1 | A study on the electrical resistance of carbon/phenolic composite bipolar plates for PEMFC = 고분자 전해질 연료전지용 카본/페놀 복합재료 분리판의 전기저항에 관한 연구link Kim, Min-Kook; 김민국; et al, 한국과학기술원, 2013 |
2 | (A) Study on the improvement of fracture toughness of stainless steel adhesive joints at cryogenic temperature = 스테인리스 강철 접착조인트의 극저온 파괴인성 향상에 관한 연구link Hwang, Yun-Jeong; 황윤정; et al, 한국과학기술원, 2012 |
3 | (A) study on the torque chracteristics of the composite cocured single lap joint = 복합 재료 동시 경화 조인트의 토크 특성 연구link Lee, Seung-Woo; 이승우; et al, 한국과학기술원, 1996 |
4 | Adhesive joining을 이용한 harmonic drive의 flexspline의 설계 및 제조 = Design and manufacturing of the flexspline of a harmonic drive with adhesive joininglink 오희석; Oh, Hee-Seok; et al, 한국과학기술원, 1993 |
5 | Adhesive tubular single lap joint의 최적 설계 = Optimal design of the adhesive tubular single lap jointlink 최진호; Choi, Jin-Ho; 윤재륜; 이대길; et al, 한국과학기술원, 1991 |
6 | Autoclave vacuum bag degassing 방법에 의한 탄소섬유 에폭시 복합재료 경화의 최적화를 위한 연구 = A study on the optimum curing for carbon fiber / Epoxy composites by autoclave vacuum bag degassing processlink 손성용; Son, Sung-Yong; et al, 한국과학기술원, 1992 |
7 | Composite impact absorbing structure for the primary barrier of LNG cargo containment systems = 액화천연가스 저장시스템의 복합재료 충격 흡수 구조체link Choe, Jaeheon; 최재헌; et al, 한국과학기술원, 2015 |
8 | Development of a failure model for the adhesively bonded tubular single lap joint = 원형 Single Lap 접착 조인트의 파괴모델에 관한 연구link Lee, Su-Jeong; 이수정; et al, 한국과학기술원, 1993 |
9 | Development of the bipolar plate made of a carbon fiber/epoxy composite for polymer electrolyte membrane fuel cells = 탄소 섬유/에폭시 복합재료를 이용한 연료전지용 분리판 개발에 관한 연구link Hwang, In-Uk; 황인욱; et al, 한국과학기술원, 2009 |
10 | Development of the light weight insert for composite sandwich satellite structures = 복합재료 샌드위치 인공위성용 경량 인서트의 개발link Lim, Jun-Woo; 임준우; et al, 한국과학기술원, 2010 |
11 | Development of the low-observable radomes composed of aramid/epoxy composite sandwich structure and frequency selective surface = 아라미드/에폭시 복합재료 샌드위치 구조와 주파수 선택적 투과막을 이용한 저피탐지 레이돔 개발에 관한 연구link Choi, Ilbeom; 최일범; et al, 한국과학기술원, 2012 |
12 | Dielectrometry에 의한 탄소섬유 / 에폭시 복합재료의 cure monitoring 연구 = A study on the cure monitoring of the carbon fiber / epoxy composite with dielectrometrylink 김진수; Kim, Jin-Soo; et al, 한국과학기술원, 1992 |
13 | Effects of ultraviolet surface treatment on adhesion strength of carbon/epoxy composite = 자외선 표면처리가 탄소섬유/에폭시 복합재료의 접착강도에 미치는 영향link Kim, Jong-Min; 김종민; et al, 한국과학기술원, 2003 |
14 | Hybrid composite을 위한 bolted joint의 최적 설계에 관한 연구 = A study on optimum bolted joints for hybrid compositeslink 오제훈; Oh, Je-Hoon; et al, 한국과학기술원, 1997 |
