Browse "ME-Theses_Master(석사논문)" by Author 한순흥

Showing results 32 to 54 of 54

32
매크로 파라메트릭 방법론을 이용한 CAD 모델의 교환 = Exchange of CAD models using macro parametric approachlink

문두환; Mun, Du-Hwan; et al, 한국과학기술원, 2001

33
모델 스케일과 풀 스케일에서 풍력발전 시스템의 성능 실험과 시뮬레이션의 비교 = Comparison between experiment and simulation for wind power system at model scale and full scalelink

김혜빈; 한순흥; et al, 한국과학기술원, 2019

34
모션 데이터베이스 및 운동감 합성을 이용한 차량 시뮬레이터 = A driving simulator based on motion database and motion blendinglink

차무현; Cha, Moo-Hyun; 권동수; 한순흥; et al, 한국과학기술원, 2006

35
범용 전문가 시스템 쉘을 이용한 선박설계도면에서의 치수자동화 = Auto-dimensioning of ship arrangement plans based on an expert system shelllink

김재희; Kim Jae-Hee; et al, 한국과학기술원, 1997

36
복합다양체 자료구조를 갖는 형상모델러에서 오일러 작업자의 구현 = Implementation of the euler operators for a geometric modeler with non-manifold data structurelink

명세현; Myung, Se-Hyun; et al, 한국과학기술원, 1995

37
분산 지식베이스에 기반한 제품 설계 환경 = Product design based on distributed knowledge-baselink

복기소; Bok, Ki-So; et al, 한국과학기술원, 1998

38
사출성형 불량대책을 위한 지식베이스의 구축 = Construction of a knowledge-base for trouble-shooting in the injection molding processlink

최진성; Choi, Jin-Sung; et al, 한국과학기술원, 1995

39
상업용 부품 DB를 이용한 제품의 편집설계 = Configuration design of product using commercial part databaselink

이종묵; Lee, Jong-Mook; et al, 한국과학기술원, 2000

40
선박용 배관의 AUTO-ROUTING을 위한 설계전문가시스템 = Design expert system for auto-routing of ship hull pipeslink

강상섭; Kang, Sang-Seob; et al, 한국과학기술원, 1996

41
선택저장 자료구조를 이용한 복합다양체 모델의 불리언 작업 = Boolean operation of non-manifold model with the data structure of selective storagelink

유병현; Yoo, Byoung-Hyun; et al, 한국과학기술원, 1999

42
수정된 꼭지점 기반 자료구조에 대한 오일러 작업자와 불리안 작업자의 구현 = Implementation of euler operator/boolean operator with modified vertex based data structurelink

황진상; Hwang, Jin-Sang; et al, 한국과학기술원, 1997

43
스캐닝 점군을 활용한 기계장치의 데이터 기반 3D 애니메이션 = Data driven 3D animation of machinery using points cloudlink

노치호; 한순흥; et al, 한국과학기술원, 2019

44
웹 상에서 STEP 모델의 입체적 가시화 = Stereoscopic visualization of STEP model on the Weblink

함진호; Ham, Jin-Ho; et al, 한국과학기술원, 2000

45
웹 상에서 STEP 조립체 모델의 가시화 = Visualization of STEP assembly model on the weblink

이재철; Lee, Jae-Chul; et al, 한국과학기술원, 1999

46
인터넷에서 3차원 STEP 형상정보의 가시화 = Visualization of 3D STEP geometry data on the internetlink

오유천; Oh, Yu-Chon; et al, 한국과학기술원, 1997

47
인터넷에서 CORBA를 통한 STEP 모델 데이터베이스의 검색 = Retrieving a STEP model database through the CORBA on the internetlink

김준환; Kim Jun-Hwan; et al, 한국과학기술원, 1998

48
인터넷에서 VRML을 이용한 DEM의 3차원 가시화 = 3D Visualization of DEM using VRML on the internetlink

한능우; Han, Nung-Woo; et al, 한국과학기술원, 1997

49
중립 스키마를 활용한 PLM과 MES 간 3D 형상 및 mBOM의 교환 = Exchange of 3D shape and mBOM between PLM and MES using a neutral schemalink

남웅식; 한순흥; et al, 한국과학기술원, 2018

50
중립 포맷을 이용한 서로 다른 플랜트 CAD간 배관조립정보 변환 : PDMS to S3D = Translation of piping assembly information between different plant CADs using a neutral format : PDMS to S3Dlink

김유빈; 한순흥; et al, 한국과학기술원, 2018

51
충돌 시뮬레이션을 이용한 에어백 시스템의 최적설계 = An optimum design of airbag system based on crash simulationlink

전상기; Jeon, Sang-Ki; et al, 한국과학기술원, 1996

52
특징형상 온톨로지를 이용한 CAD시스템간 상호운용성의 향상 = Enhancement of CAD system interoperability based on feature ontologylink

이윤숙; Lee, Yoon-Sook; et al, 한국과학기술원, 2004

53
형상 모델러의 구현을 통한 표준 모델링 명령어 집합의 검증 = Verification of the standard modeling commands set by developing a geometric modelerlink

김병철; Kim, Byung-Chul; et al, 한국과학기술원, 2003

54
형상모델러를 이용한 유한요소 메쉬의 모델링 = Finite element modeling based on geometric modeling systemlink

조준면; Cho, Joon-Myun; et al, 한국과학기술원, 1995

rss_1.0 rss_2.0 atom_1.0