Browse "AE-Theses_Master(석사논문)" by Title 

Showing results 524 to 543 of 948

524
레이더 반사면적 감소 기술이 적용된 구조체 안테나의 설계 및 제작 = Design and fabrication of structural antenna with radar cross section reduction technologylink

장홍규; Jang, Hong-Kyu; et al, 한국과학기술원, 2008

525
레이저 구조 훈련과 생성 모델을 활용한 type IV 복합재 연료 용기의 음향방출 구조 건전성 모니터링 = Acoustic emission structural health monitoring using laser structural training and generative model in type IV composites fuel tanklink

이준민; Lee, Jung-Ryul; et al, 한국과학기술원, 2021

526
레이저 유도 충격파의 파이로 충격파 전달 평가 및 저감 설계 활용 = Pyroshock propagation evaluation using laser induced shock and application to pyroshock reduction designlink

김용운; 이정률; et al, 한국과학기술원, 2017

527
레이저 초음파 검사 기반 3D 프린트 CFRP 복합재 제작결함 탐지 연구 = Study on manufacturing defects detection of 3D-printed CFRP composites based on laser ultrasonic testinglink

조상연; 이정률; et al, 한국과학기술원, 2022

528
레이저 초음파 검사 기반 저항 점용접부 품질 진단에 관한 연구 = Study on quality diagnosis of resistance spot welding based on laser ultrasonic inspectionlink

엄수현; 이정률; et al, 한국과학기술원, 2021

529
레이저 초음파 기반 판재의 두께방향 및 면내방향 탄성계수 측정법 개발 = Development of measurement method of in-plane and out-of-plane elastic moduli of plates based on laser ultrasoundlink

이재호; 이정률; et al, 한국과학기술원, 2020

530
레이저간섭계를 이용한 표면마찰력 특정에 관한 연구 = Skin frictionin measurement using laser interferometer skin friction meterlink

남궁호웅; Namkoong, Ho-Woong; et al, 한국과학기술원, 1995

531
로버 기반 항공기 MRO 현장 레이저 초음파 검사 기법 연구 = Study on aircraft MRO in-situ laser ultrasonic inspection techniques based on roverlink

전무승; 이정률; et al, 한국과학기술원, 2022

532
로켓 이상 배기 플룸과 노즐 기저부와의 상호 작용에 관한 수치적 연구 = Numerical analysis of the interaction between rocket two-phase exhaust plume and nozzle baselink

모세준; Mo, Se-Jun; et al, 한국과학기술원, 2002

533
로켓노즐에서의 난류 경계층 전개 및 열전달에 관한 수치적 연구 = A numerical study of turbulent boundary-layer development and convective heat transfer in rocket nozzleslink

박종원; Park, Jong-Weon; et al, 한국과학기술원, 1987

534
로터 블레이드의 형상이 헬리콥터의 성능과 소음에 미치는 영향 = Effect of rotor blade geometry helicopter performance and noiselink

정춘면; Jung, Chun-Meun; et al, 한국과학기술원, 1992

535
로터 소음에 있어서의 위상간섭 영향 = Effectof phase interference on rotor noiselink

박승철; Park, Seung-Cheol; et al, 한국과학기술원, 1990

536
로터 후류와 동체의 상호 작용에 대한 연구 = A study on the interaction between rotor wake and fuselagelink

김범섭; Kim, Bum-Sub; et al, 한국과학기술원, 2002

537
로터의 영향을 고려한 틸트로터기 주익의 공력해석 = Cruise mode wing aerodynamics of tilt-rotor UAV with rotor effectlink

김영화; Kim, Young-Hwa; et al, 한국과학기술원, 2007

538
마이크로 고체 추진제 추력기 요소의 성능 평가 = Performance evaluation of components of micro solid propellant thrusterlink

이종광; Lee, Jong-Kwang; et al, 한국과학기술원, 2004

539
마이크로 단일 추진제 추력기를 위한 촉매 반응기의 설계 및 가공 = Design and microfabrication of catalytic reactor for a micro monopropellant thrusterlink

안성용; An, Sung-Yong; et al, 한국과학기술원, 2006

540
마이크로 스케일 촉매 연소기에서의 수소-공기 예혼합 가스의 연소 특성 = Combustion characteristics of premixed hydrogen-air in micro scale catalytic combustorslink

최원영; Choi, Won-Young; et al, 한국과학기술원, 2005

541
마이크로 연료 개질을 위한 촉매 반응기의 설계, 제작 및 성능평가 = Design, fabrication and performance evaluation of catalytic reactor for micro fuel reforminglink

김태규; Kim, Tae-Gyu; et al, 한국과학기술원, 2005

542
마이크로 유전자 알고리즘을 이용한 보강 적층된 복합재 구조물의 최적설계 = Optimal design of composite laminated stiffened structures using micro genetic algorithmlink

이무근; Yi, Moo-Keun; et al, 한국과학기술원, 2006

543
마하수 5에서 회전하는 blunt body의 유동 및 열전달에 관한 수치해석 = Numerical analysis of flow and heat transfer of a spinning blunt body at mach 5link

이명섭; Lee, Myung-Sup; et al, 한국과학기술원, 2000

rss_1.0 rss_2.0 atom_1.0