Browse "ME-Theses_Master(석사논문)" by Title 

Showing results 1421 to 1440 of 3903

1421
공동주택의 바닥에서 발생하는 중량 충격 소음의 예측 = Prediction of the heavy-weight floor impact noise in the multiple dwellingslink

박수호; Park, Su-Ho; et al, 한국과학기술원, 2009

1422
공리 설계를 이용한 모바일 로봇 도킹 스테이션의 개발 = Development of docking station for mobile robot using axiomatic designlink

이경운; Lee, Kyung-Woon; et al, 한국과학기술원, 2006

1423
공명기 배열을 이용한 저주파 소음저감용 소음기의 설계 = Low frequency silencer design by using array resonatorslink

서상현; Seo, Sang-Hyun; et al, 한국과학기술원, 2004

1424
공벌레를 생체 모방한 정찰 로봇 = Reconnaissance robot inspired by pill bugslink

박종원; Park, Jong-Won; et al, 한국과학기술원, 2011

1425
공압 3축 매니퓰레이터의 위치제어에 관한 연구 = A study on the position control of a pneumatic SCARA manipulatorlink

전용원; Jeon, Yong-Won; et al, 한국과학기술원, 1994

1426
공압-모터 하이브리드 로봇의 이족보행을 위한 힘제어 알고리즘 개발 = Development of force control algorithm for pneumatic-motor hybrid biped robotlink

강정욱; 김경수; et al, 한국과학기술원, 2020

1427
공압구동 Gripper의 성능 향상에 관한 연구 = A study on the performance enhancement of pneumatic gripperlink

최연석; Choi, Yon-Sok; et al, 한국과학기술원, 1992

1428
공압구동기반 1족 로봇의 착지 충격력 감소 기법 = (A) method for reducing landing impact force of pneumatically actuated one-legged robotlink

김동현; 김경수; Kim, Kyung-Soo; 김수현; et al, 한국과학기술원, 2018

1429
공압구동기의 성능에 관한 연구 = A study on performance of pneumatic actuatorlink

박영우; Park, Young-Woo; et al, 한국과학기술원, 2013

1430
공액구배법의 성능향상을 위한 전조정기법과 번호부여방법에 관한 연구 = A study on preconditioning techniques and numbering methods for improving the performance of PCG'slink

송진원; Song, Jin-Won; et al, 한국과학기술원, 2002

1431
공작기계 Chatter 제어 시스템에 대한 비례-적분-미분 제어 법칙의 적용 = Application of PID control law to design of a machine tool chatter control systemlink

이제원; Lee, Jeh-Weon; et al, 한국과학기술원, 1981

1432
공작기계 구동시스템 최적설계에 관한 연구 = A study on optimal design of NC machine tool servo systemlink

박종승; Park, Jong-Seung; et al, 한국과학기술원, 1988

1433
공작기계 구동오차의 능동적 상호보상에 관한 연구 = A study on active mutual software compensation for linear motion errors of machine toolslink

송석한; Song, Suk-Han; et al, 한국과학기술원, 1989

1434
공작기계 양센타간 자동 편차보정 시스템 개발 = Development of an automatic compensation system for errors between two centerslink

박진호; Park, Jin-Ho; et al, 한국과학기술원, 1996

1435
공작기계 이송기구의 진동이 절삭에 미치는 영향 = Dynamic characteristics of machine tool feed-drive system and its effects on cuttinglink

조영호; Cho, Young-Ho; et al, 한국과학기술원, 1982

1436
공작기계 직선 베어링 안내면의 정도 설계에 관한 연구 = The accuracy design of LM guide system in machine toolslink

김경호; Kim, Kyung-Ho; 김승우; 이후상; et al, 한국과학기술원, 2000

1437
공작기계 평안내면의 마찰 특성 측정에 관한 연구 = A study on frictional characteristics of the plain type guidewaylink

이승만; Lee, Seung-Man; et al, 한국과학기술원, 1989

1438
공작기계용 기어박스의 소음/진동 해석 = Noise/vibration analysis of gearbox for machine toolslink

김광욱; Kim, Kwang-Wook; et al, 한국과학기술원, 1999

1439
공작기계의 고속 이송시의 동적 운동 정도에 관한 연구 = A study on the dyamic motion accuracy of machine tool in high feedratelink

오정후; Oh, Jung-Who; et al, 한국과학기술원, 1997

1440
공작기계의 채터 강성 평가에 관한 연구 = A study on chatter stability evaluation of machine toolslink

정낙신; Jung, Nak-Shin; et al, 한국과학기술원, 2009

rss_1.0 rss_2.0 atom_1.0