Browse "ME-Theses_Master(석사논문)" by Title 

Showing results 3701 to 3720 of 3882

3701
풍차용프로펠러 및 핏치조정장치에 관한 연구 = Study on the propeller and its pitch control systemlink

이세창; Lee, Sei-Chang; et al, 한국과학기술원, 1975

3702
풍차자동핏치조정기구의 동역학적 해석 = A dynamic analysis of feathering device of a wind generatorlink

김상환; Kim, Sang-Hwan; et al, 한국과학기술원, 1978

3703
풍차프로멜러에 대한 응력해석 = Stress analysis of a windmill propellerlink

안택순; Ahn, Taek-Soon; et al, 한국과학기술원, 1976

3704
프라스틱 사출기의 사출공정의 최적제어 = Optimal feedback control of mold filling process for injection molding machinelink

임승철; Lim, Seung-Chul; et al, 한국과학기술원, 1983

3705
프라즈마 아아크 절단에서 절단폭의 해석및 자동화에 관한 연구 = A study on the determination of the kerf width and the automation for the plasma arc cutting processlink

노태정; Lho, Tae-Jeong; et al, 한국과학기술원, 1986

3706
프레임구조 차량의 주행 진동 개선을 위한 프레임 부시 최적화에 관한 연구 = A study on optimization of frame bush for ride comfort improvement of body-on-frame vehicleslink

정면규; Jeong, Myeon-Gyu; et al, 한국과학기술원, 2006

3707
프로판-공기 난류 분류 확산 화염에서 매연 생성에 관한 연구 = A study on the soot formation in the propane-air turbulent jet diffusion flamelink

최항준; Choi, Hang-June; et al, 한국과학기술원, 1983

3708
프리즘을 이용한 음향광학변조필터의 이미지 이동 보상에 관한 연구 = Design of a prism to compensate the image-shifting error of the acousto-optic tunable filterlink

류성윤; Ryu, Sung-Yoon; et al, 한국과학기술원, 2008

3709
프린팅 공정을 이용한 가스센서 제작 = Production of gas sensor using printing technologylink

전강민; Jeon, Kang-Min; et al, 한국과학기술원, 2007

3710
플라스틱 병의 머리부분 결함검출을 위한 실시간 비젼시스템에 관한 연구 = A study on a real time vision system for inspecting the seal surface on PET bottleslink

박철훈; Park, Chul-Hoon; et al, 한국과학기술원, 1995

3711
플라스틱 사출성형기의 시스템 특성 연구 = Parameter identification of the mold filling process in an injection molding machinelink

권오익; Kwoun, Oh-Ig; 조형석; 이종원; et al, 한국과학기술원, 1985

3712
플라즈마 디스플레이 패널용 격벽의 초정밀 제작에 관한 연구 = A study on ultra-precision fabrication of barrier rib for plasma display panel using a roll-forming processlink

류승민; Ryu, Seung-Min; et al, 한국과학기술원, 2005

3713
플라즈마 절단시 유출플라즈마 에너지를 이용한 절단품질 개선에 관한 연구 = A study on the improvement of cut quality by using ejected plasma energy in plasma arc cuttinglink

윤기명; Yun, Kee-Myeong; et al, 한국과학기술원, 1988

3714
플라즈마 키홀 박판 용접에서의 열 및 물질유동에 관한 연구 = A study on the heat and mass flow in plasma arc keyhole-welding of thin plateslink

김원훈; Kim, Wun-Hoon; et al, 한국과학기술원, 1987

3715
플라즈모닉 나노유체를 이용한 체적 기반 태양열 집열기 성능에 대한 나노입자의 산란 효과 분석 = Effect of scattering by nanoparticle suspensions on performance of direct absorption solar collector using plasmonic nanofluidlink

원광현; 이봉재; et al, 한국과학기술원, 2017

3716
플래퍼-노즐 밸브를 이용한 전기 비례 릴리이프 밸브의 정적 해석 = Static characteristics of electro-magnetic relief valve using flapper-nozzle valvelink

김영국; Kim, Young-Guk; 양동열; 조형석; et al, 한국과학기술원, 1986

3717
플런지 연삭 공정중 공작물형상의 인프로세스 측정 및 적응제어에 관한 연구 = In-process measurement and adaptive control of workpiece profile in the plunge grinding processlink

이형석; Lee, Hyung-Seok; et al, 한국과학기술원, 1990

3718
플레인징 공정의 성형한계에 대한 이론 및 실험적 연구 = A theoretical and experimental study on forming limits in the flanging processeslink

박승교; Park, Seung-Kyo; et al, 한국과학기술원, 1985

3719
플립칩 솔더링의 자기 정렬 효과에 관한 연구 = A study on self-aligning effect of flip-chip solderinglink

안도현; Ahn, Do-Hyun; et al, 한국과학기술원, 2003

3720
플립칩의 위치 정렬을 위한 듀얼광학계 구성 및 비주얼 서보잉 연구 = Configuration of dual imaging system and study of visual servoing method for flip-chip alignmentlink

이달재; Lee, Dal-Jae; et al, 한국과학기술원, 2006

rss_1.0 rss_2.0 atom_1.0