Browse "AE-Theses_Ph.D.(박사논문)" by Issue Date 

Jump to a point in the index:

Showing results 181 to 200 of 630

181
폐쇄형 풍동 시험부내의 정상 및 비정상 박리 흐름에 대한 Blockage 보정 기법 연구 = A study on the blockage correction method for steady and unsteady separated flows in a closed test section wind tunnellink

강승희; Kang, Seung-Hee; et al, 한국과학기술원, 2005

182
병렬화된 직접모사법을 이용한 극음속 외부 대기와 측면 제트 상호 작용에 대한 연구 = Analysis of the interaction between hypersonic free stream and side jet flow using a parallel DSMC methodlink

김민규; Kim, Min-Gyu; et al, 한국과학기술원, 2005

183
압축성 난류 모형에 대한 연구 : 제한자와 압력-변형률 모델 = A study on modeling of compressible turbulence : limiters and pressure-strain modellink

박창환; Park, Chang-Hwan; et al, 한국과학기술원, 2005

184
Waypoint guidance synthesis using optimal impact-angle-control laws = 최적 표적입사각 제어 법칙을 이용한 경로점 유도기법link

Ryoo, Chang-Kyung; 유창경; et al, 한국과학기술원, 2006

185
Design and fabrication of radar absorbing structures including frequency selective fabric composites = 주파수 선택적인 직물 복합재료를 갖는 전자파 흡수 구조체의 제작 및 설계link

Lee, Sang-Eui; 이상의; et al, 한국과학기술원, 2006

186
유한한 길이를 갖는 얇은 탄성도관 안의 회전하는 이극소음원에 의한 방사 = Radiation from a rotating dipole source in a finite elastic thin ductlink

최한림; Choi, Han-Lim; et al, 한국과학기술원, 2006

187
수축-팽창 디퓨저를 갖는 환형 분사 초음속 이젝터 성능 특성 = Performance characteristics of annular injection supersonic ejector equipped with a converging-diverging diffuserlink

김세훈; Kim, Se-Hoon; et al, 한국과학기술원, 2006

188
불확실성을 고려한 효율적인 공력 형상 최적 설계에 대한 연구 = A study on the efficient aerodynamic shape design optimization with uncertaintieslink

김수환; Kim, Su-Whan; et al, 한국과학기술원, 2006

189
Inverse heat transfer analysis in axisymmetric enclosure and concentric annulus = 축대칭 원통형상 및 동심 환형관에서의 역열전달 해석link

Kim, Ki-Wan; 김기완; et al, 한국과학기술원, 2006

190
Study on surface configuration control of inflatable structures with SMA actuator = 형상기억합금 작동기를 이용한 팽창형 구조물의 표면 형상 제어 연구link

Roh, Jin-Ho; 노진호; et al, 한국과학기술원, 2006

191
타원 익형 공력 및 유동장 특성에 대한 실험적 연구 = Experimental study on aerodynamic and flow field characteristics of elliptic airfoilslink

권기정; Kwon, Ki-Jung; et al, 한국과학기술원, 2006

192
Simultaneous monitoring of strain and temperature embedded into composites using strength enhanced FBG sensors = 강도가 향상된 FBG 센서를 이용한 복합재 구조물의 온도와 변형률 동시 모니터링에 관한 연구link

Yoon, Hyuk-Jin; 윤혁진; et al, 한국과학기술원, 2006

193
마찰 감쇠기가 있는 블레이드 디스크의 동적 특성에 관한 연구 = A study on dynamic characteristics of a bladed disk with friction damperslink

유재한; Yoo, Jae-Han; et al, 한국과학기술원, 2006

194
Adjoint 민감도 해석 기법을 이용한 헬리콥터 로터의 공력형상 최적설계 = Aerodynamic shape optimization of helicopter rotor blades using an adjoint methodlink

이상욱; Lee, Sang-Wook; et al, 한국과학기술원, 2006

195
비정렬 격자계에서 point Gauss-Seidel 방법을 위한 효율적이고 강건한 내재적 연산자 개발 = Development of efficient and robust implicit operators for point gauss-seidel method on unstructured mesheslink

김주성; Kim, Joo-Sung; et al, 한국과학기술원, 2006

196
(An) analytic study of acoustic diffraction by a finite strip in convected medium = 유동장 내의 유한한 Strip에 의한 음파 회절의 이론적 연구link

Jeon, Won-Ju; 전원주; et al, 한국과학기술원, 2006

197
Multidisciplinary design optimization under uncertainties = 불확실요소들을 고려한 다분야 통합시스템의 최적설계 기법 연구link

Ahn, Joong-Ki; 안중기; et al, 한국과학기술원, 2006

198
Two-dimensional two-fluid two-phase analysis of underwater shock wave and cavitation using approximate jacobian matrix method = 근사 Jacobian 행렬법을 이용한 수중 충격파와 캐비테이션 문제의 이차원 이유체 이상유동 해석link

Yeom, Geum-Su; 염금수; et al, 한국과학기술원, 2006

199
유도탄 생존성 향상을 위한 유도법칙 연구 = Advanced missile guidance laws for enhancing survivabilitylink

이진익; Lee, Jin-Ik; et al, 한국과학기술원, 2006

200
가열로 내 연소현상 및 슬랩 가열 특성에 관한 연구 = Combustion phenomena and slab heating characteristics in a reheating furnacelink

한상헌; Han, Sang-Heon; et al, 한국과학기술원, 2007

rss_1.0 rss_2.0 atom_1.0