11 | 간헐적인 층간접착면 형상이 Gr/Ep 복합재료의 파괴인성과 파괴인성 기구에 미치는 영향 = Effects of intermittent interlaminar bonding shape on fracture toughness and toughening mechanisms of Gr/Ep compositelink 임승규; Lim, Seung-Gyou; et al, 한국과학기술원, 1984 |
12 | 경계 적분법을 이용한 V-노치 평판의 응력확대계수 계산에 관한 연구 = The computation of the stress intensity factors in the V-notched plates using a contour integral methodlink 김선덕; Kim, Sun-Duck; 홍창선; 김진우; et al, 한국과학기술원, 1983 |
13 | 광섬유 EFPI 센서를 이용한 실시간 고정밀 변위 측정 = Real-time measurement of precision displacement using fiber optic EFPI sensorlink 박상욱; Park, Sang-Wuk; et al, 한국과학기술원, 2003 |
14 | 광섬유 브래그 격자 센서를 이용한 구조물의 동적 변형률 측정 = Dynamic strain monitoring of a structure using fiber bragg grating sensorslink 구본용; Koo, Bon-Yong; et al, 한국과학기술원, 2000 |
15 | 광섬유 브래그 격자 센서를 이용한 복합 적층판의 변형률 측정 = Strain measurement in composite laminates using fiber bragg grating sensorslink 박대인; Park, Dae-In; et al, 한국과학기술원, 1998 |
16 | 광섬유 센서 신호의 실시간 디지탈 처리에 의한 구조물의 동적 변형률 측정 = Structural dynamic strain measurement by the real-time digital processing of the fiber optic sensor signalslink 강현규; Kang, Hyun-Kyu; et al, 한국과학기술원, 1997 |
17 | 광섬유 센서를 이용한 구조물의 열변형 및 온도 측정 = Thermal strain and temperature measurements of structures by using fiber-optic sesnorslink 강동훈; Kang, Dong-Hoon; et al, 한국과학기술원, 2000 |
18 | 광섬유 센서를 이용한 복합재 구조물의 실시간 파손감지 및 변형률 측정 = Real-time failure detection and strain measurement of composite structures using optical fiber sensorslink 방형준; Bang, Hyung-Joon; et al, 한국과학기술원, 2001 |
19 | 광섬유 센서를 이용한 복합재 적층판의 충격 및 좌굴거동 모니터링 = Monitoring of impact and buckling behavior of composite plates using fiber optic sensorslink 노희석; Roh, Hee-Seok; et al, 한국과학기술원, 1999 |
20 | 광섬유센서를 이용한 복합적층판의 모재균열 검출 = Detection of matrix cracking in composite laminates using an optical fiber sensorlink 류치영; Ryu, Chi-Young; et al, 한국과학기술원, 1995 |
21 | 광섬유센서를 이용한 복합적층판의 변형률 측정 = Strain measurement in composite laminates using a fiber optic sensorlink 박중완; Park, Joong-Wan; et al, 한국과학기술원, 1994 |
22 | 광탄성법에 의한 굽힘을 받는 Honeycomb sandwich 판의 원공주위의 응력해석 = Stress analysis around a hole in honeycomb sandwich plate under bending by photoelastic coating techniquelink 이진우; Lee, Jin-Woo; et al, 한국과학기술원, 1982 |
23 | 광탄성을 이용한 원형구멍근처의 대칭형 Edge 균열의 응력확대계수의 결정 = Phtoelastic determination of stress intensity factors for symmetric edge cracks near a circular holelink 박석주; Park, Seok-Joo; et al, 한국과학기술원, 1981 |
24 | 구멍이 있는 복합적층 원통형 판넬의 좌굴 및 좌굴후 거동해석 = Buckling and postbuckling analysis of laminated cylindrical panels with a cutoutlink 김태훈; Kim, Tae-Hoon; et al, 한국과학기술원, 1996 |
25 | 규격부재로 이루어진 구조물의 최적설계 프로그램 개발 = Development of optimal design program for structures with discrete standard elementslink 박흥준; Park, Heung-Joon; 곽병만; 홍창선; et al, 한국과학기술원, 1988 |
26 | 균열면에서의 섬유 방향이 탄소섬유 강화 복합재료의 층간 파괴인성치에 미치는 영향 = Effects of fiber orientations on the crack surface on the interlaminar fracture toughness of Gr/Ep compositeslink 윤성호; Yoon, Sung-Ho; et al, 한국과학기술원, 1985 |
27 | 내압을 받는 원통 복합재 구조물의 볼트 체결 부위 응력 해석 = Stress analysis of bolted joint of cylindrical composite structurelink 박지상; Park, Ji-Sang; et al, 한국과학기술원, 1991 |
28 | 대처짐을 고려한 복합적층판의 저속 충격거동에 대한 연구 = Large deflection analysis of laminated composite subjected to low-velocity impactlink 한정호; Han, Jeong-Ho; et al, 한국과학기술원, 1988 |
29 | 두꺼운 복합적층 링의 열 잔류응력 거동 = Thermal residual stress of thick laminated composite ringslink 김광로; Kim, Kwang-Ro; et al, 한국과학기술원, 1990 |
