1 | 2차원 강소성 유한요소해석에서의 안정성 및 효율성 향상에 관한 연구 = Improvement of stability and efficiency in two-dimensional rigid-plastic finite element methodlink 박근; Park, Khun; et al, 한국과학기술원, 1994 |
2 | 3차원 단조공정에서의 예비형상 설계에 관한 연구 = A study on the preform design in 3-D forginglink 신현기; Shin, Hyun-Ki; et al, 한국과학기술원, 2002 |
3 | 3차원 유한요소 모델을 이용한 핵연료-피복관 기계적 상호작용 해석 = 3D Finite element analysis of pellet to cladding mechanical interactionlink 서상규; Seo, Sang kyu; et al, 한국과학기술원, 2015 |
4 | 3차원 표면의 컬러 인쇄를 위한 공정 변수 영향 분석에 관한 연구 = Influence of process parameters on three-dimensional surface coloringlink 송민섭; Song, Min-Sup; et al, 한국과학기술원, 2005 |
5 | 3차원 형재의 후방 압출 해석 = Analysis of backward extrusion for three-dimensional shapeslink 한철호; Han, Chul-Ho; et al, 한국과학기술원, 1980 |
6 | (A) study on the new extrusion-forging processes = 새로운 압출-단조 공정에 관한 연구link Yang, Dong-Yol; 양동열; et al, 한국과학기술원, 1975 |
7 | Development of a flexible incremental forming process to manufacture asymmetric shafts = 비대칭 축류형 제품의 점진성형공정 개발link Altun, Ali Ozhan; Yang, Dong-Yol; et al, 한국과학기술원, 2005 |
8 | EVA(ethylene vinyl acetatecopolymer)를 이용한 가변 용착 쾌속 조형 공정 개발에 관한 연구 = Development of variable deposition manufacturing for ethylene vinyl acetatecopolymerlink 이상호; Lee, Sang-Ho; et al, 한국과학기술원, 2000 |
9 | Investigation into design of pyramidal kagome structure and its mechanical properties = 피라미드형 카고메 구조의 설계와 기계적 물성에 대한 연구link Hahm, Sung-seek; 함성식; et al, 한국과학기술원, 2014 |
10 | L 단면 형상환상압연공정에서의 토르크에 대한 이론적 고찰및 실험과의 비교 = Theoretical predictions and comparisons with experiment for torque in L-section profile ring rollinglink 류장수; Ryu, Jang-Soo; et al, 한국과학기술원, 1980 |
11 | Method of Weighted Residuals 를 이용한 곡면 금형의 축 대칭 전방 압출 = Analysis of axisymmetric extrusion through curved dies by using the method of weighted residualslink 조종래; Cho, Jong-Rae; et al, 한국과학기술원, 1984 |
12 | U 단면 형상 환상 압연 공정에 있어서 채워 지지 않은 상태에 대한 압연 토르크 해석 = Analysis of roll torque in U-section profile ring rolling-unfilled stagelink 장춘수; Chang, Choon-Soo; et al, 한국과학기술원, 1981 |
13 | VLM-ST 제품의 국부 형상 정밀도 향상을 위한 후가공 공정 개발에 관한 연구 = Development of a post-processing system to improve geometrical precision of the detailed shape in VLM-ST partslink 김효찬; Kim, Hyo-Chan; et al, 한국과학기술원, 2003 |
14 | 간극 요소를 이용한 3차원 핵 연료봉의 해석 = 3D FE analysis of nuclear fuel rod with gap elements between the pellet and claddinglink 강창학; Kang, Chang-Hak; et al, 한국과학기술원, 2014 |
15 | 강소성 유한 요소법에 의한 높은 단면 감소율을 가진 평면 변형도 환상압연의 해석 = Rigid-plastic finite element analysis of high reduction plane strain ring rollinglink 김광희; Kim, Kwang-Heui; et al, 한국과학기술원, 1985 |
16 | 강소성재료의 소성가공에 있어서 지능형 CAE를 위한 적응격자구성 및 재구성에 관한 연구 = A study on adaptive mesh generation and remeshing for intelligent CAE of metal forming processes using rigid-plastic material modelinglink 이창희; Lee, Chang-Hui; et al, 한국과학기술원, 1997 |
17 | 객체지향 프로그래밍 기법을 이용한 단조공정의 유한요소 해석 결과 가시화에 관한 연구 = Visualization of finite element analysis for forging processes by using object-oriented programming techniquelink 박철현; Park, Chul-Hyun; et al, 한국과학기술원, 1998 |
18 | 격자압축법을 이용한 3차원 단조공정해석 = 3-D analysis of hot forging processes using the mesh compression methodlink 홍진태; Hong, Jin-Tae; et al, 한국과학기술원, 2001 |
19 | 경사진 돌출부가 있는 비축대칭 복합 단조의 해석 = Analysis of combined forging of non-axisymmetric shapes with inclined protrusionslink 윤정호; Yoon, Jeong-Ho; et al, 한국과학기술원, 1986 |
