1 | CNC 밀링 정삭가공에서의 이송속도 최적화에 관한 연구 = A study on the feedrate optimization for finish in the CNC millinglink 오재욱; Oh, Jae-Wook; et al, 한국과학기술원, 2004 |
2 | CNC 밀링을 위한 실시간 이송속도 최적조정 시스템에 관한 연구 = A study on the real-time feedrate optimal adjustment system for CNC end millinglink 조재현; Cho, Jae-Hyun; et al, 한국과학기술원, 2003 |
3 | Flexibility가 있는 구동부에서의 서보제어에 관한 연구 = A study on the servo control of systems with flexibilitylink 김주민; Kim, Joo-Min; et al, 한국과학기술원, 2005 |
4 | Lagrangian을 이용한 공작기계의 Layout 정.동 특성에 관한 연구 = A study on static and dynamic evaluation of machine tools layout by lagrangianlink 김성운; Kim, Seong-Un; et al, 한국과학기술원, 2010 |
5 | Multiple laser beam absorption 을 이용한 유리 절단에 관한 연구 = A study on laser glass cutting using multiple laser beam absorptionlink 김성범; Kim, Seong-Beom; et al, 한국과학기술원, 2006 |
6 | Reference-pulse 방식에서 소프트웨어 보간에 관한 연구 = A study on the development of software reference-pulse interpolatorslink 홍원표; Hong, Won-Pyo; et al, 한국과학기술원, 1995 |
7 | V-그루브 미세 가공에서의 공구 및 공작물 셋업에 관한 연구 = A study on tool and workpiece setup in v-groove micromachininglink 조정우; Cho, Jung-Woo; et al, 한국과학기술원, 2006 |
8 | 가변간극 형상의 다이어프램을 갖는 외부가압 스러스트 공기 베어링의 능동제어 = Active control of externally pressuried thrust air bearings with a variable gap diaphragmlink 이동서; Lee, Dong-S.; 장평훈; 양민양; et al, 한국과학기술원, 1998 |
9 | 고속 CNC가공을 위한 이송율 최적화 및 NURBS 변환에 관한 연구 = A study on the feed optimization and NURBS tool path for CNC high speed machininglink 김수진; Kim, Su-Jin; et al, 한국과학기술원, 2000 |
10 | 고속 스핀들을 이용한 곡면의 고품위 가공에 관한 연구 = A study on high quality machining of curved surface using high speed spindlelink 김준영; Kim, Jun-Young; et al, 한국과학기술원, 1995 |
11 | 고효율 광섬유 결합된 고출력 다이오드 레이저의 설계 = Design of efficient fiber coupled high power laser diode arrayslink 노진성; Kno, Jin-Sung; et al, 한국과학기술원, 2008 |
12 | 공작기계 양센타간 자동 편차보정 시스템 개발 = Development of an automatic compensation system for errors between two centerslink 박진호; Park, Jin-Ho; et al, 한국과학기술원, 1996 |
13 | 공작기계의 고속 이송시의 동적 운동 정도에 관한 연구 = A study on the dyamic motion accuracy of machine tool in high feedratelink 오정후; Oh, Jung-Who; et al, 한국과학기술원, 1997 |
14 | 공작기계의 채터 강성 평가에 관한 연구 = A study on chatter stability evaluation of machine toolslink 정낙신; Jung, Nak-Shin; et al, 한국과학기술원, 2009 |
15 | 그라비아 인쇄법을 이용한 유연 OLED 소자 제작 = Gravure printed OLED on flexible substratelink 박지훈; Park, Ji-Hoon; et al, 한국과학기술원, 2010 |
16 | 기계가공 최적화를 위한 가이드 시스템에 관한 연구 = A study on guide system for optimization of machining processlink 최종근; Choi, Jong-Geun; et al, 한국과학기술원, 1989 |
17 | 레이저 간섭 직접 패터닝을 이용한 은 나노 패턴 제조 및 SERS 기판 응용에 관한 연구 = Fabrication of Ag nano pattern by laser interference direct patterning and its application for SERS substratelink 한규효; Han, Kyuhyo; et al, 한국과학기술원, 2016 |
18 | 레이저 응용 은 포토마스크 제조 및 병렬공정을 이용한 미세 전극 제조에 관한 연구 = A study on laser applied fabrication of ag photomask and fine electrodes using parallel processlink 윤진호; Youn, Jin-Ho; et al, 한국과학기술원, 2013 |
