Browse "ME-Theses_Master(석사논문)" by Author Youn, Jae-Ryoun

Showing results 1 to 14 of 14

1
Adhesive tubular single lap joint의 최적 설계 = Optimal design of the adhesive tubular single lap jointlink

최진호; Choi, Jin-Ho; 윤재륜; 이대길; et al, 한국과학기술원, 1991

2
반응사출성형을 위한 폴리우레탄 포움의 성형 = Processing of polyurethane foam for reaction injection moldinglink

조우종; Cho, Woo-Jong; et al, 한국과학기술원, 1992

3
삼차원 입체 인쇄 성형물의 변형모사에 관한 연구 = A study on simulation of the deformation of 3-D stereolithography productslink

이정현; Lee, Jung-Hyun; et al, 한국과학기술원, 1994

4
세라믹 사출형성에서 게이트 크기의 효과 = Effect of gate size on ceramic injection moldinglink

이상찬; Lee, Sang-Chan; et al, 한국과학기술원, 1991

5
세라믹 사출형성을 위한 질화규소 미세 분말의 혼합성능에 대한 특성 연구 = Characterization of mixing performance of $Si_3N_4$ fine powder for ceramic injection moldinglink

고진; Ko, Jin; et al, 한국과학기술원, 1990

6
세라믹 사출형성을 위한 혼합에 대한 연구 = A study on mixing for ceramic injection moldinglink

장인철; Chang, In-Cheol; et al, 한국과학기술원, 1991

7
영상처리를 이용한 복합재료내의 단섬유 배열상태의 특성화 = Characterization of the alignment of short fibers in composites by image processinglink

김창근; Kim, Chang-Kuen; et al, 한국과학기술원, 1993

8
유한요소법을 이용한 평면 방향으로의 사출성형 해석 = Numerical analysis of injection molding processing in plane direction using a finite element methodlink

정준호; Jeong, Jun-Ho; et al, 한국과학기술원, 1993

9
자동차 터보 엔진용 세라믹 로터의 사출 성형에 대한 연구 = A study on injection molding of ceramic rotor for automobile turbo-enginelink

심민식; Shim, Min-Sik; et al, 한국과학기술원, 1992

10
초음파 가진을 이용한 폴리우레탄 미세포 포움의 가공 = Processing of polyurethane microcellular foam by ultrasonic excitationlink

박혁; Park, Hyeog; et al, 한국과학기술원, 1990

11
초음파를 이용한 고분자 포움의 가공 = Ultrasonic processing of polymer foamlink

변성광; Byeon, Seong-Kwang; et al, 한국과학기술원, 1989

12
탄소 및 유리 단섬유 보강 복합재료의 마찰 마모 거동 = Tribological behavior of short fiber reinforced poly(amide-imide) compositeslink

이기현; Lee, Kee-Hyun; et al, 한국과학기술원, 1990

13
탄소/탄소 복합재료의 마찰 및 마모 거동과 신경회로망에의 적용에 관한 연구 = Friction and wear behavior of carbon/carbon composite materials and its application to a neural networklink

류병진; Ryu, Byeong-Jin; et al, 한국과학기술원, 1994

14
항공기 브레이크용 탄소/탄소 복합재료의 마찰 및 마모에 대한 연구 = A study on friction and wear of carbon/carbon composites for aircraft brake applicationlink

우성택; Woo, Seong-Teg; et al, 한국과학기술원, 1993

rss_1.0 rss_2.0 atom_1.0