Browse "AE-Theses_Ph.D.(박사논문)" by Issue Date 

Showing results 401 to 420 of 605

401
비예열 시동 특성을 갖는 이원 촉매 베드 과산화수소 가스발생기 = Hydrogen peroxide gas generator with dual catalytic bed for non-preheating start-uplink

임하영; Lim, Ha-Young; et al, 한국과학기술원, 2007

402
(An) experimental study on the performance of air foil thrust bearing for application to turbomachinery = 터보기기 응용을 위한 공기 포일 추력 베어링의 성능에 대한 실험적 연구link

Kim, Kyeong-Su; 김경수; et al, 한국과학기술원, 2007

403
An experimental study about the vaporization, ignition and burning of multicomponent fuel droplets at elevated pressures and temperatures = 고온고압에서 다성분 연료 액적의 증발 및 점화, 연소에 관한 실험적 연구link

Khan, Qasim Sarwar; 칸, 카심 살왈; et al, 한국과학기술원, 2007

404
Missile control design considering aerodynamic uncertainties and actuator saturation and fault = 공역학적 불확실성과 구동기 포화 및 고장을 고려한 유도탄 제어link

Hwang, Tae-Won; 황태원; et al, 한국과학기술원, 2007

405
Cryogenic characteristics of composite materials and application to the cryogenic propellant tank = 복합재의 극저온 특성 및 극저온 추진제 탱크 적용을 위한 연구link

Kang, Sang-Guk; 강상국; et al, 한국과학기술원, 2007

406
교란을 포함하는 고리와들의 개구리뜀 거동 및 불안정성에 관한 연구 = A study on the leaplink

임종봉; Yim, Jong-Bbong; et al, 한국과학기술원, 2007

407
Waypoint guidance synthesis using optimal impact-angle-control laws = 최적 표적입사각 제어 법칙을 이용한 경로점 유도기법link

Ryoo, Chang-Kyung; 유창경; et al, 한국과학기술원, 2006

408
Design and fabrication of radar absorbing structures including frequency selective fabric composites = 주파수 선택적인 직물 복합재료를 갖는 전자파 흡수 구조체의 제작 및 설계link

Lee, Sang-Eui; 이상의; et al, 한국과학기술원, 2006

409
유한한 길이를 갖는 얇은 탄성도관 안의 회전하는 이극소음원에 의한 방사 = Radiation from a rotating dipole source in a finite elastic thin ductlink

최한림; Choi, Han-Lim; et al, 한국과학기술원, 2006

410
수축-팽창 디퓨저를 갖는 환형 분사 초음속 이젝터 성능 특성 = Performance characteristics of annular injection supersonic ejector equipped with a converging-diverging diffuserlink

김세훈; Kim, Se-Hoon; et al, 한국과학기술원, 2006

411
불확실성을 고려한 효율적인 공력 형상 최적 설계에 대한 연구 = A study on the efficient aerodynamic shape design optimization with uncertaintieslink

김수환; Kim, Su-Whan; et al, 한국과학기술원, 2006

412
Inverse heat transfer analysis in axisymmetric enclosure and concentric annulus = 축대칭 원통형상 및 동심 환형관에서의 역열전달 해석link

Kim, Ki-Wan; 김기완; et al, 한국과학기술원, 2006

413
Study on surface configuration control of inflatable structures with SMA actuator = 형상기억합금 작동기를 이용한 팽창형 구조물의 표면 형상 제어 연구link

Roh, Jin-Ho; 노진호; et al, 한국과학기술원, 2006

414
타원 익형 공력 및 유동장 특성에 대한 실험적 연구 = Experimental study on aerodynamic and flow field characteristics of elliptic airfoilslink

권기정; Kwon, Ki-Jung; et al, 한국과학기술원, 2006

415
Simultaneous monitoring of strain and temperature embedded into composites using strength enhanced FBG sensors = 강도가 향상된 FBG 센서를 이용한 복합재 구조물의 온도와 변형률 동시 모니터링에 관한 연구link

Yoon, Hyuk-Jin; 윤혁진; et al, 한국과학기술원, 2006

416
마찰 감쇠기가 있는 블레이드 디스크의 동적 특성에 관한 연구 = A study on dynamic characteristics of a bladed disk with friction damperslink

유재한; Yoo, Jae-Han; et al, 한국과학기술원, 2006

417
Adjoint 민감도 해석 기법을 이용한 헬리콥터 로터의 공력형상 최적설계 = Aerodynamic shape optimization of helicopter rotor blades using an adjoint methodlink

이상욱; Lee, Sang-Wook; et al, 한국과학기술원, 2006

418
비정렬 격자계에서 point Gauss-Seidel 방법을 위한 효율적이고 강건한 내재적 연산자 개발 = Development of efficient and robust implicit operators for point gauss-seidel method on unstructured mesheslink

김주성; Kim, Joo-Sung; et al, 한국과학기술원, 2006

419
(An) analytic study of acoustic diffraction by a finite strip in convected medium = 유동장 내의 유한한 Strip에 의한 음파 회절의 이론적 연구link

Jeon, Won-Ju; 전원주; et al, 한국과학기술원, 2006

420
Multidisciplinary design optimization under uncertainties = 불확실요소들을 고려한 다분야 통합시스템의 최적설계 기법 연구link

Ahn, Joong-Ki; 안중기; et al, 한국과학기술원, 2006

rss_1.0 rss_2.0 atom_1.0