19 | 레이저 직접 패터닝을 이용한 메탈 메쉬 타입 터치 스크린 패널 개발 = Development of the Metal Mesh type Touch Screen Panel using Laser Direct Patterninglink 손석우; Son, Seok-Woo; et al, 한국과학기술원, 2014 |
20 | 레이저 패터닝을 이용한 고 전도성 구리전극 제조에 관한 연구 = Fabrication of high conductive copper electrode by laser patterninglink 박정환; Park, Jung-Hwan; et al, 한국과학기술원, 2014 |
21 | 머신 비젼을 이용한 고정밀 CNC 공구연삭 시스템에 관한 연구 = A study on high-precision CNC tool grinding system using machine visionlink 윤홍석; Youn, Hong-Seok; et al, 한국과학기술원, 2005 |
22 | 밀링 가공시 주축 회전수를 고려한 절삭력 적응 제어 = Adaptive cutting force control for end milling by considering spindle's RPMlink 이경훈; Lee, Kyung-Hoon; et al, 한국과학기술원, 2002 |
23 | 볼 앤드 밀 곡면 가공의 절삭기구 및 절삭력 예측에 관한 연구 = A study on the cutting mechanism and prediction of cutting forces in ball-end milling processlink 전용태; Jun, Yong-Tae; et al, 한국과학기술원, 1990 |
24 | 볼 앤드 밀에 의한 곡면가공의 절삭력 예측에 관한연구 = A study on the prediction of cutting forces in ball-end milling processlink 박희덕; Park, Hee-Duk; et al, 한국과학기술원, 1989 |
25 | 볼스크류 고정밀가공의 셋팅오차 해석과 양센타간 편차측정 및 보정시스템 개발 = Analysis of setting errors and development of the measurement and adjustment system of the alignment error between both centers for precise ballscrew machininglink 이용준; Lee, Yong-Jun; et al, 한국과학기술원, 1995 |
26 | 블레이드 코팅법을 이용한 PLED 소자 제조에 관한 연구 = The study on all-blade coated PLEDlink 김지용; Kim, Ji-Yong; et al, 한국과학기술원, 2011 |
27 | 사출금형 가공시간 예측에 관한 연구 = A study on the estimation of machining time for injection moldslink 김창용; Kim, Chang-Yong; et al, 한국과학기술원, 2001 |
28 | 선삭 가공에서의 칩 및 채터 감지에 관한 연구 = A study on chip and chatter monitoring in turning processlink 이석원; Lee, Seok-Won; et al, 한국과학기술원, 1993 |
29 | 선삭가공용 자동 프로그래밍 시스템의 개발에 관한 연구 = A study on the development of automatic programming system for turninglink 이성찬; Lee, Sung-Chan; et al, 한국과학기술원, 1993 |
30 | 스테레오 비전을 이용한 자유곡면의 CAM 시스템에 관한 연구 = A study on CAM system for free-form surface using stereo visionlink 유진규; Yoo, Jin-Gyoo; et al, 한국과학기술원, 1990 |
31 | 스파이럴 베벨 기어의 측정 및 가공 오차 보정에 관한 연구 = A study on the measurement and error-correction of the spiral bevel gearlink 조용대; Cho, Yong-Dae; et al, 한국과학기술원, 1996 |
32 | 시작 금형의 고속가공을 위한 복합재료 개발에 관한 연구 = A study on the development of composites for the high-speed machining of the prototypal moldslink 류상길; Ryu, Sang-Gil; et al, 한국과학기술원, 2000 |
33 | 신경망을 이용한 최적절삭조건부여 시스템 개발 = Development of an optimum cutting condition decision system by neural networklink 김현철; Kim, Hyun-Chul; et al, 한국과학기술원, 2001 |
34 | 압연균질 장갑강의 모따기 가공에서 최적 절삭 조건에 대한 연구 = A Study on optimal cutting condition of chamfer milling for rolled homogeneous armor steellink 박상규; Park, Sang-Kyu; et al, 한국과학기술원, 2014 |
35 | 와이어커트 방전가공 NC 프로그램의 검증 및 수정 = Verification and editing of wire-EDM NC-programslink 이응기; Lee, Eung-Ki; et al, 한국과학기술원, 1994 |
36 | 요동형 캠 기구를 이용한 평판 캠 측정 시스템의 개발에 관한 연구 = A study on the development of measurement system of planar cam by oscillating roller cam mechanismlink 정의원; Jung, Ui-Won; et al, 한국과학기술원, 2000 |
