1 | 3차원 유한요소법을 사용한 복합재 적층판의 점진적인 파손해석 = Progressive failure analysis of composite laminate using 3-D finite element methodlink 주상건; Joo, Sang-Gun; et al, 한국과학기술원, 2000 |
2 | Cross-ply 복합적층구조의 섬유방향 파손 특성에 관한 연구 = Transverse failure in cross-ply laminated compositeslink 임승규; Lim, Seung-Gyu; et al, 한국과학기술원, 1988 |
3 | Fracture analysis of finite composite plate witha central crack = 중앙에 균열이 있는 복합재료 유한평판의 파괴해석link Yum, Young-Jin; 엄영진; et al, 한국과학기술원, 1989 |
4 | Free-edge delamination in advanced composite laminates = 고등 복합재료 적층판의 자유경계단 층간분리에 대한 연구link Kim, Dong-Min; 김동민; et al, 한국과학기술원, 1991 |
5 | Improvement of EFPI sensor system for damage detection of composites = 복합재료 손상검출을 위한 EFPI 센서 시스템의 개선에 관한 연구link Kim, Dae-Hyun; 김대현; et al, 한국과학기술원, 2004 |
6 | Jk 적분을 이용한 이방성 복합적층판에 대한 혼합모우드 균열문제의 해석 = Applicationn of the Jk integral to the analysis of mixed mode crack problems for anisotropic composite laminateslink 주석재; Chu, Seok-Jae; et al, 한국과학기술원, 1990 |
7 | Optimal design of axisymmetric filament wound structures based on semi-geodesic path algorithm = 준측지궤적 알고리즘을 적용한 필라멘트 와인딩 된 복합재 축대칭 구조물의 최적설계link Kim, Cheol-Ung; 김철웅; et al, 한국과학기술원, 2004 |
8 | Post-failure analysis of composite laminated structure = 복합재 구조물의 초기파손후의 거동 해석link Kim, Yong-Wan; 김용완; et al, 한국과학기술원, 1992 |
9 | Probabilistic deformation and strength prediction for filament wound composite pressure vessel = 필라멘트 와인딩 복합재 압력 용기의 확률 변형 및 강도 예측link Hwang, Tae-Kyung; 황태경; et al, 한국과학기술원, 2003 |
10 | Signal and mechanical characteristics of FBG sensors embedded into composite structures = 복합재 구조에 삽입된 FBG 센서의 신호 및 기계적 특성 연구link Kang, Dong-Hoon; 강동훈; et al, 한국과학기술원, 2004 |
11 | Thermoelastic analysis of carbon/carbon composite brake disks = 탄소/탄소 복합재 브레이크 디스크의 열탄성 연구link Sonn, Hyeon-Wu; 손현우; et al, 한국과학기술원, 1995 |
12 | 간접 경계적분식과 가중함수를 이용한 응력강도계수의 계산 = Calculation of the stress intensity factors using indirect boundary integral equation and weight fuctionlink 이형연; Lee, Hyeong-Yeon; et al, 한국과학기술원, 1995 |
13 | 광섬유 센서를 이용한 복합재 보의 변형률 측정 및 파손 검출 = Strain measurement and failure detection of composite beams using fiber optic sensorslink 권일범; Kwon, Il-Bum; et al, 한국과학기술원, 1997 |
14 | 광섬유 센서를 이용한 스마트 복합재 구조물의 다중 파라메터 동시 측정에 관한 연구 = Simultaneous measurement of multi-parameters of smart composite structures using fiber optic sensorslink 강현규; Kang, Hyun-Kyu; et al, 한국과학기술원, 2001 |
15 | 다중화 기법에 의한 광섬유 브래그 격자 센서를 이용한 스마트 복합재 구조물의 변형률 모니터링에 관한 연구 = The strain monitoring of smart composite structures using fiber bragg grating sensors by multiplexing methodlink 류치영; Ryu, Chi-Young; et al, 한국과학기술원, 2001 |
16 | 단축방향으로 두께변화가 있는 이방성 샌드위치 구조물의 해석 = Analysis of anisotropic sandwich structures with unidirectional thickness variationlink 전재수; Jeon, Jae-Soo; et al, 한국과학기술원, 1992 |
17 | 두꺼운 복합적층판의 층간응력에 대한 3차원 유한요소해석 = Three-dimensional finite element analysis of interlaminar stresses in thick composite laminateslink 김정엽; Kim, Jung-Yub; et al, 한국과학기술원, 1991 |
