ENGINEERING, v.185 | - |
dc.identifier.issn | 1359-8368 | - |
dc.identifier.uri | http://hdl.handle.net/10203/273748 | - |
dc.description.abstract | The ballistic performance of a bullet-proof fabric can be increased by an increment in the friction between fibres. For enhancement of this performance, numerous studies on the shear thickening fluid (STF)-impregnated fabric have been conducted. The STF as a fluid, however, has inherent shortcomings. Our research aim is to understand and compare experimentally two different bullet-proof fabrics treated with a simple spray coating and STF impregnation. In this study, 71 single yam pull-out and 90 high-velocity impact experiments were carried out. It was remarkable that the newly proposed Heracron fabric coated with a commercial coating spray increased by more than 90% the energy absorption before penetration, with only less than 15% of add-on weight. It was found that the polymeric anchors created on the fibre produce an exceptionally high level of friction between fibres, according to a microscopic morphological analysis and the single-yarn pull-out experiment. This study revealed the physical explanation of this coating method, showed its feasibility, and considered its effectiveness with excellent results. | - |
dc.language | English | - |
dc.publisher | ELSEVIER SCI LTD | - |
dc.title | High-velocity impact onto a high-frictional fabric treated with adhesive spray coating and shear thickening fluid impregnation | - |
dc.type | Article | - |
dc.identifier.wosid | 000518704500012 | - |
dc.identifier.scopusid | 2-s2.0-85078125235 | - |
dc.type.rims | ART | - |
dc.citation.volume | 185 | - |
dc.citation.publicationname | COMPOSITES PART B-ENGINEERING | - |
dc.identifier.doi | 10.1016/j.compositesb.2020.107742 | - |
dc.contributor.localauthor | Kim, Chun-Gon | - |
dc.description.isOpenAccess | N | - |
dc.type.journalArticle | Article | - |
dc.subject.keywordAuthor | Ballistic | - |
dc.subject.keywordAuthor | Bullet-proof fabric | - |
dc.subject.keywordAuthor | High-velocity impact | - |
dc.subject.keywordAuthor | Spray coating | - |
dc.subject.keywordAuthor | Shear thickening fluid (STF) | - |
dc.subject.keywordPlus | P-ARAMID FABRICS | - |
dc.subject.keywordPlus | INTER-YARN FRICTION | - |
dc.subject.keywordPlus | BALLISTIC PERFORMANCE | - |
dc.subject.keywordPlus | PUNCTURE RESISTANCE | - |
dc.subject.keywordPlus | WOVEN FABRICS | - |
dc.subject.keywordPlus | STF | - |
dc.subject.keywordPlus | BEHAVIOR | - |
dc.subject.keywordPlus | SOFT | - |
dc.subject.keywordPlus | COMPOSITES | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.