37 | 용액공정을 이용한 유연 OLED 개발에 관한 연구 = A study on flexible OLED development with solution processlink 신성범; Shin, Seong-Beom; et al, 한국과학기술원, 2012 |
38 | 윤곽오차를 줄이기 위한 CNC 서보 제어에 관한 연구 = A study on CNC servo control for reducing the contour errorlink 정경석; Jeong, Kyeong-Seok; et al, 한국과학기술원, 2004 |
39 | 인식점수의 궤환을 통한 음성 및 화자인식 시스템의 구현에 관한 연구 = A study on realization of speech and speaker recognition system based on feedback of recognition valuelink 김현구; Kim, Hyun-Goo; et al, 한국과학기술원, 2005 |
40 | 저온공정에 기반한 고전도 고안정 은 나노와이어 투명전극 제작에 관한 연구 = A study on fabrication of ag nanowire transparent electrode at low temperature for high conductivity and stabilitylink 백승아; Back, Seung-A; et al, 한국과학기술원, 2014 |
41 | 적응 구성형 캠 가공 시스템의 개발에 관한 연구 = A study on the development of the reconfigurable machining system for various types of camslink 허인국; Heo, In-Guk; et al, 한국과학기술원, 2000 |
42 | 적응다변형모델을 이용한 가공경로 생성에 관한 연구 = A study on the toolpath generation using adaptive polygon modellink 이언수; Lee, Un-Su; et al, 한국과학기술원, 1996 |
43 | 절삭공구의 피복층이 공구마멸에 미치는 영향에 대한연구 = Study on effects of coatings on cutting tool wearlink 손태영; Shon, Tae-Young; et al, 한국과학기술원, 1989 |
44 | 주파수합성을 이용한 정전용량형 gap 센서에 관한 연구 = A study on capacitance type gap sensor using frequency mixinglink 박남수; Park, Nam-Su; et al, 한국과학기술원, 1996 |
45 | 중소형 CIM을 위한 공구관리 시스템의 개발에 관한 연구 : 금형공장의 사례중심 = A study on the developement of tool management system for small & medium size CIM : mainly on mold industrylink 정태성; Jung, Tae-Sung; et al, 한국과학기술원, 1998 |
46 | 초음파 화학 가공을 이용한 전극봉 제작 및 미세 구멍의 방전 가공에 관한 연구 = A study on ultrasonic-assisted chemcial machining of fine rod and micro-hole drilling by EDMlink 윤재웅; Yoon, Jae-Woong; et al, 한국과학기술원, 1990 |
47 | 초정밀 비구면 가공용 CAM 소프트웨어 개발에 관한 연구 = A study on the development of CAM software for ultra-precision aspheric surfacelink 이택민; Lee, Taik-Min; et al, 한국과학기술원, 1997 |
48 | 친환경 절삭을 위한 정전 분무 윤활에 관한 연구 = A study on electrostatic spray lubrication for eco-friendly cuttinglink 신광섭; Shin, Kwang-Sup; et al, 한국과학기술원, 2008 |
49 | 컴퓨터 비젼 및 패턴인식 기법을 이용한 공구상태 판정 시스템 개발 = Tool condition monitoring technique using computer vision and pattern recognitionlink 권오달; Kwon, Oh-Dal; 양민양; 오준호; et al, 한국과학기술원, 1992 |
50 | 컴퓨터 비젼을 이용한 공구 마모의 측정과 공구 파손의 검출에 관한 연구 = A study on tool wear measurement and tool failure detection using computer visionlink 허경회; Heo, Kyung-Hoe; et al, 한국과학기술원, 1991 |
51 | 평판 캠 및 입체 캠을 위한 CAD/CAM 소프트웨어 개발에 관한 연구 = A study on development of CAD/CAM software for plate cams and spatial camslink 김찬봉; Kim, Chan-Bong; et al, 한국과학기술원, 1991 |
52 | 프린팅 공정을 이용한 가스센서 제작 = Production of gas sensor using printing technologylink 전강민; Jeon, Kang-Min; et al, 한국과학기술원, 2007 |
53 | 피복 벨트 연마를 이용한 경면 가공에 관한 연구 = A study on mirror surface finishing using coated abrasive belt grindinglink 심완섭; Sim, Wan-Seub; et al, 한국과학기술원, 1991 |
54 | 피스톤 링의 열탄성 유체 윤활 해석 = Thermo-elastohydrodynamic analysis of piston ringslink 김재현; Kim, Jae-Hyun; 양민양; 최상민; et al, 한국과학기술원, 1998 |