20 | 곡면 형상을 가진 금형에 의한 축대칭 단조의 유한 요소 해석 = Finite element analysis of axisymmetric forging by curved dieslink 박용복; Park, Yong-Bok; et al, 한국과학기술원, 1987 |
21 | 곡선 속도 불연속 패턴을 이용한 환상 압연 해석 = Analysis of plane strain ring rolling by using curved tangential velocity discontinuity patternslink 이낙규; Lee, Nag-Kyu; et al, 한국과학기술원, 1987 |
22 | 공기압 서어보 시스템의 시뮬레이션 프로그램 개발 = On the development of a simulation program for pneumatic servo systemslink 채운용; Chai, Yoon-Yong; 양동열; 조형석; et al, 한국과학기술원, 1986 |
23 | 공기압 위치제어를 위한 부하적응 제어기에 관한 연구 = A study on a load adaptive controller for pneumatic position controllink 이순걸; Lee, Soon-Geul; 조형석; 양동열; et al, 한국과학기술원, 1985 |
24 | 광구동 시스템의 정밀 위치 제어를 위한 탄성 나노 링크의 설계 및 제작에 관한 연구 = Investigation into precise control of optically driven system using elastic nano-linklink 정유진; Jeong, Yu-Jin; et al, 한국과학기술원, 2010 |
25 | 구속 환상 압연에 있어서 행렬 방법에 의한 슬립라인해 = A slip line solution for the constrained ring rolling process using a matrix methodlink 여승동; Yeo, Seung-Dong; et al, 한국과학기술원, 1981 |
26 | 구속이 없는 피어싱 공정의 유한 요소 해석 = Finite element analysis of unconstrained axisymmetric piercinglink 유요한; Yoo, Yo-Han; et al, 한국과학기술원, 1986 |
27 | 구속환상 압연에 관한 실험 및 이론적 연구 = An experimental and thoretical study on the comstrained ring-rolling processlink 이상록; Lee, Sang-Rok; et al, 한국과학기술원, 1980 |
28 | 국소 가열 방법을 이용한 2 단계 축대칭 디프드로잉 공정의 해석 및 설계 = Finite element analysis and design of axisymmetric deep drawing process by local heatinglink 이동우; Lee, Dong-Woo; et al, 한국과학기술원, 1992 |
29 | 굽힘 하중을 받는 딤플형 내부구조 금속 샌드위치 판재의 최적설계 = Optimal design of metallic sandwich plates with inner dimpled shell structure subject to bending momentlink 성대용; Seong, Dae-Yong; et al, 한국과학기술원, 2005 |
30 | 금속 재료를 이용한 직접식 3차원 형상 제조 공정의 실험적 연구 = Experimental study of direct metal prototyping processlink 신민철; Shin, Min-Chull; et al, 한국과학기술원, 1995 |
31 | 내압을 받는 튜브 리듀싱에 관한 연구 = Study on the tube reducing process subject to internal pressurelink 이항수; Lee, Hang-Soo; et al, 한국과학기술원, 1987 |
32 | 냉간압접의 접합기구에 대한 연구 = A study on the bonding mechanism of cold pressure weldinglink 김영은; Kim, Young-Eun; et al, 한국과학기술원, 1980 |
33 | 다공성 박판의 온간 성형공정에 관한 연구 = Study on the warm press forming processed for perforated sheet metallink 문양호; Moon, Yang-Ho; et al, 한국과학기술원, 1993 |
34 | 단속형 가변 적층 쾌속 조형 공정(VLM-ST)을 위한 정밀도 향상에 관한 연구 = Accuracy improvement in transfer-type variablelamination manufacturing process using expandable polystyrene foamlink 최홍석; Choi, Hong-Seok; et al, 한국과학기술원, 2002 |
35 | 단위체 격자 재구성 기법을 이용한 2차원 냉간 단조의 유한 요소해석 = Finite element analysis of two-dimensional cold forging by using modular remeshinglink 김영태; Kim, Yeong-Tae; et al, 한국과학기술원, 1990 |
36 | 단위체 격자 재구성법과 전문가 시스템을 이용한 2차원 냉간 단조의 유한 요소 해석 = Finite element analysis of two-dimensional cold forging by using modular remeshing and expert systemlink 윤희도; Yun, Hee-Do; et al, 한국과학기술원, 1991 |
37 | 디지털 영상 합성법을 사용한 X선 단층 영상 시스템의 해석 및 설계 = The analysis and design of X-ray cross-sectional imaging system using digital tomosynthesislink 노영준; Roh, Young-Jun; 양동열; 조형석; et al, 한국과학기술원, 1997 |
38 | 로우터리 서어보 액튜에이터의 특성 해석 및 성능 향상에 대한 연구 = A study on the performance improvement and the dynamic characteristics of the rotary servo actuatorlink 진성무; Chin, Seong-Mu; 조형석; 양동열; et al, 한국과학기술원, 1985 |
