Browse "ME-Theses_Master(석사논문)" by Title 

Showing results 3761 to 3780 of 3887

3761
하이브리드 트레프츠 평판 요소의 변분 수식화와 성능 평가 = Variational formulation of hybrid-trefftz plate elements and evaluation of their static performancelink

추연석; Choo, Yeon-Seok; et al, 한국과학기술원, 2002

3762
하이브리드 형 외골격 로봇과 사용자의 무릎 관절과의 상호관계에 의한 제어의 연구 = A study of control by interaction relationship between knee joint of user and hybrid type exoskeleton robotlink

강성현; Kang, Seong-Hyeon; et al, 한국과학기술원, 2013

3763
하이브리드 형태의 이동로봇(KaMERo)을 이용한 표현적인 몸체의 움직임 구현 = Realization of expressive body motions using three leg-wheels hybrid mobile robot: KaMERolink

육남수; Yuk, Nam-Su; et al, 한국과학기술원, 2008

3764
하이퍼볼릭 메타물질을 이용한 나노리소그래피 = Nanolithography using hyperbolic metamaterialslink

조용래; Cho, Yong-Rae; et al, 한국과학기술원, 2014

3765
하이포이드 기어의 기하학적 해석과 설계 = Geometrical analysis and dimensional design of hypoid gearslink

한근조; Han, Geun-Jo; et al, 한국과학기술원, 1981

3766
하이포이드 기어의 진동 분석 = The hypoid gear vibration analysislink

김영배; Kim, Young-Bae; et al, 한국과학기술원, 1982

3767
하중이력 데이타베이스 및 균열닫힘현상을 고려한 피로균열진전 해석 전문가시스템 프로토타입의 구축 = Development of a load history database and an expert system prototype for the analysis of fatigue crack growth based on the concept of crack closurelink

임형진; Lim, Hyung-Jin; et al, 한국과학기술원, 1997

3768
하체 외골격로봇의 시변 저크 필터 연구 = A study on the time varying jerk filter of lower limb exoskeletonlink

이강규; Lee, Kang Kyu; et al, 한국과학기술원, 2015

3769
한 평판 후류에 놓인, 自轉하는 제2평판 익형의 공기역학적 특성 = Aerodynamics of a flat-plate wing autorotating in the wake of another identical wing in the upstreamlink

이재근; Lee, Jae-Keun; et al, 한국과학기술원, 1983

3770
할바흐 자석 배열과 보이스 코일 모터를 이용한 6 자유도 능동 제진대의 설계 및 제어 = Design and control of a six degree of freedom active vibration isolator using voice coil motor with halbach magnet arraylink

김명현; Kim, Myeong-Hyeon; et al, 한국과학기술원, 2012

3771
함유 베어링의 성능 시험기 설계와 실험 = Design of a porous metal bearing tester and the performance testlink

유형선; Yu, Hyeong-Seon; et al, 한국과학기술원, 1976

3772
합성신호의 위상차를 이용한 근접 센서에 관한 연구 = A study on the optical proximity sensor using phase information by the synthesized signallink

박경독; Park, Kyeong-Dok; 이종원; 조형석; et al, 한국과학기술원, 1986

3773
항공기 구조용 AISI 4340 강의 피로균열진전에 관한 기초 연구 = A preliminary study on fatigue crack growth of AISI 4340 steel for aircraft structure componentslink

이영수; Lee, Young-Soo; et al, 한국과학기술원, 2006

3774
항공기 브레이크용 탄소/탄소 복합재료의 마찰 및 마모에 대한 연구 = A study on friction and wear of carbon/carbon composites for aircraft brake applicationlink

우성택; Woo, Seong-Teg; et al, 한국과학기술원, 1993

3775
해수담수화와 지역난방 및 전력 생산을 고려한 세 가지 목적의 발전소 설계 및 열성능 분석 = Design and performance analysis of triple purpose power plant for seawater desalination, district heating and power generationlink

김득원; 최상민; et al, 한국과학기술원, 2017

3776
해저 시추를 위한 RISER 의 동력학적 연구 = Dynamic analysis of marine drilling riserlink

한남수; Han, Nam-Soo; et al, 한국과학기술원, 1984

3777
핵 연료봉의 안전을 위한 동력로의 출력 제한 = Limitations on the power of a nuclear reactor for the safety of fuel rodslink

황일순; Hwang, Il-Soon; et al, 한국과학기술원, 1977

3778
핵연료 집합체 지지격자의 좌굴거동에 대한 비선형 유한요소해석 = Finite element analysis of nonlinear buckling behavior of spacer grids in nuclear fuel assemblylink

최강혁; Choi, Kang-Hyouk; et al, 한국과학기술원, 2000

3779
핵연료의 기공 및 소결체-피복관 접촉면의 열적 성능 해석 = Thermal performance analysis of fuel porosity and pellet clad interfacelink

주영철; Joo, Young-Cheol; et al, 한국과학기술원, 1986

3780
행렬법을 이용한 환상압연의 슬립라인 해석 = A slip line analysis of the ring rolling process using a matrix methodlink

정완진; Jung, Wan-Jin; et al, 한국과학기술원, 1985

rss_1.0 rss_2.0 atom_1.0