Search

Start a new search
Current filters:
Add filters:
  • Results/Page
  • Sort items by
  • In order
  • Authors/record

Results 1-10 of 12 (Search time: 0.005 seconds).

NO Title, Author(s) (Publication Title, Volume Issue, Page, Issue Date)
1
3차원 유한요소 모델을 이용한 핵연료-피복관 기계적 상호작용 해석 = 3D Finite element analysis of pellet to cladding mechanical interactionlink

서상규; Seo, Sang kyu; 양동열; Yang, Dong Yol, 한국과학기술원, 2015

2
유한요소법을 이용한 피로균열 닫힘거동 해석에서의 최적요소크기에 관한 연구 = A study on optimum element size for the simulation of fatigue crack closure behaviour by finite element methodlink

이창환; Lee, Chang-Hwan; 송지호; Song, Ji-Ho, 한국과학기술원, 1996

3
에어컨 실외기 열교환기 구조물의 굽힘 소성 가공 해석 및 설계 = Analysis and design of elastoplastic bending process for air conditioner outdoor unit heat exchangerslink

김문홍; Kim, Moon-Hong; 임세영; Im, Se-Young, 한국과학기술원, 2013

4
박판금속의 단열 전단밴드 생성에 대한 실험 및 유한요소 해석 = Experiment and finite element analysis of the formation of adiabatic shear band in sheet metallink

임지호; Lim, Ji-Ho; 허훈; Huh, Hoon, 한국과학기술원, 2000

5
회전 자유도를 갖는 삼차원 유한 요소의 성능 개선 = Improvement of a three dimensional finite element with rotational degrees of freedomlink

이정준; Lee, Jung-Joon; 이병채; 허훈; Lee, Byung-Chai; Huh, Hoon, 한국과학기술원, 1998

6
섬유강화 고부복합재 공기스프링의 3차원 유한요소 해석 = Three-dimensional finite element analysis of air springs with fiber-reinforced rubber compositeslink

신진원; Shin, Jin-Won; 허훈; Huh, Hoon, 한국과학기술원, 2000

7
유한요소법과 다구찌 방법을 이용한 Al 7001 T9 파이프의 롤러교정 공정 최적화 = Optimization of the roller levelling process for al 7001 T9 pipes with finite element method and taguchi methodlink

허진혁; Heo, Jin-Hyuck; 허훈; Huh, Hoon, 한국과학기술원, 2002

8
3차원 유한요소법을 이용한 등속조인트 고무 부트의 자체접촉해석 = Self contact analysis of rubber-boots for C. V. joints by a 3-D finite element methodlink

이형욱; Lee, Hyoung-Wook; 허훈; Huh, Hoon, 한국과학기술원, 1997

9
다구찌법을 이용한 구조물 강건 최적설계 소프트웨어의 개발 = A software for robust optimal design of structures using the Taguchi methodlink

이상훈; Lee, Sang-Hoon; 곽병만; Kwak, Byung-Man, 한국과학기술원, 1999

10
수치 모사를 통한 직접식 3차원 조형법의 금속 분말 적층부 소결에 관한 연구 = Numerical analysis for sintering of metal powder layers of the direct metal prototypinglink

손현기; Sohn, Hyon-Kee; 양동열; Yang, Dong-Yol, 한국과학기술원, 1996

rss_1.0 rss_2.0 atom_1.0