Browse "ME-Theses_Master(석사논문)" by Title 

Showing results 2741 to 2760 of 3969

2741
연 X-선을 이용한 submicron 입자의 광하전 특성 및 그 응용 = Study on the characteristics of photoelectrical charging of submicron particles using soft X-ray and its applicationlink

한선우; Han, Sun-Woo; et al, 한국과학기술원, 2012

2742
연료 소비량을 최소화 하기 위한 엔진의 suboptimal control = Suboptimal control of engine for minimizing fuel consumptionlink

박형호; Park, Hyung-Ho; et al, 한국과학기술원, 1981

2743
연료전지 적용을 위한 수증기 개질기의 수치해석 연구 = Numerical investigation of steam reformer for fuel cellslink

박준근; Park, Joon-Guen; et al, 한국과학기술원, 2007

2744
연료전지와 납축전지를 이용한 외부충전방식 하이브리드 자동차의 운전전략에 관한 연구 = Study on operating strategies for fuel cell and lead-acid battery plug-in type hybrid vehiclelink

정재화; Jeong, Jae-hwa; et al, 한국과학기술원, 2008

2745
연료전지의 성능에 대한 맥동유동의 영향 = Effects of pulsating flow on the performance of PEM fuel celllink

장정봉; Chang, Cheong-Bong; et al, 한국과학기술원, 2009

2746
연삭 가공면의 표면조도와 형상정밀도의 비접촉식 인프로세스 측정기술 개발 = An in-process measurement technique for non-contact monitering of surface roughness and form accuracy of ground surfaceslink

임동열; Yim, Dong-Yeol; et al, 한국과학기술원, 1987

2747
연성 재료의 안정 균열 성장에 대한 연구 = A study on stable crack growth in ductile materiallink

문대흥; Moon, Dae-Heung; et al, 한국과학기술원, 1984

2748
연성된 경계 요소법을 이용한 부분 차음판의 음향 특성 예측 = Prediction of acoustic characteristics of partial enclosures by using coupled BEMlink

배정용; Bae, Jeong-Yong; et al, 한국과학기술원, 1993

2749
연성물질의 파괴 저항 곡선에 관한 연구 = A study on J-resistance curve for ductile materiallink

최영환; Choi, Young-Hwan; et al, 한국과학기술원, 1984

2750
연소 가스와 공기의 2차원 혼합층에서 난류혼합특성에 관한 실험적 연구 = An experimental study on the turbulent mixing characteristics in 2-dimensional mixing layer between burned gas and airlink

김흥덕; Kim, Heung-Duk; et al, 한국과학기술원, 1983

2751
연소 가스와 공기의 이차원 난류혼합경계층 내에서의 온도변동 특성에 관한 실험적 연구 = An experimental study on temperature fluctuation characteristics in two-dimensional turbulent mixing layer between burned gas and airlink

유영환; You, Young-Hwan; et al, 한국과학기술원, 1982

2752
연소 및 고체 화학 반응을 고려한 고체고온공정 모형 및 응용 = Analysis model and application of the solid pyro-process considering flame combustion and solid chemical reactionlink

최동환; 최상민; et al, 한국과학기술원, 2017

2753
연소가스속 증기의 응축이 부착율에 미치는 영향에 관한 실험적 연구 = An experimental study on vapor deposition rates in the presence of homogeneous condensation in combustion gaseslink

정해영; Jeong, Hai-Yeong; et al, 한국과학기술원, 1988

2754
연소중 미분탄에 대한 분광학적 연구 = Spectroscopic investigation of burning pulverized coal particleslink

황원호; Hwang, Won-Ho; et al, 한국과학기술원, 1992

2755
연속 레이저 흡수에 의한 증발제거 과정의 관련 인자 영향 고찰 = Effect of parameters in evaporative removal process by absorption of a CW laserlink

김진윤; Kim, Jin-Yoon; et al, 한국과학기술원, 1994

2756
연속 용융 아연도금 공정에서의 단부 과도금 현상에 대한 수치해석 = Numerical analysis of edge overcoating in continuous Hot-Dip galvanizinglink

안기장; Ahn, Gi-Jang; et al, 한국과학기술원, 2002

2757
연속 하이브리드 공정을 이용한 알루미늄 고강도 볼트 성형 = High strength bolt forming of fine grained aluminum alloylink

김지훈; Kim, Ji-Hun; et al, 한국과학기술원, 2012

2758
연속체 수정법에 의한 S.D.M. 신뢰성 개선에 대한 연구 = A study on improving S.D.M. results by introducing continuous modification techniquelink

양군호; Yang, Koon-Ho; et al, 한국과학기술원, 1987

2759
연주자를 위한 스테이지 인크로우져의 최적 설계 = Optimal design of stage enclosure for performerslink

이희원; Lee, Hee-Won; et al, 한국과학기술원, 1981

2760
연탄을 사용하는 온풍로에서의 열전달에 관한 연구 = A study on the heat transfer characteristics of a warm-air-furnace firing briquettelink

김재헌; Kim, Jae-Hun; et al, 한국과학기술원, 1977

rss_1.0 rss_2.0 atom_1.0