Browse "ME-Theses_Master(석사논문)" by Title 

Showing results 61 to 80 of 3882

61
3차원 난류 벽면제트 유동의 수치해석 = Numerical analysis of a 3-dimensional turbulent wall-jet flowlink

유승엽; Ryu, Seung-Yeob; et al, 한국과학기술원, 2000

62
3차원 납 접합부 형상을 이용한 표면 실장 기술의 설계 기준 결정에 관한 연구 = Determination of design criteria using 3D solder joint configuration in SMTlink

김성관; Kim, Sung-Gaun; et al, 한국과학기술원, 1995

63
3차원 단조공정에서의 예비형상 설계에 관한 연구 = A study on the preform design in 3-D forginglink

신현기; Shin, Hyun-Ki; et al, 한국과학기술원, 2002

64
3차원 유한요소 모델 표면에 대한 응력선도 프로그램 개발 = Development of a stress contour display program for surface of three-dimensional finite element models with curved brick and plate elementlink

박재건; Park, Jae-Keon; et al, 한국과학기술원, 1986

65
3차원 유한요소 모델을 이용한 핵연료-피복관 기계적 상호작용 해석 = 3D Finite element analysis of pellet to cladding mechanical interactionlink

서상규; Seo, Sang kyu; et al, 한국과학기술원, 2015

66
3차원 유한요소법을 이용한 등속조인트 고무 부트의 자체접촉해석 = Self contact analysis of rubber-boots for C. V. joints by a 3-D finite element methodlink

이형욱; Lee, Hyoung-Wook; et al, 한국과학기술원, 1997

67
3차원 유한체적법을 이용한 anode 지지체 평관형 고체 산화물 연료전지의 성능해석 = Three-dimensional finite volume analysis for the anode-supported flat-tubular solid oxide fuel cell performancelink

장인우; Jang, In-Woo; et al, 한국과학기술원, 2012

68
3차원 음향 인텐시티를 이용한 음원 위치 추정 시 발생하는 편향오차 원인분석 및 보상법 = Analysis of bias errors and their compensation for the source localization using three-dimensional sound intensitylink

정인지; Jung, In-Jee; et al, 한국과학기술원, 2016

69
3차원 적외선 카메라를 이용한 자율 속도 보행 및 가상현실 기반 곡선 보행 트레드밀 훈련 시스템의 개발 = Development of a self-paced and VR-based turning treadmill system for gait rehabilitation using RGB-D cameralink

김용경; Kim, Yong-Kyoung; et al, 한국과학기술원, 2016

70
3차원 탄성 경계 적분 방정식의 정규화에 관한 연구 = A study on regularization of boundary integral equations for three dimensional elasticity problemslink

김선원; Kim, Sun-Won; 이병채; 허훈; et al, 한국과학기술원, 1999

71
3차원 표면의 컬러 인쇄를 위한 공정 변수 영향 분석에 관한 연구 = Influence of process parameters on three-dimensional surface coloringlink

송민섭; Song, Min-Sup; et al, 한국과학기술원, 2005

72
3차원 형재의 후방 압출 해석 = Analysis of backward extrusion for three-dimensional shapeslink

한철호; Han, Chul-Ho; et al, 한국과학기술원, 1980

73
3축 브레이딩 제작 조건에 따른 패턴 및 기계적 특성에 관한 연구 = Effects of triaxial braiding manufacturing conditions on patterns and mechanical propertieslink

김원기; 김성수; et al, 한국과학기술원, 2023

74
3축 하드웨어 보간기를 이용한 관절형 로봇의 직교 경로 제어에 관한 연구 = A cartesian path control of articulated robots using 3-axis hardware interpolatorlink

백승훈; Baek, Seung-Hun; et al, 한국과학기술원, 1991

75
429EM 스테인리스 강의 열적 기계적 피로 특성에 관한 실험적 연구 = An experimental study on thermo-mechanical fatigue life of 429EM stainless steellink

이금오; Lee, Keum-Oh; et al, 한국과학기술원, 2003

76
4각 보행로보트의 제작 및 균형추를 이용한 안정성 향상에 관한 연구 = A development of 4-legged walking machine and the enhancement of static stability margin using balancing weightlink

강신천; Kang, Sin-Cheon; et al, 한국과학기술원, 1991

77
4관절 3링크 2족 로봇과 걸음새에 관한 연구 = A study on 4 joints 3 links biped robot and its gaitslink

김성훈; Kim, Sung-Hoon; et al, 한국과학기술원, 2000

78
4자유도 모션 플랫폼을 이용한 잠수함의 운동감 재현과 잠망경 시뮬레이션의 스테레오 다채널 가시화 = Simulation of periscope based on 4-dof motion platform and stereoscopic multi-channel visualizationlink

Zhenshun Xu; Xu, Zhenshun; et al, 한국과학기술원, 2012

79
4절 링크 기구의 조직적 설계 및 해석 프로그램 개발에 관한 연구 = A study for the development of systematic design and analysis program of a four bar linkagelink

이학수; Lee, Hak-Soo; et al, 한국과학기술원, 1989

80
4족 보행 로봇의 안정적 걸음새 변환 패턴 생성에 관한 연구 = (A) Study on the Stable Gait Transition Pattern Generation of Quadruped Robotlink

홍승우; 오준호; et al, 한국과학기술원, 2017

rss_1.0 rss_2.0 atom_1.0