Browse "ME-Theses_Master(석사논문)" by Title 

Showing results 3441 to 3460 of 3882

3441
최소분리영역 기준에 근거한 원뿔의 기하학적 형상 오차 평가 = Geometric form evaluation of cone based on the minimum zone criterialink

김형민; Kim, Hyung-Min; et al, 한국과학기술원, 1997

3442
최소자승법을 이용한 그래프 데이타 모델링 프로그램의 개발 = Development of a computer program for automatic modeling of graph data by the least square methodlink

이준배; Lee, Jun-Bae; et al, 한국과학기술원, 1991

3443
최소자승유한요소법을 이용한 유체-구조 연계해석에 관한 연구 = A study on the fluid-structure interaction using LSFEMlink

이성호; Lee, Sung-Ho; et al, 한국과학기술원, 2000

3444
최소침습 수술도구의 힘 측정용 소형 힘 센서 = Miniaturized force transducer for minimum invasive surgical instrumentlink

황민호; Hwang, Min-Ho; et al, 한국과학기술원, 2012

3445
최적가중함수를 이용한 대류항이 큰 전달방정식의 Upwind 유한요소해석 = A study on an upwind finite element method using optimal weighting function for solving transport equations with large convection termlink

민준기; Min, June-Kee; 정명균; 권장혁; et al, 한국과학기술원, 1990

3446
최적응답특성을 갖는 부하적응유압속도 제어기 설계에 관한 연구 = A study on the design of load adaptive hydraulic velocity controller with the optimal responselink

범희락; Beom, Hee-Rak; 조형석; 양동열; et al, 한국과학기술원, 1985

3447
최적화 기반 통계적 모델 보정을 위한 크리깅 모델의 효율적인 순차적 샘플링 기법 = (An) efficient sequential sampling method of kriging surrogate model for optimization-based statistical model calibrationlink

조휘상; 이익진; et al, 한국과학기술원, 2019

3448
최적화 기법을 사용한 선체곡면의 정형 = Surface fairing of ship hull form by optimization techniquelink

정동관; Jeong, Dong-Gwan; et al, 한국과학기술원, 1986

3449
최적화 기법을 이용한 매니퓨레이터 조인트 마찰력 규명 및 실험적 검증 = Manipulator joint friction identification using optimization technique and its experimental verificationlink

김경호; Kim, Gyeong-Ho; et al, 한국과학기술원, 1998

3450
추가 변형률 요소를 이용한 열 응력 해석에 관한 연구 = A study on thermal stress analysis using enhanced assumed strain elementslink

고진환; Ko, Jin-Hwan; et al, 한국과학기술원, 1997

3451
추가 절점자유도를 가지는 Cosserat 연속체역학 기반 평면 사각요소 개발 = Development of cosserat plane quadrilateral elements with addtional degrees of freedomlink

이동기; Lee, Dong-Gi; et al, 한국과학기술원, 2014

3452
추적식 3차원 형상 측정을 위한 광학식 변위센서 = A study on the optical displacement sensor for a three dimensional surface profile measurement by a tracking methodlink

이재윤; Lee, Jae-Yun; et al, 한국과학기술원, 1991

3453
축 대칭 Hydroforming 공정에 의한 유한 요소 해석 = Finite element analysis of the axisymmetric hydroforming processlink

최선준; Choi, Sun-Jun; et al, 한국과학기술원, 1984

3454
축 대칭 복합 압출에 관한 상계해 = An upper bound analysis of the axisymmetric combined extrusionlink

김용환; Kim, Yong-Hwan; et al, 한국과학기술원, 1981

3455
축 방향 유동 유체 내에서 봉집합체의 진동 현상 = Vibration of rod bundles in axial channel flowlink

정경훈; Jeong, Kyeong-Hoon; et al, 한국과학기술원, 1985

3456
축 방향을 따라 지름이 정현 곡선으로 변하는 굴곡 관 내의 유동과 열전달 특성에 관한 연구 = Flow and thermal analysis for corrugated tubes with sinusoidal axial variations in diameterlink

유담; Yoo, Dahm; et al, 한국과학기술원, 2015

3457
축대칭 hydroforming 공정의 상계해석 = An upper-bound analysis of the axisymmetric hydroforming processlink

박영현; Park, Young-Hyun; et al, 한국과학기술원, 1986

3458
축대칭 공동(空洞)내의 동축 제트 혼합에 대한 연구 = Experimental study on the mixing of the coaxial jets in an axisymmetric cavitylink

김인철; Kim, In-Cheol; et al, 한국과학기술원, 1990

3459
축대칭 난류 제트 확산 화염의 특성 예측에 관한 연구 = A study on the prediction of the properties of a axi-symmetrical turbulent jet diffusion flamelink

김이환; Kim, Iee-Hwan; et al, 한국과학기술원, 1982

3460
축대칭 및 평면 변형 단조의 열-점소성 유한 요소 해석 = Thermo-viscoplastic finite element analysis of axisymmetric and plane strain forginglink

천명식; Cheon, Myeong-Sig; et al, 한국과학기술원, 1988

rss_1.0 rss_2.0 atom_1.0