1 | 3차원 음향 인텐시티를 이용한 음원 위치 추정 시 발생하는 편향오차 원인분석 및 보상법 = Analysis of bias errors and their compensation for the source localization using three-dimensional sound intensitylink 정인지; Jung, In-Jee; et al, 한국과학기술원, 2016 |
2 | (A) stable treatment of time domain boundary condition in using the finite difference time domain method = 유한 차분 시간영역법에 있어서 시간영역 경계조건의 안정적 사용link Sihar, Indra; Ih, Jeong-Guon; et al, 한국과학기술원, 2010 |
3 | (A) study on the acoustic black hole structure with varying width = 폭이 변하는 음향 블랙홀 구조에 대한 연구link Jeong, Jae-Hak; Ih, Jeong-Guon; et al, 한국과학기술원, 2019 |
4 | Beam-steering acoustic warning system of electric vehicles by using pipe-connected acoustic array = 관에 연결된 음향 어레이를 이용해 방사음 조향이 가능한 전기 자동차용 경고음 시스템link Aditanoyo, Teguh; Ih, Jeong-Guon; et al, 한국과학기술원, 2020 |
5 | Characteristics of sound propagation in the waveguide with periodic elements = 주기적 요소를 지닌 관로 내에서의 음향 전파 특성link Yim, Eun-Ok; 임은옥; et al, 한국과학기술원, 2012 |
6 | Compact acoustic array system using waveguides = 도파관을 이용한 소형 음향 어레이 시스템link Sebastian Lopez Mejia; Ih, Jeong-Guon; et al, 한국과학기술원, 2018 |
7 | Filtered-x LMS 알고리즘을 응용한 덕트내 전파 소음의 능동 제어 = Active noise control in a duct using filtered -x LMS algorithmlink 우재학; Woo, Jae-Hak; et al, 한국과학기술원, 1992 |
8 | Localization of incoherent sound sources by three-dimensional intensity array = 3차원 인텐시티 어레이를 이용한 비상관 다중음원의 위치추정link Franek, Filip; 필립 플라녜크; et al, 한국과학기술원, 2014 |
9 | Optimal design of the well-based sound diffusers = 동공형 음향 확산체의 최적 설계link Mondet, Boris Jean-Francois; 몽데, 보리스; Ih, Jeong-Guon; 이정권; et al, 한국과학기술원, 2016 |
10 | Optimization of acoustic blackhole structure for the reduction of plate vibration = 판의 진동에너지 저감을 위한 음향블랙홀 구조의 최적화link Kim, Mi-Seong; 김미성; Ih, Jeong-Guon; 이정권; et al, 한국과학기술원, 2016 |
11 | Psychoacoustic evaluation of warning sounds of electric vehicles in the viewpoint of detectability and annoyance = 인지성과 불쾌감 관점에서의 전기차 경고음의 심리음향적 평가link Gustav Nordahl, Jacobsen; 구스타브 노달, 야콥슨; et al, 한국과학기술원, 2016 |
12 | Vibration transmission through a junction connecting periodically stiffened thin plates = 주기적으로 강화된 얇은 판을 연결하는 접합부에의 진동 전파link Jeon, Jisu; Ih, Jeong-Guon; et al, 한국과학기술원, 2018 |
13 | 간접 경계요소법을 이용한 연결된 공간의 음향해석 = Analysis of acoustic coupling between connected cavities using indirect boun dary element methodlink 정지훈; Jeong, Ji-Hoon; et al, 한국과학기술원, 1996 |
14 | 경계 요소법을 이용한 3차원 능동 소음 제어의 최적화에 대한 연구 = A study on the optimal active noisecontrol for three-dimensional space by using BEMlink 권오상; Kwon, Oh-Sang; et al, 한국과학기술원, 1993 |
15 | 공기 청정기의 음질 평가 모델에 관한 연구 = A study on the sound quality evaluation model for an air cleanerlink 장수원; Jang, Su-Won; et al, 한국과학기술원, 2007 |
16 | 공동주택의 바닥에서 발생하는 중량 충격 소음의 예측 = Prediction of the heavy-weight floor impact noise in the multiple dwellingslink 박수호; Park, Su-Ho; et al, 한국과학기술원, 2009 |
17 | 국소 진동장 형성에 의한 얇은 평판에서의 촉감 구현 = Generation of localized vibration on a thin plate for haptic sensationlink 우정한; Woo, Jung-Han; et al, 한국과학기술원, 2014 |
18 | 근접장 음향부상에 관한 연구 = A study on the near-field acoustic levitationlink 고영갑; Ko, Young-Kap; et al, 한국과학기술원, 2003 |
19 | 노면과 타이어의 접촉부 충격력을 고려한 패턴 소음 예측에 관한 연구 = A study on the prediction of tire pattern noise considering the impact force at contact edgeslink 김은배; Kim, Eun-Bae; et al, 한국과학기술원, 2002 |
