AE-Theses_Ph.D.(박사논문)

Recent Items

Collection's Items (Sorted by Submit Date in Descending order): 441 to 460 of 618

441
형상기억합금 작동기를 이용한 스마트 구조의 형상 제어에 관한 연구 = A study on shape control of smart structures using shape memory alloy actuatorslink

양승만; Yang, Seung-Man; et al, 한국과학기술원, 2005

442
Low-Earth-Orbit space environment characteristics of nano-filler reinforced polymer matrix composites = 나노필러가 강화된 고분자 복합재료의 지구 저궤도 우주환경 특성에 관한 연구link

Han, Joo-Hyun; 한주현; et al, 한국과학기술원, 2005

443
복합적층판의 두께변화가 램파의 전파에 미치는 영향 = The effect of thickness variation on the propagation of Lamb waves in composite laminateslink

한정호; Han, Jeong-Ho; et al, 한국과학기술원, 2005

444
Optimal design of composite structures using efficient metamodels = 효율적인 메타모델 기법을 적용한 복합재료 구조물의 최적설계link

Oh, Se-Hee; 오세희; et al, 한국과학기술원, 2005

445
접합된 복합재료 적층 구조물의 분리 파손 특성 연구 = Debonding failure characteristics of composite bonded structureslink

김광수; Kim, Kwang-Soo; et al, 한국과학기술원, 2005

446
초음속 충돌 제트 유동의 진동 특성에 관한 수치적 연구 = Numerical investigation of the oscillatory behavior of supersonic impinging jet flowslink

김성인; Kim, Sung-In; et al, 한국과학기술원, 2005

447
벤츄리 스크러버 집진장치의 삼상 유동에 대한 수치 모델링과 성능해석 = Numerical modeling for performance analysis of three-phase flow in venturi scrubberlink

박순일; Pak, Sun-Il; et al, 한국과학기술원, 2005

448
신경회로망을 이용한 가속화된 공진화 알고리듬 및 최적화 응용 = An accelerated co-evolutionary algorithm using neural networks and its application to optimizationlink

홍영석; Hong, Young-Seok; et al, 한국과학기술원, 2005

449
압축성 난류 모형에 대한 연구 : 제한자와 압력-변형률 모델 = A study on modeling of compressible turbulence : limiters and pressure-strain modellink

박창환; Park, Chang-Hwan; et al, 한국과학기술원, 2005

450
병렬화된 직접모사법을 이용한 극음속 외부 대기와 측면 제트 상호 작용에 대한 연구 = Analysis of the interaction between hypersonic free stream and side jet flow using a parallel DSMC methodlink

김민규; Kim, Min-Gyu; et al, 한국과학기술원, 2005

451
비정상 유동 해석을 위한 고차 정확도 수치기법에 대한 연구 = Study on high order accurate numerical schemes for unsteady flow analyseslink

김대희; Kim, Dae-Hee; et al, 한국과학기술원, 2005

452
Flutter stability prediction using the unsteady aerodynamic reduced-order model = 비정상 공기력 축약 모델을 이용한 플러터 안정성 예측 연구link

Kwon, Hyuk-Jun; 권혁준; et al, 한국과학기술원, 2005

453
Improvement of genetic algorithm for optimal design of composite laminated stiffened structures = 복합재 적층 보강 구조물의 최적설계를 위한 개량 유전자 알고리즘의 개발link

Kang, Ji-Ho; 강지호; et al, 한국과학기술원, 2005

454
폐쇄형 풍동 시험부내의 정상 및 비정상 박리 흐름에 대한 Blockage 보정 기법 연구 = A study on the blockage correction method for steady and unsteady separated flows in a closed test section wind tunnellink

강승희; Kang, Seung-Hee; et al, 한국과학기술원, 2005

455
복합재 구조물의 변형률과 고주파 진동의 동시 측정을 위한 광섬유 브래그 격자 센서 시스템의 개발 = Development of fiber bragg grating sensor system for the simultaneous measurement of strain and high-frequency vibration in composite structureslink

고종인; Koh, Jong-In; et al, 한국과학기술원, 2004

456
Optimal control design of fuzzy systems = 퍼지 시스템의 최적 제어 설계link

Park, Yon-Mook; 박연묵; et al, 한국과학기술원, 2004

457
(A) new approach to on-board stationkeeping of GEO-satellites = 정지위성 탑재용 위치유지 시스템에 대한 새로운 접근link

Park, Bong-Kyu; 박봉규; et al, 한국과학기술원, 2004

458
Optimal design of axisymmetric filament wound structures based on semi-geodesic path algorithm = 준측지궤적 알고리즘을 적용한 필라멘트 와인딩 된 복합재 축대칭 구조물의 최적설계link

Kim, Cheol-Ung; 김철웅; et al, 한국과학기술원, 2004

459
Fundamental studies of combustion instabilities in narrow channels = 협소한 채널 내에서의 연소불안정성에 관한 연구link

Kang, Sang-Hun; 강상훈; et al, 한국과학기술원, 2004

460
Signal and mechanical characteristics of FBG sensors embedded into composite structures = 복합재 구조에 삽입된 FBG 센서의 신호 및 기계적 특성 연구link

Kang, Dong-Hoon; 강동훈; et al, 한국과학기술원, 2004

rss_1.0 rss_2.0 atom_1.0