30 | 두꺼운 복합적층 쉘의 볼트 체결부위 파손해석 = Failure analysis of bolted joint thick laminated composite shellslink 박정연; Park, Jung-Yean; et al, 한국과학기술원, 1992 |
31 | 두께 방향의 와인딩 각도 변화를 고려한 필라멘트 와인딩 된 압력탱크의 해석 = Analysis of filament wound pressure tank considering winding angle variation in thickness directionlink 김철웅; Kim, Cheol-Ung; et al, 한국과학기술원, 2000 |
32 | 메타모델을 이용한 복합재 구조물의 최적 설계 = Optimum design of composite structures using metamodelslink 이재훈; Lee, Jae-Hun; et al, 한국과학기술원, 2003 |
33 | 모재균열에 의해 발생되는 층간분리 해석 = Analysis of delamination induced by transverse cracklink 신동익; Sin, Dong-Ick; et al, 한국과학기술원, 1993 |
34 | 반사식 광탄성법을 이용한 복합적층판의 변형도 해석 = Strain analysis of laminated composites by the birefringent-coating methodlink 황태경; Hwang, Tae-Kyeong; et al, 한국과학기술원, 1988 |
35 | 반사식 광탄성법을 이용한 복합적층판의 응력강도계수 결정 = Determination of stress intensity factors for composite laminates using birefringent coating methodlink 권상룡; Kwon, Sang-Lyong; et al, 한국과학기술원, 1989 |
36 | 보강된 복합 적층 평판의 좌굴 및 좌굴후 거동해석 = Buckling and postbuckling behavior of stiffened laminated composite panelslink 김광수; Kim, Kwang-Soo; et al, 한국과학기술원, 1994 |
37 | 복합재료 면재를 갖는 샌드위치 평판의 최적화 = Optimization of a sandwich plate with composite faceslink 권일범; Kwon, Il-Bum; et al, 한국과학기술원, 1989 |
38 | 복합재료 파손모드에 따른 광섬유 센서의 신호특성에 관한 연구 = Signal characteristics of a fiber optic sensor for failure modes of composite laminateslink 김대현; Kim, Dae-Hyun; et al, 한국과학기술원, 1999 |
39 | 복합재료의 전자기파 반사특성을 고려한 구조물 설계 및 해석 = Design and analysis of radar absorbing structure considering electromagnetic wave reflection properties of composite platelink 송운형; Song, Woon-Hyoung; et al, 한국과학기술원, 2000 |
40 | 복합재료의 혼합모우드 층간파괴인성치의 실험적 평가 = Evaluation of mixed mode interlaminar fracture toughness of graphite/epoxy composite materialslink 김형준; Kim, Hyong-Jun; et al, 한국과학기술원, 1989 |
41 | 복합적층판의 저속 충격거동에 대한 비선형 해석 = Nonlinear analysis of composite laminates subjected to low-velocity impactlink 최익현; Choi, Ik-Hyeon; et al, 한국과학기술원, 1989 |
42 | 섬유방향 파손이 있는 [90n/0m]s 복합적층판의 층간분리 = Delamination of [90n/0m]s laminate with transverse cracklink 이세영; Lee, Se-Yong; et al, 한국과학기술원, 1988 |
43 | 수정된 ENF 시편을 이용한 복합재료 혼합 모우드 층간파괴인성치 평가 = Evaluation of mixed mode interlaminar fracture toughness of composites by modified ENF specimenlink 정안균; Jeong, An-Kyun; et al, 한국과학기술원, 1990 |
44 | 압축 하중을 받는 복합재료 원통 쉘의 좌굴 해석 = Compressive buckling of composite circular cylindrical shellslink 신동희; Shin, Dong-Heui; et al, 한국과학기술원, 1984 |
45 | 압축하중을 받는 복합적층판 자유경계단에서 층간분리모우드에 대한 연구 = Free edge delamination modes in laminated composite under uniform axial compressionlink 김경환; Kim, Kyoung-Hwan; et al, 한국과학기술원, 1990 |
46 | 열경화성 수지 복합적층 구조물의 성형 후 변형에 관한 연구 = Analysis of deformation after cure in thermoset matrix composite structurelink 박재성; Park, Jae-Sung; et al, 한국과학기술원, 1996 |
47 | 열하중에 의한 복합적층판의 좌굴 = Thermal buckling of rectangular composite laminateslink 이종석; Yi, Chong-Seok; et al, 한국과학기술원, 1990 |
48 | 원공이 있는 복합적층 평판의 좌굴 및 좌굴후 거동 = Buckling and postbuckling behavior of composite plates with a holelink 공철원; Kong, Cheol-Won; et al, 한국과학기술원, 1995 |
49 | 원공이 존재하는 필라멘트 와인딩 압력용기의 거동해석 = Analysis of filament wound pressure vessels with holeslink 주상건; Joo, Sang-Gun; et al, 한국과학기술원, 1993 |
50 | 원통형 복합적층 판넬의 좌굴거동에 관한 실험 및 이론 해석 = Experimental and analytical investigations of buckling behavior of composite laminated cylindrical panellink 권진회; Kweon, Jin-Hwe; et al, 한국과학기술원, 1989 |