20 | 다공질형 흡/차음재료의 음향 물성치 측정 및 흡음율 예측 = Measurement of acoustic parameters and prediction of absorption coefficient of porous soundproofing materialslink 김정태; Kim, Jeong-Tae; et al, 한국과학기술원, 1997 |
21 | 덕트 내 단일 연결구를 갖는 소음원의 음향 특성 측정에 관한 연구 = On the measurement methods for one-port source characteristics in the duct systemlink 장승호; Jang, Seung-Ho; et al, 한국과학기술원, 1997 |
22 | 두 귀에 서로 다른 음이 입사되는 상태에서의 라우드니스 모델에 관한 연구 = A study on the loudness model in dichotic conditionslink 차정호; Cha, Jeong-Ho; et al, 한국과학기술원, 2003 |
23 | 디젤 매연여과기 내의 음향전파 해석에 관한 연구 = A study on the analysis of acoustic propagation in diesel particulate filterslink 최원용; Choi, Won-Yong; et al, 한국과학기술원, 2005 |
24 | 매미의 발음 기제를 모사한 음향 발생 장치의 설계에 관한 연구 = A study on the design of an acoustic actuatorlink 조완호; Cho, Wan-Ho; et al, 한국과학기술원, 2004 |
25 | 수정된 임계 대역을 이용한 디지털 보청기의 심리음향학적 맞춤에 관한 연구 = A study on the psychoacoustic fitting of digital hearing aids using the modified critical bandslink 박경훈; Park, Kyung-Hoon; et al, 한국과학기술원, 2004 |
26 | 스치는 유동이 존재하는 원형 천공요소의 음향 임피던스의 실험적 모델 = An empirical model for acoustic impedance of circular perforates in the presence of grazing flowlink 이성현; Lee, Seong-Hyun; et al, 한국과학기술원, 2001 |
27 | 스피커의 주관적인 평가와 객관적 측정 사이의 상관관계에 대한 연구 = A study on the correlation between subjective and objective data of loudspeakerslink 신성환; Shin, Sung-Hwan; et al, 한국과학기술원, 1999 |
28 | 시변성과 비선형성을 고려한 유체기계 음원 모델에 대한 연구 = A study on the acoustic source model considering time-varying and non-linear characteristics of fluid machinerylink 김태균; Kim, Tae-Kyoon; et al, 한국과학기술원, 2007 |
29 | 얇은 판에 수직으로 입사되는 자유 낙하 물방울에 의한 음향 방사 = Sound radiation from a thin plate by a normally impinging water drop in a free falllink 제병수; Je, Byoung-Soo; et al, 한국과학기술원, 2009 |
30 | 엔진 흡기계 공기 여과기의 음향 특성에 관한 연구 = A study on the acoustical characteristics of the air filter in engine intake systemslink 강장훈; Kang, Jang-Hoon; et al, 한국과학기술원, 2006 |
31 | 엔진 흡기계 소음원의 음향 변수 측정에 관한 연구 = A study on the measurement of acoustic parameters of the intake system of an internal combustion enginelink 조은수; Jo, Eun-Soo; et al, 한국과학기술원, 2005 |
32 | 역주파수응답행렬을 이용한 내부 공간의 구조 경계면상의 진동 및 음향원 규명 = Identification of vibro-acoustic sources on the boundary of enclosed spaces using the inverse frequency response matrixlink 전인열; Jeon, In-Youl; et al, 한국과학기술원, 1999 |
33 | 연성된 경계 요소법을 이용한 부분 차음판의 음향 특성 예측 = Prediction of acoustic characteristics of partial enclosures by using coupled BEMlink 배정용; Bae, Jeong-Yong; et al, 한국과학기술원, 1993 |
34 | 열음향 냉동기의 공명기에 관한 연구 = A study on the resonator of thermoacoustic refrigeratorslink 박철민; Park, Chul-Min; et al, 한국과학기술원, 1996 |
35 | 위상이 고려된 기하 음향 모델에 의한 내부음장 해석 = Acoustic analysis of interior spaces by using the phased geometric acoustic modellink 신호철; Shin, Ho-Chul; et al, 한국과학기술원, 1998 |
36 | 음선 추적에 의한 곡보의 고주파수 진동 해석에 관한 연구 = A study on the high frequency vibration analysis of curved beam structures by using the ray tracing methodlink 정철호; Jeong, Cheol-Ho; et al, 한국과학기술원, 2002 |
37 | 음성 명료도의 개선을 위한 실내 공간의 흡음 기준 = Design criterion of sound absorption in a room for enhancing the speech intelligibilitylink 고병윤; 이정권; et al, 한국과학기술원, 2021 |
38 | 음질을 고려한 소음원 파악에 관한 연구 = A study on the noise source identification considering the sound qualitylink 이승화; Yi, Seung-Hwa; et al, 한국과학기술원, 1998 |
39 | 음파를 이용한 덕트 내 불균일 단면적 측정에 관한 연구 = A study on the acoustical measurement method of sectional area in nonuniform ductslink 김회전; Kim, Hoi-Jeon; 박영진; 이정권; et al, 한국과학기술원, 2000 |