15 | Hybrid metal/composite automobile propeller shaft = 차량용 금속/복합재료 하이브리드 프로펠러 샤프트link Nils Maximilian, Demski; Lee, Dai Gil; et al, 한국과학기술원, 2016 |
16 | Improvement of cryogenic performance of polyurethane adhesive joints with chopped glass fibers = 유리 단 섬유 보강을 통한 폴리우레탄 접착 조인트의 극저온 성능 향상에 관한 연구link Nam, Soohyun; 남수현; et al, 한국과학기술원, 2015 |
17 | LNG 선박용 저장 탱크의 충격 절감 구조의 공리설계 = Axiomatic design of impact reducing system for LNG cargo system of LNG shiplink 김기현; Kim, Ki-Hyun; et al, 한국과학기술원, 2011 |
18 | RTM (resin transfer molding)을 이용한 비굴착 지하매설관 갱생 공법 = Trenchless rehabilitation technology of underground pipes with resin transfer moldinglink 진우석; Chin, Woo-Seok; et al, 한국과학기술원, 2002 |
19 | 고강성 고감쇠 복합재료 보링바에 관한 연구 = A study on the high stiffness and high damping compoiste boring barlink 황희윤; Hwang, Hui-Yun; et al, 한국과학기술원, 2002 |
20 | 고배속 데이터 재생장치를 위한 고분자 진동 댐퍼에 관한 연구 = A study on the polymer vibration damper for high speed data regenerating deviceslink 장승환; Chang, Seung-Hwan; et al, 한국과학기술원, 1997 |
21 | 고속 직기용 복합재료 헤들 프레임의 설계 = Design of a composite heddle frame for high-speed loomslink 이창섭; Lee, Chang-Sup; et al, 한국과학기술원, 2000 |
22 | 고속전철 구조물을 위한 Composite-steel shell 접착조인트의 최적설계에 관한 연구 = Adhesively-bonded lap joints for the composite-steel shell structure of high speed vehicleslink 신금철; Shin, Kum-Cheol; et al, 한국과학기술원, 1997 |
23 | 금속과 복합재료를 사용한 자동차용 일체형 드라이브샤프트의 설계와 제작에 관한 연구 = A study on the design and the manufacture of the automotive one-piece driveshaft with metal and composite materialslink 조덕현; Cho, Durk-Hyun; et al, 한국과학기술원, 1996 |
24 | 마이크로웨이브를 이용한 단열재용 페놀폼의 개발 = Development of microwave foaming method for phenolic insulation foamslink 김부기; Kim, Bu-Gi; et al, 한국과학기술원, 2008 |
25 | 범용 CNC 공작기계를 이용한 스크류 로터 제작에 관한 연구 = A study on the manufacturing of screw rotors using general CNC milling machineslink 서정도; Suh, Jung-Do; et al, 한국과학기술원, 2000 |
26 | 변형률 속도에 따른 유리섬유 에폭시 복합재료의 특성에 관한 연구 = A study on the characteristics of glass fiber epoxy composites with respect to strain rateslink 임태성; Lim, Tae-Seong; et al, 한국과학기술원, 2000 |
27 | 복합재료 toecap의 정적 및 충격 특성에 관한 연구 = A study on the static and impact characteristics of composite toecaplink 이승민; Lee, Seung-Min; et al, 한국과학기술원, 2005 |
28 | 복합재료 가이드 롤러에 관한 연구 = A study on the composite guide rollerslink 방경근; Bang, Kyung-Guen; et al, 한국과학기술원, 1998 |
29 | 비례 복합 밸브 내의 솔레노이드의 특성에 관한 연구 = Study on the solenoid characteristics of a hydraulic proportional compound valvelink 이대길; Lee, Dai-Gil; et al, 한국과학기술원, 1977 |
30 | 선박용 에폭시 도료의 열물성 및 표면처리가 방청효과에 미치는 영향 = Effects of thermo-mechanical property and surface treatment on the anti-corrosion property of the marine epoxy paintlink 김병철; Kim, Byung-Chul; et al, 한국과학기술원, 2005 |