51 | 원통형 복합적층 판넬의 좌굴거동에 관한 실험 해석 = Experimental buckling behavior of composite cylindrical panellink 이인철; Lee, In-Cheol; et al, 한국과학기술원, 1990 |
52 | 유전자 알고리즘을 이용한 압축 하중을 받는 보강된 복합적층판의 최적 설계 = Optimal design of compressively loaded stiffened composite panels by genetic algorithmlink 강지호; Kang, Ji-Ho; et al, 한국과학기술원, 1999 |
53 | 유한 요소법에 의한 복합적층된 원통쉘의 좌굴 해석 = Buckling analysis of laminated composite cylindrical shell by the finite element methodlink 고대우; Ko, Dae-Woo; et al, 한국과학기술원, 1984 |
54 | 유한요소법에 의한 원공을 갖는 복합 적층판의 열-구조 해석 = Thermal-structural analysis of laminated composite with a circular hole by finite element methodlink 김정엽; Kim, Jung-Yub; et al, 한국과학기술원, 1982 |
55 | 응력동결-광탄성법을 이용한 3차원 균열의 응력확대계수 결정 = Photoelastic determination of stress intensity factors in three-dimensional crack using stress freezing methodlink 전재영; Jeon, Jae-Young; et al, 한국과학기술원, 1985 |
56 | 잔류 응력으로 인한 비대칭 복합 적층판의 Warping 해석 = Warping analysis of unsymmetric laminated composites by residual curing stresslink 전완주; Jun, Wan-Joo; et al, 한국과학기술원, 1983 |
57 | 저속충격에 의한 복합적층판의 손상 해석 = Damage analysis of composite laminates subjected to low-velocity impactlink 고종인; Koh, Jong-In; et al, 한국과학기술원, 1990 |
58 | 저속충격을 받은 Graphite/epoxy 및 Graphite/PEEK 복합적층판의 잔류 압축강도 = Residual compressive strength of graphite/epoxy and graphite/PEEK composite laminates subjected to low-velocity impactlink 최윤록; Choi, Yoon-Rock; et al, 한국과학기술원, 1993 |
59 | 저속충격을 받은 복합적층판의 잔류 압축강도 = Residual compressive strength of composite laminates subject to low-velocity impactlink 정훈희; Jeong, Hoon-Heui; et al, 한국과학기술원, 1991 |
60 | 초음파 탐상법을 이용한 복합적층판의 저속충격손상 평가 = The evaluation of low-velocity impact damage of composite laminates using ultrasonic textlink 권태훈; Kwon, Tae-Hoon; et al, 한국과학기술원, 1998 |
61 | 축소모형으로 제작된 복합재 Wing box 의 구조시험 및 해석 = Experimental and analytical study on downscaled composite wing boxlink 조재헌; Cho, Jae-Heon; et al, 한국과학기술원, 1997 |
62 | 층간 전단 하중을 받는 복합적 층판의 균열에 대한 간헐적인 층간결합의 영향 = Effects of intermittent interlaminar bonding on the cracked composite laminate under interlaminar shear loadinglink 유동희; Yoo, Dong-Hee; et al, 한국과학기술원, 1984 |
63 | 통합-세부 변분 모델을 이용한 복합적층판의 층간응력 해석 및 층간분리에 대한 연구 = Interlaminar stress and delamination analysis of laminated composites by a global-local variational modellink 김동민; Kim, Dong-Min; 홍창선; 곽병만; et al, 한국과학기술원, 1986 |
64 | 편광 유지 광섬유 브래그 격자 센서를 이용한 하중과 횡방향 변형률의 측정 = Measuring of load and transverse strain using polarization maintaining fiber bragg grating sensorlink 윤혁진; Yoon, Hyuk-Jin; et al, 한국과학기술원, 2002 |
65 | 표면결함이 있는 복합적층 시편의 강도 = Strength of composite laminate with surface notchlink 이세규; Lee, Sei-Kyu; et al, 한국과학기술원, 1990 |
66 | 핀을 통해 하중을 받는 원공의 균열에 대한 응력확대계수의 Clearance 및 interference 영향 = Effects of clearance and interference on stress intensity factors for cracks emanating from a pin-loaded holelink 강범수; Kang, Beom-Soo; et al, 한국과학기술원, 1983 |
67 | 핀을 통해 하중을 받는 원공의 균열에 대한 응력확대계수의 광탄성 측정 = Photoelastic determination of stress intensity factors for cracks emanating fron pin-loaded holeslink 주석재; Chu, Seok-Jae; et al, 한국과학기술원, 1981 |
68 | 홈이 있는 전단 시편을 이용한 두꺼운 섬유강화 복합 적층판의 횡 전단 강도 = Transverse shear strength of thick fiber reinforced composites by slotted shear specimenlink 손현우; Sonn, Hyeon-Wu; et al, 한국과학기술원, 1988 |