1701 | 운전중 변형형상의 가시화 = Visualization of operational deflection shapelink 조문선; Cho, Mun-Son; et al, 한국과학기술원, 1995 |
1702 | 내연기관 흡배기관내의 압력맥동 해석을 위한 S/W의 개발 연구 = S/W programming study for pressure waves analysis in intake and exhaust pipes of an I.C enginelink 정태규; Jung, Tae-Kyu; et al, 한국과학기술원, 1995 |
1703 | 예측제어를 이용한 차량의 롤 및 피치제어 = Predictive roll and pitch control of ground vehiclelink 전재환; Jeon, Jae-Hwan; et al, 한국과학기술원, 1995 |
1704 | 평균 유동을 고려한 모세관 내의 음향 전파 해석 = Acoustic analysis of capillary ducts with mean flowlink 정강원; Jeong, Kang-Won; et al, 한국과학기술원, 1995 |
1705 | 일반 평면 변형하의 복합재료 계면 균열 해석 = Analysis for interfacial crack in a laminated composite strip under generalized plane deformationlink 전인수; Jeon, In-Su; et al, 한국과학기술원, 1995 |
1706 | 4행정 직접분사식 성층화 엔진용 2유체 분사기의 운전조건에 대한 성능연구 = A study on 2-phase injector performance for operating conditions in 4-stroke direct-injection stratified-charge enginelink 장창수; Jang, Chang-Soo; et al, 한국과학기술원, 1995 |
1707 | 변위제어를 이용한 리드프레임과 에폭시수지 사이의 계명파괴인성치 측정 = Measurement of interfacial fracture toughness between lead frame and epoxy by using a displacement control testlink 임지혁; Lim, Ji-Hyuk; et al, 한국과학기술원, 1995 |
1708 | 형상 보강판의 진동및 음향 특성에 관한 연구 = A study on the vibro-acoustic characteristics of swaged panelslink 이종화; Lee, Jong-Hwa; et al, 한국과학기술원, 1995 |
1709 | 층류 화염에서의 중간생성물 ($C_2$,CH,OH Radicals) 측정 = Measurement of $C_2$,CH,OH radicals in the propane-air laminar flamelink 이우진; Lee, Woo-Jin; et al, 한국과학기술원, 1995 |
1710 | 전자석 구동기를 이용한 능동 엔진 마운트의 동적 해석 및 설계 = Dynamic analysis and design of active engine mount using magnetic actuatorlink 이용욱; Lee, Yong-Wook; et al, 한국과학기술원, 1995 |
1711 | 감가속 보상 하이두로폰의 강건 설계 = Robust design of an acceleration canceling hydrophonelink 이무열; Lee, Mu-Yeol; et al, 한국과학기술원, 1995 |
1712 | 난류 박리-재부착 유동에 대한 4-방정식 열전달 모형 = A low-reynolds-number 4-equation heat transfer model for turbulent separated and reattaching flowslink 이광훈; Rhee, Gwang-Hoon; et al, 한국과학기술원, 1995 |
1713 | 강건한 판요소 개발을 위한 회전 자유도 사각형 막요소의 개선 = Improvement of a quadrilateral membrane element with drilling DOFs for the development of robust plate elementslink 이강욱; Lee, Kang-Wook; et al, 한국과학기술원, 1995 |
1714 | 밀폐형 2상 자연 순환 회로의 유동 특성 = Flow characteristics of closed 2-phase natural circulation looplink 윤주웅; Yun, Ju-Ung; et al, 한국과학기술원, 1995 |
1715 | 광섬유센서를 넣은 지능형 복합재 구조물의 피로특성 = Fatigue characteristics of smart composite structures with embedded optical fiber sensorslink 윤상재; Yun, Sang-Jae; et al, 한국과학기술원, 1995 |
1716 | 도시 폐기물 소각로 연소실 내에서의 혼합과 반응에 대한 실험적, 수치적 연구 = Experimental and numerical studies on mixing and reaction in the municipal waste incineratorlink 류창국; Ryu, Change-Kook; et al, 한국과학기술원, 1995 |
1717 | 기판위에 균일하게 배열된 발열블럭 주위의 3차원 혼합대류 열전달 해석 = Analysis of 3D mixed convection flow about uniformly distributed heat-generating blocks on the boardlink 윤병택; Yun, Byeong-Taek; et al, 한국과학기술원, 1995 |
1718 | 혼합 근사에 의한 요소 내 힘 평형을 만족하는 3차원 곡선 보 요소의 개발 = Development of a 3-D curved beam element satisfying equilibrium equations based on the hellinger-reissner principlelink 오승환; Oh, Seung-Hwan; et al, 한국과학기술원, 1995 |
1719 | 하이드로폰의 감가속 특성개선을 위한 피에조관 분극에 관한 연구 = A study on piezo tube poling to improve acceleration canceling feature of a hydrophonelink 양욱진; Yang, Wook-Jin; et al, 한국과학기술원, 1995 |
1720 | 복합 구조물의 모형화 및 진동 특성의 해석에 관한 연구 = Dynamic modeling of multi-body structures and analysis of vibration characteristicslink 송창규; Song, Chang-Kyu; et al, 한국과학기술원, 1995 |