Browse "ME-Theses_Master(석사논문)" by Title 

Showing results 1601 to 1620 of 3882

1601
기본 고유진동수에 근거한 소형위성 접합부의 설계에 관한 연구 = A study on the design of the attachment of small satellites based on the fundamental frequencylink

유영웅; Yoo, Young-Woong; et al, 한국과학기술원, 1997

1602
기본형 맥동관 냉동기에 관한 실험적 연구 = An experimental study on the basic pulse tube refrigeratorlink

남관우; Nam, Kwan-Woo; et al, 한국과학기술원, 1998

1603
기어 백래쉬와 링크 유연성을 고려한 매니퓨레이터의 동적해석 = Dynamic analysis of manipulator considering gear backlash and link flexibilitylink

황창범; Hwang, Chang-Bum; et al, 한국과학기술원, 1994

1604
기어박스 구동시 회전수 변화에 따른 이 맞물림 주파수 소음/진동 성분의 증폭에 대한 실험적 연구 = An experimental study on tooth-meshing frequency components in noise/vibration of a gearbox under operational conditionslink

이성훈; Lee, Seong-Hun; et al, 한국과학기술원, 2000

1605
기울어진 벽을가진 용기내의 이중확산 대류열전달 = Double diffusive convection in an enclosure with a heated inclined side walllink

김종규; Kim, Jong-Gyu; et al, 한국과학기술원, 1995

1606
기존 밀링 머시인의 3차원 절삭을 위한 NC 화 = Three dimensional NC system development for the conventional milling machinelink

박근배; Park, Keun-Bae; et al, 한국과학기술원, 1982

1607
기준펄스 방식에 근거한 2관절 SCARA 아암의 실시간 동작 제어에 관한 연구 = A study on the real time motion control of the 2 DOF SCARA arm based on the reference pulse typelink

유석종; Yu, Seok-Jong; et al, 한국과학기술원, 1990

1608
기체-고체 반응기에서 열 전달 현상과 화학 반응의 상호 영향 - 니켈광 환원용 로터리 킬른 설계 응용 - = Interaction of heat transfer and chemical reaction in a gas-solid reactor : design application to rotary kiln for nickel ore reductionlink

엄민제; Eum, Min-Je; et al, 한국과학기술원, 2013

1609
기체층이 외부에 부착된 다중판의 차음 성능 = Sound transmission loss through the multilayered panel having the attached gas layer in the outer skinlink

서민영; SEO, MINYOUNG; et al, 한국과학기술원, 2015

1610
기판위에 균일하게 배열된 발열블럭 주위의 3차원 혼합대류 열전달 해석 = Analysis of 3D mixed convection flow about uniformly distributed heat-generating blocks on the boardlink

윤병택; Yun, Byeong-Taek; et al, 한국과학기술원, 1995

1611
기하 계획법을 이용한 최적 절삭 조건의 선정에 관한 연구 = On the selection of optimum machining conditions through geometric programming techniquelink

이봉희; Lee, Bong-Hee; et al, 한국과학기술원, 1979

1612
기하학적 계획법에 대한 최적화 기법의 연구 = Study on the optimization method for geometric programminglink

황건; Hwang, Kun; et al, 한국과학기술원, 1985

1613
기하학적 비선형을 고려한 보 구조물의 설계 민감도 해석 = Design sensivity analysis of beam structures with geometric nonlinearitylink

이원재; Lee, Won-Jae; et al, 한국과학기술원, 1994

1614
기하학적 특징을 이용한 3차원 형상의 합성 = Combination of three-dimensional geometric data using grometric characteristicslink

김남호; Kim, Nam-Ho; et al, 한국과학기술원, 1991

1615
기호 계산을 이용한 3차원 기구의 해석 = Kinematic and dynamic analysis of spatial mechanism using symbolic computationlink

이동민; Lee, Dong-Min; et al, 한국과학기술원, 1991

1616
긴 부분을 냉각시키는 폐쇄형 극저온 수술용 프로브의 개발 = Development of closed-loop cryoablation device for long area coolinglink

이천규; Lee, Cheon-Kyu; et al, 한국과학기술원, 2011

1617
깊은 3차원 CNN을 위한 채널, 공간, 시간 차원 분리 3차원 컨볼루션 = Channel, spatial and temporal separated 3D convolution for deep 3D CNNlink

변성미; 김경수; et al, 한국과학기술원, 2022

1618
꼭지점 검출 알고리즘을 이용한 이차원 물체 인식 시스템에 관한 연구 = A study of two dimensional objects recognition system using corner detection algorithmlink

마연수; Ma, Yeon-Soo; et al, 한국과학기술원, 1992

1619
나노 물질의 광학적 특성을 이용한 변형률 측정법 개발 = A novel method of strain measurement with optical properties of nano materialslink

장동원; Jang, Dong-Won; et al, 한국과학기술원, 2011

1620
나노 분해능 및 실시간 영상 획득이 가능한 파장 코딩된 슬릿 공초점 현미경에 관한 연구 = Spectrally encoded slit confocal micrcoscopy with nano-resolution and real-time imaging capabilitylink

김정민; Kim, Jeong-Min; et al, 한국과학기술원, 2006

rss_1.0 rss_2.0 atom_1.0