31 | 알루미나 성형체의 미소구멍가공에 관한 연구 = Micro-drilling of alumina green bodylink 이학구; Lee, Hak-Gu; et al, 한국과학기술원, 2002 |
32 | 온도와 충전재가 접착조인트 강도에 미치는 영향 = Effects of temperature and fillers on the adhesively bonded joint strengthlink 김진국; Kim, Jin-Kook; et al, 한국과학기술원, 1999 |
33 | 유리섬유 복합재료 샌드위치 구조의 접착 특성 향상에 대한 연구 = A study on the improvement of adhesive joining characteristics for glass fiber composite sandwich structureslink 이관호; Lee, Kwan-Ho; et al, 한국과학기술원, 2007 |
34 | 유한요소 역 해석을 이용한 축대칭 다단계 박판성형에서의 공정변수 설계에 관한 연구 = Design of process parameters in axisymmetric multi-step deep drawing by a finite element inverse methodlink 조천수; Cho, Cheon-Soo; 이대길; 허훈; et al, 한국과학기술원, 1997 |
35 | 자동차용 복합재료 범퍼 빔에 관한 연구 = A study on the composite bumper beam for passenger carslink 전성식; Cheon, Seong-Sik; et al, 한국과학기술원, 1995 |
36 | 자동차용 알루미늄/복합재료 하이브리드 동력전달축의 설계와 제작에 관한 연구 = A study on the design and manufacture of automotive aluminum/composite hybrid propeller shaftslink 김학성; Kim, Hak-Sung; et al, 한국과학기술원, 2003 |
37 | 전자기파 선택적 투과막을 이용한 스텔스 레이돔 설계에 관한 연구 = Design of stealth radomes using frequency selective surfaceslink 김포철; Kim, Po-Chul; et al, 한국과학기술원, 2007 |
38 | 접착제로 접합된 복합재료 구동축의 토오크 전달특성에 관한 연구 = A study on the torque transmission characteristics of adhesively bonded composite drive shaftslink 김원태; Kim, Won-Tae; et al, 한국과학기술원, 1993 |
39 | 접착조인트의 극저온 파괴인성 향상에 관한 연구 = A study on the improvement of fracture toughness of adhesive joints at cryogenic temperatureslink 윤순호; Yoon, Soon-Ho; et al, 한국과학기술원, 2009 |
40 | 축예하중이 알루미늄/복합재료 하이브리드의 샤프트의 비틀림 피로 특성에 미치는 영향 = Effects of axial preload on the torsional fatigue characteristics of aluminum/composite hybrid shaftslink 김종운; Kim, Jong- Woon; et al, 한국과학기술원, 2004 |
41 | 캠 기구의 동역학을 고려한 스프링 구동 캠의 형상설계 = Design of the spring-actuated cam profile considering cam-follower dynamicslink 김준형; Kim, Jun-Hyung; et al, 한국과학기술원, 1998 |
42 | 탄소 섬유 에폭시 복합재료 절단 연삭의 특성 연구 = A study on the cut-off grinding characteristics of the carbon fiber epoxy composite materialslink 김포진; Kim, Po-Jin; et al, 한국과학기술원, 1999 |
43 | 탄소/페놀 복합재료 저널 베어링의 개발 = Development of carbon/phenolic composite journal bearinglink 김성수; Kim, Seong-Su; et al, 한국과학기술원, 2004 |
44 | 틸팅축을 갖는 고속 머시닝센터의 주축부에 관한 연구 = A study on the spindle with a tilting axis for high speed machining centerslink 최진경; Choi, Jin-Kyung; et al, 한국과학기술원, 1995 |
45 | 하이브리드 강철/복합재료 원판형 절삭 공구에 관한 연구 = A study on the hybrid circular plate cutting tool composed of steel and composite structureslink 김병중; Kim, Byoung-Jung; et al, 한국과학기술원, 2006 |
46 | 흡습열이 접착 조인트의 강도에 미치는 영향 = Hygrothermal effects on the adhesively bonded joint strengthlink 권재욱; Kwon, Jae-Wook; et al, 한국과학기술원, 1998 |