Browse "AE-Theses_Master(석사논문)" by Title 

Showing results 481 to 500 of 980

481
군집 수소 화염의 상호작용 메커니즘에 관한 실험적 연구 = Experimental investigation of flame-flame interaction mechanisms of multi-element hydrogen flame ensemblelink

최용석; 김규태; et al, 한국과학기술원, 2022

482
궤도 공분산과 충돌 확률을 고려한 우주 감시 레이더의 스케줄링 기법 = Scheduling method for space situational awareness radar considering orbit covariance and collision probabilitylink

박경근; 최한림; et al, 한국과학기술원, 2018

483
궤도상 연료 재보급 기지를 활용한 이중 모드 재해 모니터링 위성군의 운용에 관한 연구 = A study of dual-mode disaster monitoring constellation operations supported by on-orbit refueling depotslink

성태현; Seong, TaeHyun; et al, 한국과학기술원, 2015

484
규격부재로 이루어진 구조물의 최적설계 프로그램 개발 = Development of optimal design program for structures with discrete standard elementslink

박흥준; Park, Heung-Joon; 곽병만; 홍창선; et al, 한국과학기술원, 1988

485
균열면에서의 섬유 방향이 탄소섬유 강화 복합재료의 층간 파괴인성치에 미치는 영향 = Effects of fiber orientations on the crack surface on the interlaminar fracture toughness of Gr/Ep compositeslink

윤성호; Yoon, Sung-Ho; et al, 한국과학기술원, 1985

486
균일전단류가 원통형 실린더 주변의 압력및 표면 마찰력 분포에 미치는 영향 = The effect of upstream uniform shear on the distributions of pressure and skin friction aroud a circular cylinderlink

김상준; Kim, Sang-Jun; et al, 한국과학기술원, 1985

487
그래픽 환경을 이용한 상호 대화 방식의 2차원 격자 생성 프로그램 개발 = Development of interactive 2-dimensional grid generation code using GUIlink

선철; Sun, Chul; et al, 한국과학기술원, 1997

488
그래픽 환경을 이용한 상호 대화 방식의 3차원 격자 생성 프로그램 개발 = Development of interactive 3-Dimensional grid generation program using GUIlink

김윤식; Kim, Yoon-Sik; et al, 한국과학기술원, 1998

489
극저온 환경에서 탄소섬유강화 복합재료의 인장 물성에 관한 연구 = A study on tensile properties of carbon fiber reinforced composites under cryogenic environmentlink

김명곤; Kim, Myung-Gon; et al, 한국과학기술원, 2004

490
극저온에서 탄소섬유강화 복합재료의 미소균열에 대한 저항성 향상에 관한 연구 = A study on the improvement of microcrack resistance of carbon fiber reinforced composites at cryogenic temperaturelink

홍중식; Hong, Joong-Sik; et al, 한국과학기술원, 2006

491
극초음속 저밀도 유동에서 구 항력 측정의 실험적 연구 = Experimental study of sphere drag measurement in hypersonic low density flowlink

이현석; 박기수; et al, 한국과학기술원, 2022

492
기계 학습과 주성분 분석을 이용한 데이터 불균형 하의 비행 중 하중 감시 및 손상 검출 시스템 = In-flight load monitoring and damage detection system using machine learning and principal component analysis under data imbalancelink

신창교; 김천곤; et al, 한국과학기술원, 2022

493
기체 및 고체입자에 의한 화염의 억제 및 소화현상에 대한 연구 = Experimental study on flame inhibition and extinction by gas and solid powder agentslink

이창엽; Lee, Chang-Yeop; et al, 한국과학기술원, 2004

494
기체-입자 2상 매질에서의 복합 열전달 해석 = Analysis of combined heat transfer of gas-particle two-phase medialink

이형주; Lee, Hyung-Ju; et al, 한국과학기술원, 1999

495
기체복사를 고려한 밀폐공간내 고체연료의 점화현상에 관한 연구 = Analysis on ignition of solid fuel in a confined rectangular enclosure with gas radiation effectlink

손영민; Sohn, Young-Min; et al, 한국과학기술원, 1997

496
기하학적 구조 비선형성을 고려한 큰 가로세로비 날개의 동적 공탄성 해석 = Dynamic aeroelastic analysis of a high-aspect-ratio wing considering geometric structural nonlinearitylink

이현기; Lee, Hyun-Ki; et al, 한국과학기술원, 2009

497
기하학적 비선형성을 갖는 유연한 평면 다물체계의 운동 해석 = Geometrically nonlinear analysis of planar flexible multibody systemlink

한재흥; Han, Jae-Hung; et al, 한국과학기술원, 1993

498
기하학적 비선형성을 고려한 대형 풍력터빈 복합재 블레이드의 공탄성 해석 = Aeroelastic analysis of large wind turbine composite blades considering geometric structural nonlinearitylink

정민수; Jeong, Min-Soo; et al, 한국과학기술원, 2010

499
꼬리 로터의 형식 및 회전 방향을 고려한 헬리콥터 제자리 운동의 공력적 실험 연구 = Aerodynamic experimental study of helicopter hover considering several tail rotor types and rotational directionslink

박상하; 이덕주; et al, 한국과학기술원, 2017

500
나노 실리카 분산계가 함침된 고강도 섬유의 마찰효과가 방탄특성에 미치는 영향 = Friction effect on the ballistic impact behavior of nano silica colloid impregnated high strength fabriclink

이성현; Lee, Song-Hyon; et al, 한국과학기술원, 2008

rss_1.0 rss_2.0 atom_1.0