39 | 박판 성형을 위한 새로운 수치제어식 시작 방법의 개발 = Development of a new NC-controlled trial manufacturing process for sheet metal forminglink 조철훈; Cho, Cheol-Hoon; et al, 한국과학기술원, 1997 |
40 | 박판 주조공정에서 공정의 특성 해석 및 공정 변수 선정에 관한 연구 = Analysis and parameter design of strip casting processeslink 배세철; Bae, Sei-Chul; 양동열; 조형석; et al, 한국과학기술원, 1997 |
41 | 박판 페어의 기계적 접합을 위한 공정에 관한 연구 = Study on the mechanical joining process of a sheet metal pairlink 윤희주; Yoon, Hee-Ju; et al, 한국과학기술원, 2002 |
42 | 박판금속성형에 있어서 곡선절곡에 관한 연구 = A study on curved line folding in sheet metal workinglink 이정우; Lee, Jeong-Woo; et al, 한국과학기술원, 1985 |
43 | 박판의 점진적 성형 공정의 성형성 향상에 대한 연구 = Study on the improvement of formability for incremental sheet metal forminglink 김태정; Kim, Tae-Jeong; et al, 한국과학기술원, 1998 |
44 | 반구형 펀치에 의한 Stretch-forming 의 마찰을 고려한 해석 = Analysis of stretch-forming by hemispherical punch with frictionlink 심현보; Shim, Hyun-Bo; 양동열; 이중홍; et al, 한국과학기술원, 1983 |
45 | 벨로우즈 성형 공정에 관한 연구 = A study on the bellows forming processlink 이상욱; Lee, Sang-Wook; et al, 한국과학기술원, 1988 |
46 | 복합 봉재의 전방 압출에 관한 연구 = A study on the forward extrusion of composite rodslink 김영규; Kim, Young-Giu; et al, 한국과학기술원, 1980 |
47 | 복합관의 전방압출에 관한 연구 = A study on the forward extrusion of composite tubeslink 김종호; Kim, Jong-Ho; et al, 한국과학기술원, 1980 |
48 | 분리된 원주압보조 액압유도 역 재드로잉 공정에 관한 연구 = Study on the hydromechanical reverse redrawing process assisted by separated radial pressurelink 김종봉; Kim, Jong-Bong; et al, 한국과학기술원, 1995 |
49 | 비원형 튜브 형재의 후방 압출에 대한 실험식 유도에 관한 연구 = Some practical load formulae for backward extrusion of non-circular tubes on the basis of experimentslink 우호길; Woo, Ho-Kil; et al, 한국과학기술원, 1980 |
50 | 사면체 공동 기반의 플라스틱 샌드위치 소재의 설계에 대한 연구 = Sandwich construction composed of PP face and core with tetrahedral cavitieslink 이동효; Lee, Dong-Hyo; et al, 한국과학기술원, 2016 |
51 | 선택적 membrane/shell 요소를 이용한 2차원 스트레칭 공정의 탄소성 유한요소해석 = Elastic-plastic finite element analysis of 2-D stretch forming by using the selective membrane/shell elementslink 정상보; Jung, Sang-Bo; et al, 한국과학기술원, 1991 |
52 | 소결 금속의 압출에 관한 연구 = A study on the extrusion of sintered porous metallink 이정근; Lee, Jeong-Keun; 양동열; 오흥국; et al, 한국과학기술원, 1983 |
53 | 소성 가공에 있어서 변형 가시화법에 대한 연구 = A study on the visioplasticity method in the bulk deformationlink 배덕한; Bae, Duck-Han; et al, 한국과학기술원, 1984 |
54 | 수치 모사를 통한 직접식 3차원 조형법의 금속 분말 적층부 소결에 관한 연구 = Numerical analysis for sintering of metal powder layers of the direct metal prototypinglink 손현기; Sohn, Hyon-Kee; et al, 한국과학기술원, 1996 |
55 | 순차 이송 금형의 컴퓨터 원용 설계에 관한 연구 = A study on the computer aided design of progressive dieslink 노태성; Noh, Tae-Sung; et al, 한국과학기술원, 1984 |
56 | 열간 단조에서의 최적 예비형상 설계 = Optimal design of preform in hot forginglink 이석렬; Lee, Souk-Ryol; et al, 한국과학기술원, 2000 |
57 | 열간 반경 단조의 2차원 유한 요소 해석 = Two-dimensional finite element analysis of hot radial forginglink 박치용; Park, Chi-Yong; et al, 한국과학기술원, 1990 |
58 | 외연적 강소성 유한 요소법을 이용한 2차원 박판 성형 공정의 해석 = Two-dimensional analysis of sheet metal processes by the rigid-plastic explicit finite element methodlink 안동규; Ahn, Dong-Gyu; et al, 한국과학기술원, 1994 |
59 | 원추형 금형을 이용한 박막식 정수압 압출에 관한 연구 = A study on the hydrofilm hydrostatic extrusion through conical dieslink 신동헌; Shin, Dong-Hun; et al, 한국과학기술원, 1981 |
60 | 원추형 금형을 통한 압출에 있어서 변형장에 관한 연구 = A study on the deformation field of extrusion through conical dieslink 류병우; Ryu, Byung-Woo; 양동열; 오흥국; et al, 한국과학기술원, 1983 |