3721 | 축 대칭 Hydroforming 공정에 의한 유한 요소 해석 = Finite element analysis of the axisymmetric hydroforming processlink 최선준; Choi, Sun-Jun; et al, 한국과학기술원, 1984 |
3722 | (A) study on the tool wear by dynamic data system (DDS) approach = Dynamic Data System (DDS) 방법을 이용한 공구 마멸에 관한 연구link Hwang, Hong-Yeon; 황홍연; et al, 한국과학기술원, 1984 |
3723 | 3-way 밸브를 갖은 전기 유압식 서어보 미케니즘의 파라미터 센시티비티에 관한 연구 = A study on parameter sensitivity of an electro-hydraulic servomechanism with three-way valve-piston combinationslink 김홍근; Kim, Hong-Kun; et al, 한국과학기술원, 1984 |
3724 | Development of a low-cost industrial eye that recognizes the position and size of drilled holes = 가공된 원공의 내경 및 위치를 인식하는 저렴한 Industrial Eye 의 개발link Chung, Won-Jee; 정원지; et al, 한국과학기술원, 1984 |
3725 | 가변기 통화에 따른 소형디젤 엔진의 진동특성 연구 = Convertibility of the automobile diesel engine to a variable displacement engine and its vibration characteristicslink 정해일; Jung, Hae-Il; 이종원; 곽윤근; et al, 한국과학기술원, 1984 |
3726 | Crack growth and acoustic emission in graphite = 흑연에서 균열 성장과 음향방출link Choi, Gil-O; 최길오; et al, 한국과학기술원, 1984 |
3727 | 전극 분리현상을 모니터링 파라미터로 하는 제어시스템 = On line feedback control of electrode movement for resistance spot weldinglink 전동휘; Chun, Dong-Whee; et al, 한국과학기술원, 1984 |
3728 | 유한 차분법을 이용한 유압관로의 특성에 관한 연구 = A study on dynamic characteristics of hydraulic transmission line by finite difference methodlink 정선국; Jeong, Seon-Gook; 조형석; 송창섭; et al, 한국과학기술원, 1984 |
3729 | 순차 이송 금형의 컴퓨터 원용 설계에 관한 연구 = A study on the computer aided design of progressive dieslink 노태성; Noh, Tae-Sung; et al, 한국과학기술원, 1984 |
3730 | (A) study on the vibration absorber using viscoelastic material = 점탄성 재료를 이용한 진동 흡수기에 대한 연구link Yeo, Tae-In; 여태인; et al, 한국과학기술원, 1984 |
3731 | Dynamic Data System (DDS) 방법에 의한 선삭작업의 안정성 해석 = Stability analysis of a turning machine by dynamic data systemlink 이원학; Rhee, Won-Hack; et al, 한국과학기술원, 1984 |
3732 | 조립용 로보트의 유연성있고 감지성있는 손목의 개발에 대한 연구 = The design and development of flexible and sensible wrist of robot for assembling processlink 고경철; Ko, Kyong-Chul; 조형석; 이정원; et al, 한국과학기술원, 1984 |
3733 | 발란스된 로보트의 동특성 및 제어에 관한 연구 = A study on dynamic characteristics and control of a balanced robotic manipulatorlink 안무승; Ahn, Mu-Seung; et al, 한국과학기술원, 1984 |
3734 | Ultrasonic Right Angle 방법을 이용한 이온 질화 깊이 측정 = Measurements of ion-nitriding depth using ultrasonic right angle methodlink 고범석; Ko, Bum-Seog; et al, 한국과학기술원, 1984 |
3735 | Determination of optimal firing intervals in multiple rocket launcher = 다연장포의 최적 발사시간 간격의 결정link Han, Man-Cheol; 한만철; et al, 한국과학기술원, 1983 |
3736 | 평면 응력 Bore expanding 에 있어서의 평면 이방성의 영향 = The effect of planar anisotropy in plane-stress bore expandinglink 주진원; Joo, Jin-Won; 양동열; 이중홍; et al, 한국과학기술원, 1983 |
3737 | Ultrasonic assessment of microstructures of steel casting, and hardness (HRC) = 초음파에 의한 주강의 미세 구조 평가와 경도 (HRC)link Choi, Nak-Sam; 최낙삼; et al, 한국과학기술원, 1983 |
3738 | 구동 장치와 측정 장치의 최적 위치와 잔류 진동 모우드의 영향에 대한 연구 = A study on the optimal locations of actuators and sensors and the effect of the residual modeslink 최형돈; Choi, Hyung-Don; et al, 한국과학기술원, 1983 |
3739 | 소결 금속의 압출에 관한 연구 = A study on the extrusion of sintered porous metallink 이정근; Lee, Jeong-Keun; 양동열; 오흥국; et al, 한국과학기술원, 1983 |
3740 | "S" cam brake noise at low speed = 低回轉時의 S-캠 브레이크의 騷音分析link Jeon, Sang-Bok; 전상복; et al, 한국과학기술원, 1983 |