ME-Theses_Master(석사논문)

Recent Items

Collection's Items (Sorted by Submit Date in Descending order): 3701 to 3720 of 3969

3701
내압을 받는 튜브 리듀싱에 관한 연구 = Study on the tube reducing process subject to internal pressurelink

이항수; Lee, Hang-Soo; et al, 한국과학기술원, 1987

3702
외부가압 공기윤활 저어널베어링의 안정성에 관한 해석 = An analysis of the stability of externally pressurized air-lubricated journal bearingslink

임종락; Lim, Jong-Rak; et al, 한국과학기술원, 1987

3703
이동 로보트의 조타제어기 설계와 직선추종 주행실험에 관한 연구 = (A) study on the design of steering controller of mobile robot and the experiment of tracking a straight-line trajectorylink

조덕영; Cho, Duck-Young; et al, 한국과학기술원, 1987

3704
연삭 가공면의 표면조도와 형상정밀도의 비접촉식 인프로세스 측정기술 개발 = An in-process measurement technique for non-contact monitering of surface roughness and form accuracy of ground surfaceslink

임동열; Yim, Dong-Yeol; et al, 한국과학기술원, 1987

3705
정수압 압출공정에서 윤활막의 온도효과를 고려한 압출 하중의 해석 = An analysis of extrusion load considering thermal effect on hydrodynamic lubrication film in hydrostatic extrusion processlink

박훈재; Park, Hoon-Jae; et al, 한국과학기술원, 1987

3706
밀링가공시 발생하는 공구마멸과 AE 신호에 관한 연구 = A study on the progressive tool wear and AE(Acoustic emission) signals in milling processlink

이병찬; Lee, Byung-Chan; et al, 한국과학기술원, 1987

3707
레이저빔을 이용한 표면경화처리에서 열유동 및 잔류응력에 관한 연구 = A study on the heat flow and residual stress in laser surface hardening treatmentlink

양영수; Yang, Young-Soo; et al, 한국과학기술원, 1987

3708
삼각 Patch를 이용한 곡면 Modelling에 관한 연구 = A study for surface modelling using triangular patcheslink

윤용일; Yun, Yong-Il; et al, 한국과학기술원, 1987

3709
곡선 속도 불연속 패턴을 이용한 환상 압연 해석 = Analysis of plane strain ring rolling by using curved tangential velocity discontinuity patternslink

이낙규; Lee, Nag-Kyu; et al, 한국과학기술원, 1987

3710
저어널베어링의 압력 및 온도분포에 관한 실험적 연구 = An experimental study on the pressure and temperature distribution in a plain journal bearinglink

신영재; Shin, Young-Jae; et al, 한국과학기술원, 1987

3711
조립용 로보트를 위한 공압 진동 조립기구의 개발 = Development of a pneumatic assembly device for assembly robotlink

안성준; Ahn, Sung-Joon; et al, 한국과학기술원, 1987

3712
선삭작업에서의 절삭과정 모델링과 비례-적분 적응 제어기의 적용에 관한 연구 = Modeling of cutting process and adaptive PI control in turninglink

안태길; Ahn, Tae-Kil; et al, 한국과학기술원, 1987

3713
전기 접촉저항과 접촉부의 전류밀도분포에 대한 기계적 접촉조건의 영향에 관한 연구 = A study on the influence of mechanical contact condition on contact resistance and current density distribution in the electrical contact arealink

박수웅; Park, Soo-Woong; et al, 한국과학기술원, 1987

3714
곡면 형상을 가진 금형에 의한 축대칭 단조의 유한 요소 해석 = Finite element analysis of axisymmetric forging by curved dieslink

박용복; Park, Yong-Bok; et al, 한국과학기술원, 1987

3715
로보트 시각 시스템을 이용한 사각형단면형상을 갖는 물체의 조립작업에 관한 연구 = A study on assembly task of parts with rectangular cross-sectional area by robot vision systemlink

변종은; Byun, Jong-Eun; et al, 한국과학기술원, 1987

3716
$CO_2$ 아-크 용접에서의 용융부 실시간 추정을 위한 적외선 온도 측정 장치에 대한 연구 = Development of infrared temperature sensor for on-line estimation of the weld pool in $CO_2$ arc welding processlink

강선호; Kang, Seon-Ho; et al, 한국과학기술원, 1987

3717
패드의 선단압력을 고려한 부체꼴 모양의 피봇식 추력 베어링의 성능해석 = An analysis of the performance of sector shaped, pivoted pad thrust bearings in consideration of ram-pressurelink

김종수; Kim, Jong-Soo; et al, 한국과학기술원, 1987

3718
압력보상형 가변유량 펌프의 동특성에 관한 연구 = A study on the dynamic characteristics of a pressure-componsated variable displacement pumplink

김중찬; Kim, Joong-Chan; et al, 한국과학기술원, 1987

3719
합성신호의 위상차를 이용한 근접 센서에 관한 연구 = A study on the optical proximity sensor using phase information by the synthesized signallink

박경독; Park, Kyeong-Dok; 이종원; 조형석; et al, 한국과학기술원, 1986

3720
피봇식 추력베어링의 선단발생압력과 THD 성능에 관한 연구 = A study on ram pressure and THD performanceof pivoted pad thrust bearinglink

박홍규; Park, Hong-Gyu; et al, 한국과학기술원, 1986

rss_1.0 rss_2.0 atom_1.0