Browse "ME-Theses_Master(석사논문)" by Author Yoon, Yong-San

Showing results 41 to 70 of 70

41
엘리베이터 도어 기구의 동역학적 시뮬레이션에 관한 연구 = A study on dynamic simulation of elevator door machinelink

김지웅; Kim, Chi-Ung; et al, 한국과학기술원, 1998

42
여유 자유도를 가진 복강경 수술 로봇을 위한 조종기의 설계 = Design of a master system for laparoscopic surgery robot with redundant degree of freedomlink

김기영; Kim, Ki-Young; 윤용산; 이정주; et al, 한국과학기술원, 2005

43
완충고정술을 이용한 고관절 표면치환술에 관한 연구 = A study for hip resurfacing with buffered fixation methodlink

임경빈; Lim, Kyeong-Bin; et al, 한국과학기술원, 2007

44
완충고정술을 이용한 치아 임플란트의 설계에 관한 연구 = A study for dental implant design with buffered fixation methodlink

정재열; Jung, Jae-Yeol; et al, 한국과학기술원, 2010

45
운동화 평가를 위한 착지동작 시뮬레이터의 개발에 관한 연구 = A study for the development of a foot strike simulator for the running shoe evaluationlink

박해수; Park, Hae-Soo; et al, 한국과학기술원, 1989

46
운송모듈과 하역모듈로 이루어진 모바일하버의 설계에 대한 연구 = Study on the designof the mobile harbor comprised of transfer module and loading modulelink

김승우; Kim, Sueng-Woo; et al, 한국과학기술원, 2010

47
원추형 끼워맞춤된 인공고관절의 축대칭 접촉 응력 해석 = Axisymmetric contact analysis of an artificial hip joint of the conical fitting typelink

강영훈; Kang, Young-Hoon; et al, 한국과학기술원, 1987

48
유한 요소법을 이용한 매니퓰레이터의 동역학 해석 = Dynamic analysis of a manipulator using finite element methodlink

김태형; Kim, Tae-Hyoung; et al, 한국과학기술원, 1993

49
유한 요소법을 이용한 타이어 주행 상태 해석 = Running status analysis of tire using finite element methodlink

서장호; Seo, Jang-Ho; et al, 한국과학기술원, 1997

50
유한요소를 이용한 유연성 간극기구의 동적해석 = Dynamic analysis of flexible mechanisms with clearances using finite elementslink

길계환; Kil, Kae-Hwan; et al, 한국과학기술원, 1988

51
유한요소법을 이용한 안정 및 불안정 균열성장에 대한 연구 = A study on stable and unstable crack growth using finite element methodlink

이형연; Lee, Hyeong-Yeon; 엄윤용; 윤용산; et al, 한국과학기술원, 1986

52
유한요소법을 이용한 유연한 벨트구동계의 동적해석 = Dynamic analysis of flexible belt transmissions using finite element methodlink

류재욱; Ryou, Jae-Wook; et al, 한국과학기술원, 1992

53
응력 집중을 최소화한 인공관절스템의 형상설계 = Optimal design of metal stem of hip prosthesis to minimize the stress concentrationlink

장건희; Jang, Gun-Hee; et al, 한국과학기술원, 1986

54
이차원 사절기구의 간극들의 영향을 줄이기 위한 코일 스프링의 설계 = Design of the coil spring to reduce the influence of the clearances in the planar four bar mechanismlink

강동중; Kang, Dong-Joong; et al, 한국과학기술원, 1990

55
인공 고관절 전치환술에서 비구컵의 정확한 방향을 찾기 위한 CT 비사용 정합법에 대한 연구 = Study of a CT-free registration method for finding accurate orientation of acetabular-cup in total hip replacement surgerylink

고병훈; Ko, Byung-Hoon; et al, 한국과학기술원, 2003

56
인공 고관절계의 응력해석 및 개선 방안 연구 = Stress analysis of artificial hip joint and improvement studylink

황달연; Hwang, Dal-Yeun; et al, 한국과학기술원, 1985

57
인공고관절계의 3차원 응력해석 및 주대형상의 영향 = 3-D stress analysis of an artificial hip joint and the influence of the stem shapelink

장영순; Jang, Young-Soon; 윤용산; 김영룡; et al, 한국과학기술원, 1987

58
인체운동해석의 정밀도 개선을 위한 연구 = Study on the data reduction technique for the human motion analysislink

김기갑; Kim, Ki-Kap; et al, 한국과학기술원, 1986

59
임팩트순간 클럽샤프트의 변형에 따른 골프 드라이버 샷의 평가 = The evaluation of golf driver shot based on the deflection of club shaft at impactlink

박종민; Park, Jong-Min; et al, 한국과학기술원, 2003

60
정상걸음새를 갖는 의족의 설계에 관한 연구 = Study for design of above-knee prosthesis to get normal gaitlink

강신길; Kang, Sheen-Gil; et al, 한국과학기술원, 1996

61
지식 기반 시스템을 이용한 플라이 휘일의 설계 보조 소프트웨어 개발에 관한 연구 = A study for the development of flywheel design aid software using knowledge based systemlink

김혁; Kim, Hyuk; et al, 한국과학기술원, 1990

62
지식처리 시스템을 이용한 평면 4절 링크기구의 개념 설계및 상세 설계에 관한 연구 = A study for conceptual and detailed design of planar 4-bar linkage mechanism using knowledge-based systemlink

이성배; Lee, Sung-Bae; et al, 한국과학기술원, 1988

63
지식처리 시스템을 이용한 평면 4절링크기구의 원형설계를 위한 연구 = A study for prototype design of planar 4-bar linkage mechanism using knowledge based systemlink

이황진; Lee, Hwang-Jin; et al, 한국과학기술원, 1987

64
최소 침습 인공 고관절 수술 로봇 개발에 관한 연구 = Study on a development of MIS robot for THAlink

박석훈; Park, Suk-Hoon; et al, 한국과학기술원, 2004

65
최소동력을 요하는 4각 보행로보트의 다리기구 설계 = Design of the leg mechanism of four-legged walking robot with minimum power requirementlink

김진연; Kim, Jin-Yeon; et al, 한국과학기술원, 1988

66
클러치가 없는 스마트 기어변속기 하이브리드 시스템의 제어 알고리즘 및 다물체 동역학 해석 = Multibody dynamic analysis and control algorithm for hybrid system with clutchless geared smart transmission(CGST)link

백승흠; Baek, Seung-Heum; et al, 한국과학기술원, 2012

67
클러치가 없는 차량용 스마트 기어 변속기의 구조 및 Test Bench 설계 = Design of the test bench system and structure for clutchless geared smart transmission(CGST)link

이상훈; Lee, Sang-Hun; et al, 한국과학기술원, 2012

68
타이어 수직 하중 측정을 이용한 타이어-지면 간 마찰 계수 예측에 관한 연구 = Estimation of tire-road friction coefficient using tire vertical load measurementlink

송원종; Song, Won-Jong; et al, 한국과학기술원, 2013

69
타이어의 회전변형이 ABS에 미치는 영향 = Effect of rotational deformation of tire on antilock brake systemlink

박준모; Park, Joon-Mo; et al, 한국과학기술원, 1997

70
화상에 의한 삼차원 인체운동 자료의 정밀도 개선을 위한 연구 = Study for improvement of three dimensional human motion data from imageslink

조기대; Cho, Ki-Dae; et al, 한국과학기술원, 1991

rss_1.0 rss_2.0 atom_1.0