40 | 음향 계의 해석을 위한 시간영역 경계요소법에 관한 연구 = A study on the time domain boundary element method for the analysis of acoustical systemslink 장해원; Jang, Hae-Won; et al, 한국과학기술원, 2006 |
41 | 음향 문제의 해를 구하기 위한 유한 차분 시간 영역법의음원과 경계조건의 모델링에 관한 연구 = A study on the source and boundary modeling in the finite difference Time domain method for solving acoustic problemslink 고희연; Koh, Hee-yuen; et al, 한국과학기술원, 2008 |
42 | 음향의 충격 응답을 이용한 긴 관로 내의 누설의 위치 및 크기 추정 = Localization and size estimation of leaks in a long pipeline by using acoustic Impulse responselink 조용현; 이정권; et al, 한국과학기술원, 2018 |
43 | 음향학적 상반성원리를 이용한 밀폐된 공간 내의 음장예측 = The prediction of acoustic field in enclosed space using the acoustic reciprocity principlelink 김봉기; Kim, Bong-Ki; et al, 한국과학기술원, 1992 |
44 | 이중 모듈 인텐시티 어레이를 이용한 음원 위치 추정 = Acoustic source localization by using double-module intensity arraylink 조성규; Cho, Sung-Kyu; et al, 한국과학기술원, 2012 |
45 | 작은 흡음 계수를 가지는 음향재료의 정밀 측정에 관한 연구 = A study on the precision measurement of acoustic materials having small Absorption coefficientlink 신경철; Shin, Kyung-Chul; et al, 한국과학기술원, 2008 |
46 | 저주파수 배기소음 저감을 위한 차량 배기계의 최적화 = Optimization of the car exhaust system for the reduction of the low-frequency discharge noiselink 최충영; Choi, Choong-Young; et al, 한국과학기술원, 2009 |
47 | 제한된 2차원 공간에서 우퍼 영역의 스피커-혼 시스템의 형상 최적 설계 = Optimum shape deign of speaker-horn system for woofer range in a constrained 2-D spacelink 문사성; 이정권; et al, 한국과학기술원, 2021 |
48 | 주파수 영역에서 음파분리법에 의한 덕트소음의 능동소음제어 = Active noise control for a duct using wave decomposition technique in frequency domainlink 김재권; Kim, Jae-Kwon; et al, 한국과학기술원, 1994 |
49 | 지정된 주파수 들에서 효율의 최대화를 위한 직렬 배열 혼의 최적 설계 = Optimal design of serially connected horns for maximizing the efficiency at specified frequencieslink 허용호; Heo, Yong-Ho; et al, 한국과학기술원, 2010 |
50 | 직접 방사형 스피커의 비선형 고조파 왜곡에 관한 연구 = A study on the nonlinear harmonic distortion of direct-radiator loudspeakerslink 정혁; Chung, Hyuk; et al, 한국과학기술원, 1993 |
51 | 차량의 가속주행 소음 예측 및 소음원 기여도 파악에 관한 연구 = A study on the identification of noise sources and the prediction of pass-by noise of accelerating vehicleslink 류정수; Ryu, Jeong-Suh; et al, 한국과학기술원, 1997 |
52 | 충격음의 포스트마스킹 효과 = Post-masking effect of the impulsive soundslink 이기훈; Lee, Ki-Hun; et al, 한국과학기술원, 2011 |
53 | 타이어에 기인한 차실 내부 도로소음의 진동-음향계 모델링에 관한 연구 = A study on the vibro-acoustic modeling of road noise inside the vehicle originated from tirelink 조민철; Cho, Min-Chul; et al, 한국과학기술원, 2008 |
54 | 통계적 에너지 해석법에 의한 구조음향계의 입력 파워와 전달 경로 파악 = Identification of input power and transmission paths of vibro-acoustic systems by using statistical energy analysislink 채기상; Chae, Ki-Sang; et al, 한국과학기술원, 1994 |
55 | 평균 유동을 고려한 모세관 내의 음향 전파 해석 = Acoustic analysis of capillary ducts with mean flowlink 정강원; Jeong, Kang-Won; et al, 한국과학기술원, 1995 |
56 | 형상 보강판의 진동및 음향 특성에 관한 연구 = A study on the vibro-acoustic characteristics of swaged panelslink 이종화; Lee, Jong-Hwa; et al, 한국과학기술원, 1995 |
57 | 홀로그래피 방법으로 결정되는 다중 음원에 의한 목표 음장 형성 = Rendering of the desired sound field by source array determined in a holographic waylink 홍승완; Hong, Seung-Wan; et al, 한국과학기술원, 2013 |
58 | 회전하는 원환의 진동 감쇠를 위한 주기 구조의 파동 특성 연구 = (A) study on the wave characteristics of the periodic structures for the vibration attenuation in a rotating ringlink 김규범; 이정권; et al, 한국과학기술원, 2022 |