Browse "AE-Theses_Ph.D.(박사논문)" by Title 

Showing results 578 to 597 of 605

578
타원 익형 공력 및 유동장 특성에 대한 실험적 연구 = Experimental study on aerodynamic and flow field characteristics of elliptic airfoilslink

권기정; Kwon, Ki-Jung; et al, 한국과학기술원, 2006

579
탄성 변형 효과를 고려한 전진 비행하는 헬리콥터 로터 블레이드 공기역학 해석 = Aerodynamic analysis of helicopter rotor blades in forward flight considering elastic deflection effectslink

남화진; Nam, Hwa-Jin; et al, 한국과학기술원, 2008

580
탄소섬유강화 복합재료의 혼합모우드 층간파괴특성에 관한 연구 = Characterization of interlaminar fracture in graphite/epoxy composite under mixed-mode deformationslink

윤성호; Yoon, Sung-Ho; et al, 한국과학기술원, 1990

581
터보 냉각 사이클의 고도 모사를 위한 지상 시험 = Ground simulation of altitude test of turbo-refrigeration cyclelink

백승윤; Paek, Seung-Yun; et al, 한국과학기술원, 2017

582
파형벽면에 관한 압축성 난류 Navier-stokes 유동의 해석 = Numerical analysis of compressible turbulent navier-stokes flow over a wavy walllink

박정주; Park, Jeong-Joo; et al, 한국과학기술원, 1989

583
판파(판파)와 압전센서를 이용한 복합재 구조물의 손상평가 = Damage assessment for composite structures using plate wave and piezoelectric sensorslink

김영한; Kim, Young-Han; et al, 한국과학기술원, 2004

584
폐쇄형 풍동 시험부내의 정상 및 비정상 박리 흐름에 대한 Blockage 보정 기법 연구 = A study on the blockage correction method for steady and unsteady separated flows in a closed test section wind tunnellink

강승희; Kang, Seung-Hee; et al, 한국과학기술원, 2005

585
폴리프로필렌이 함침된 유리섬유 강화 복합재를 적용한 부품 성형 조건에 따른 물성 영향 = Effect of molding conditions on mechanical properties for parts using glass fiber reinforced composites impregnated with polypropylenelink

이종욱; 김천곤; et al, 한국과학기술원, 2022

586
풍동시험부의 벽면간섭 및 적응벽면 모형에 관한 수치적 연구 = Numerical study on wall interference and adaptive wall models for wind tunnel test sectionlink

장병희; Chang, Byeong-Hee; et al, 한국과학기술원, 1996

587
풍동시험에서 풍력터빈 블레이드의 실속 전 공력성능 보정기법 및 공력소음원 측정기법 연구 = On the correction method for the pre-stall aerodynamic performance of the scaled wind turbine model blade and the measurement method for the aero-acoustic noise source in the wind tunnellink

조태환; Cho, Tae-Hwan; et al, 한국과학기술원, 2010

588
플레어가 부착된 발사체의 저면 항력에 관한 연구 = Study of Base Drag Prediction for Flared Projectileslink

선철; Sun, Chul; et al, 한국과학기술원, 2011

589
필라멘트 와인딩된 압력 탱크의 점진적 파손 해석 및 설계 = Progressive failure analysis and design of filament wound pressure vesselslink

박재성; Park, Jae-Sung; et al, 한국과학기술원, 2002

590
항공기 생존성 향상을 위한 후방동체 온도 저감 및 IR 신호 연구 = Investigation of ir signature and temperature reduction of the rear fuselage for an aircraft survivabilitylink

이경주; Yi, Kyung-joo; et al, 한국과학기술원, 2014

591
항공기 익형 공력특성 향상을 위한 유동제어 기법에 관한 수치적 연구 = Numerical study about a flow control mechanism for the enhancement of aerodynamic characteristics of 2-D airfoilslink

최성윤; Choi, Sung-Yoon; et al, 한국과학기술원, 2008

592
항공우주시스템용 직접 NaBH4/H2O2 연료전지의 개발 및 검증 = Development and validation of direct NaBH4/H2O2 fuel cell for aerospace systemlink

오택현; Oh, Taek-Hyun; et al, 한국과학기술원, 2013

593
헬리콥터 로터의 후류 형상 및 성능 예측을 위한 순차적 시간 적분 자유 후류법 개발 = Development of a time-marching free-wake method for the prediction of helicopter rotor wake geometry and performancelink

라선욱; Na, Seon-Uk; et al, 한국과학기술원, 1998

594
헬리콥터 무힌지 로터시스템의 복합재료 적용을 통한 구조동역학 특성 향상에 대한 실험적 연구 = An experimental study on structural dynamic characteristics improvement by applying composite materials to the helicopter hingeless rotor systemlink

김덕관; Kim, Deog-Kwan; et al, 한국과학기술원, 2011

595
형상 기억 합금 작동기를 이용한 가변 형상 날개 개발 및 형상 제어 = Development of morphing wing and shape control using shape memory alloy actuatorlink

임미선; Rim, Mi-Sun; et al, 한국과학기술원, 2014

596
형상기억합금 기반 가변 강성 메쉬 절연계 개발 = Development of stiffness tunable mesh isolator based on shape memory alloylink

정호경; Jeong, Ho-Kyeong; et al, 한국과학기술원, 2014

597
형상기억합금 의탄성 효과 기반 파이로 충격 저감용 메쉬 절연계 개발 = development of pyroshock mesh isolator based on SMA pseudoelasticitylink

윤세현; Youn, Se-Hyun; et al, 한국과학기술원, 2010

rss_1.0 rss_2.0 atom_1.0