Browse "AE-Theses_Master(석사논문)" by Type Thesis(Master)

Showing results 601 to 620 of 980

601
병렬화된 비정렬 중첩 격자기법을 통한 로터-기체간 간섭현상의 수치적 연구 = Numerical simulation of rotor-airframe interaction using a parallel unstructured chimera techniquelink

유주열; You, Ju-Yeol; et al, 한국과학기술원, 2007

602
보-트러스 복합구조물의 최적 설계 = Optimal design of beam-truss bulit-up structureslink

박정선; Park, Jung-Sun; et al, 한국과학기술원, 1985

603
보강된 복합 적층 평판의 좌굴 및 좌굴후 거동해석 = Buckling and postbuckling behavior of stiffened laminated composite panelslink

김광수; Kim, Kwang-Soo; et al, 한국과학기술원, 1994

604
보존형을 이용한 이차원 비정상 천음속 유동 계산 = 2D unsteady transonic potential flow calculations using a conservation formlink

이인원; Lee, In-Won; et al, 한국과학기술원, 1994

605
복사매개체 내에서의 화염면과 연료표면 사이의 열전달에 관한 매개변수 연구 = Parametric study on the heat transfer in a radiating medium between flame and fuel surfaceslink

이찬; Lee, Chan; et al, 한국과학기술원, 1988

606
복사열전달을 고려한 수직평판의 자연대류 경계층에 관한 연구 = Effect of thermal radiation on the free convective boundary layer of a vertical flat platelink

고현진; Ko, Hyun-Jin; et al, 한국과학기술원, 1993

607
복사효과를 고려한 기체-입자 직접접촉식 열교환기 해석 = Analysis of a gas-particle direct-contact heat exchanger with radiation effectlink

박재현; Park, Jae-Hyun; et al, 한국과학기술원, 1998

608
복사효과를 고려한 수소/공기/불활성입자 혼합물에서의 화염전파에 대한 연구 = A study on flame propagation through a mixture of Hydrogen/air and inert particles with radiation effectlink

김덕연; Kim, Deok-Yeon; et al, 한국과학기술원, 1999

609
복수 이해관계자 관점을 고려한 vehicle routing problem의 파레토 프론트 생성 = Pareto front generation for the vehicle routing problem with vector profitslink

고재열; 안재명; et al, 한국과학기술원, 2018

610
복잡한 구조에서 레이저 훈련 기반 음향방출 위치표정 및 손상 누적 가시화 = Acoustic emission localization and damage accumulation visualization in complex structures based on laser elastic wave traininglink

정병학; 이정률; et al, 한국과학기술원, 2019

611
복합재 구조에 삽입된 광섬유 센서의 개선된 ingress/egress 기법 개발 = Improved ingress/egress methods for optical fibers embedded in the composite structureslink

박상오; Park, Sang-Oh; et al, 한국과학기술원, 2005

612
복합재료 날개의 진동특성 = Vibration characteristics of composite winglink

조덕형; Cho, Deok-Hyung; et al, 한국과학기술원, 1989

613
복합재료 날개의 하중 재분포 및 조종면 리버설 특성에 대한 정적 공탄성 해석 = Static aeroelastic analysis for load redistribution and control surface reversal of composite winglink

김은석; Kim, Eun-Seok; et al, 한국과학기술원, 1990

614
복합재료 로우터 블레이드에 대한 공력탄성학적 최적설계 = Aeroelastic optimum design for composite rotor bladeslink

권혁준; Kwon, Hyuk-Jun; et al, 한국과학기술원, 2000

615
복합재료 링크의 해석 및 최적화 = Analysis and optimization of composite linkslink

김수현; Kim, Soo-Hyun; et al, 한국과학기술원, 2003

616
복합재료 면재를 갖는 샌드위치 평판의 최적화 = Optimization of a sandwich plate with composite faceslink

권일범; Kwon, Il-Bum; et al, 한국과학기술원, 1989

617
복합재료 무베어링 로우터 시스템의 정지 비행시 공탄성 해석 = Aeroelastic analysis of composite bearingless rotors in hoverlink

임인규; Lim, In-Gyu; et al, 한국과학기술원, 2004

618
복합재료 파손모드에 따른 광섬유 센서의 신호특성에 관한 연구 = Signal characteristics of a fiber optic sensor for failure modes of composite laminateslink

김대현; Kim, Dae-Hyun; et al, 한국과학기술원, 1999

619
복합재료 평판의 초음속 플러터 해석 = Flutter analysis of composite panels in supersonic flowlink

조맹효; Cho, Maeng-Hyo; et al, 한국과학기술원, 1990

620
복합재료 헬리콥터 블레이드의 동적 특성 = Dynamic characteristics of a composite helicopter rotor bladelink

차호철; Cha, Ho-Chul; et al, 한국과학기술원, 1989

rss_1.0 rss_2.0 atom_1.0