18 | 보강된 복합적층 판넬의 좌굴 및 좌굴후 거동 = Buckling and postbuckling behavior of stiffened laminated composite panelslink 이인철; Lee, In-Cheol; et al, 한국과학기술원, 1995 |
19 | 복합재 구조물의 변형률과 고주파 진동의 동시 측정을 위한 광섬유 브래그 격자 센서 시스템의 개발 = Development of fiber bragg grating sensor system for the simultaneous measurement of strain and high-frequency vibration in composite structureslink 고종인; Koh, Jong-In; et al, 한국과학기술원, 2004 |
20 | 복합재 압력용기의 기하학적 비선형및 재료 비선형 해석 = Geometrically and materially nonlinear analysis for composite pressure vessellink 도영대; Doh, Young-Dae; et al, 한국과학기술원, 1995 |
21 | 복합재료 면재를 갖는 샌드위치 평판의 탄성 및 점탄성 해석 = Elastic/viscoelastic analysis of sandwichplates with composite faceslink 김천곤; Kim, Chun-Gon; et al, 한국과학기술원, 1987 |
22 | 복합재료 직교적층판의 모재균열 증가와 강성저하에 관한 연구 = Progressive transverse cracking and stiffness reduction in cross-ply laminated compositeslink 이재화; Lee, Jae-Hwa; et al, 한국과학기술원, 1992 |
23 | 복합재료의 모재파손 시 광섬유센서의 신호특성에 관한 연구 = Signal characteristics of fiber optic sensor under matrix failures of compositeslink 박중완; Park, Joong-Wan; et al, 한국과학기술원, 2000 |
24 | 복합적층 원통판넬의 좌굴후 거동 해석 = Postbuckling analysis of composite laminated cylindrical panelslink 권진회; Kweon, Jin-Hwe; et al, 한국과학기술원, 1993 |
25 | 복합적층보를 이용한 층간파괴인성 특성연구 = Characterization of interlaminar fracture toughness by laminated composite beamslink 심재열; Shim, Jae-Yeul; et al, 한국과학기술원, 1994 |
26 | 비대칭 복합적층평판의 경화된 형상에 대한 비선형 워핑해석 = Nonlinear warping analysis of the cured shape in unsymmetrically laminated plateslink 전완주; Jun, Wan-Jun; et al, 한국과학기술원, 1989 |
27 | 손상허용을 고려한 복합재 보강 구조물의 구조거동에 관한 연구 = A study on the structural behavior of composite stiffened structure considering damage tolerancelink 공철원; Kong, Cheol-Won; et al, 한국과학기술원, 2000 |
28 | 스트링거 보강 복합적층 원통 판넬의 좌굴후 거동 해석 = Postbuckling analysis of stringer-stiffened laminated composites cyclindrical panels under compressionlink 김조권; Kim, Zoh-Gweon; 홍창선; 김천곤; et al, 한국과학기술원, 1995 |
29 | 유한요소법을 이용한 원통형 복합적층 판넬의 비선형좌굴해석 = Nonliear buckling analysis of cylindrical composite panels by the finite element methodlink 전승문; Jeon, Seung-Moon; et al, 한국과학기술원, 1988 |
30 | 저속충격을 받는 복합적층판의 거동과 손상에 대한 연구 = Response and damage of composite laminates subjected to low-velocity impactlink 최익현; Choi, Ik-Hyeon; et al, 한국과학기술원, 1994 |
31 | 적층 복합재 구조물에 대한 확률유한요소법과 시스템 신뢰도 해석 = Stochastic finite element method and system reliability analysis for laminated composite structureslink 박지상; Park, Ji-Sang; et al, 한국과학기술원, 1995 |
32 | 층간분리가 존재하는 복합재 적층판의 좌굴 및 좌굴후거동 해석 = Bucking and postbuckling behavior of composite laminates with a delaminationlink 김효진; Kim, Hyo-Jin; et al, 한국과학기술원, 1994 |
33 | 탄소섬유강화 복합재료의 혼합모우드 층간파괴특성에 관한 연구 = Characterization of interlaminar fracture in graphite/epoxy composite under mixed-mode deformationslink 윤성호; Yoon, Sung-Ho; et al, 한국과학기술원, 1990 |
34 | 필라멘트 와인딩된 압력 탱크의 점진적 파손 해석 및 설계 = Progressive failure analysis and design of filament wound pressure vesselslink 박재성; Park, Jae-Sung; et al, 한국과학기술원, 2002 |