AE-Theses_Master(석사논문)

Recent Items

Collection's Items (Sorted by Submit Date in Descending order): 401 to 420 of 980

401
Pre-stress를 이용한 대변형 벤더형 압전 작동기 연구 = A study on high displacement bender type piezoelectric actuator using pre-stresslink

이종원; Lee, Jong-Won; et al, 한국과학기술원, 2008

402
나노 실리카 분산계가 함침된 고강도 섬유의 마찰효과가 방탄특성에 미치는 영향 = Friction effect on the ballistic impact behavior of nano silica colloid impregnated high strength fabriclink

이성현; Lee, Song-Hyon; et al, 한국과학기술원, 2008

403
Relative position and attitude estimation of satellites in formation flying using Kalman filters and particle filter = 칼만 필터 및 파티클 필터를 이용한 인공위성 편대비행 상대 위치 및 자세 추정link

Lee, Young-Gu; 이영구; et al, 한국과학기술원, 2008

404
Autorotation of an UAV helicopter via reinforcement learning = 강화학습을 이용한 무인 헬리콥터 오토로테이션link

Lee, Dong-Jin; 이동진; et al, 한국과학기술원, 2008

405
켤레구배법을 이용한 2차원 비직교 형상에서의 역복사 해석 = Inverse radiation analysis for a two-dimensional irregular geometry using conjugate gradient methodlink

이경주; Yi, Kyung-Joo; et al, 한국과학기술원, 2008

406
Dynamic modeling and control system design for a quad-rotor UAV = 쿼드 로터 무인항공기 동역학 모델링 및 제어시스템 설계 연구link

Won, Dae-Yeon; 원대연; et al, 한국과학기술원, 2008

407
층별 변위장 이론을 이용한 복합재료 원뿔형 쉘 구조물의 열 좌굴 후 거동 해석 = Thermal postbuckling characteristics of composite conical shell structures using layerwise theorylink

우지혜; Woo, Ji-Hye; et al, 한국과학기술원, 2008

408
Vision-based target tracking architecture for an unmanned aerial vehicle = 무인 항공기 영상 기반 표적 추적 시스템link

Baek, Kwang-Yul; 백광열; et al, 한국과학기술원, 2008

409
평판형 MEMS 고체 추진제 추력기 요소 제작 및 성능 평가 = Fabrication, performance evaluation of components of planar type MEMS solid propellant thrusterlink

박종익; Park, Jong-Ik; et al, 한국과학기술원, 2008

410
선형 안정성 이론을 이용한 압축성 축 대칭 원뿔 경계층의 천이 지점 예측 = Transition predicton of compressible axi-symmetric boundary layers on a sharp cone by using linear stability theorylink

박동훈; Park, Dong-Hoon; et al, 한국과학기술원, 2008

411
형상기억합금이 삽입된 복합재료 구조물의 저속충격해석 = Numerical analysis of shape memory alloy hybrid composite structures subjected to the low velocity impactlink

김은호; Kim, Eun-Ho; et al, 한국과학기술원, 2008

412
연료희박 재연소 시스템에서 NOx 저감과 CO 발생에 관한 연구 = Experimental study of fuel lean reburning system for NOx reduction and CO emissionlink

김학영; Kim, Hak-young; et al, 한국과학기술원, 2008

413
전투기 형상의 외부 장착물과 꼬리날개 공력간섭에 대한 수치적 연구 = Numerical simulation of the interference effect of external stores and tail wing surfaces of a generic fighter aircraftlink

김민재; Kim, Min-Jae; et al, 한국과학기술원, 2008

414
3차원 일대일 충돌 감지 및 회피 실시간 알고리즘 = Real-time algorithm for pairwise collision detection and avoidance in a 3-D airspacelink

김광연; Kim, Kwang-Yeon; et al, 한국과학기술원, 2008

415
Effect of wing placement on transition, boundary layer displacement thickness and broadband noise = 날개 형상이 천이, 경계층 배제두께 광역소음에 미치는 영향에 대한 연구link

Zhao, Lihao; 조입호; et al, 한국과학기술원, 2008

416
음향장내에서 단일 액적의 연소 특성에 관한 연구 = Combustion of a single droplet in an acoustic fieldlink

이승열; Lee, Seung-Yeol; et al, 한국과학기술원, 2007

417
Aircraft control system design and analysis according to flying and handling qualities = 비행성 성능평가에 기준한 항공기의 제어시스템 설계 및 분석link

Kim, Tae-Hun; 김태훈; et al, 한국과학기술원, 2007

418
Fabrication of a micro catalytic combustor and performance evaluation = 마이크로 촉매 연소기의 가공과 성능 검증link

Kim, Chung-Ki; 김충기; et al, 한국과학기술원, 2007

419
Vision-based autonomous landing of a model-scaled rotorcraft UAV = 비전센서를 이용한 무인 헬리콥터의 자동착륙 연구link

Hong, Jin-Sung; 홍진성; et al, 한국과학기술원, 2007

420
형상기억합금이 삽입된 원통형 복합 적층 쉘 구조의 플러터 해석 = Analysis of flutter for the cylindrical composite shell structures with shape memory alloyslink

조성각; Cho, Sung-Kak; et al, 한국과학기술원, 2007

rss_1.0 rss_2.0 atom_1.0