31 | 음장에서의 예혼합화염의 거동에 관한 실험적인 연구 = An experimental investigation on premixed flame front behavior under acoustic fieldslink 김진국; Kim, Jin-Kook; 신현동; Shin, Hyun-Dong, 한국과학기술원, 1996 |
32 | Dynamic modeling and stability analysis for an elastic four-bar mechanism = 탄성사절기구의 동역학적 모델수립 및 안정성해석에 관한 연구link Yang, Koon-Ho; 양군호; Park, Youn-Sik; 박윤식, 한국과학기술원, 1996 |
33 | Aerosol particle deposition in the obstructed duct flow subjected to an electric field = 장애물이 설치된 덕트내 정전유동장에서의 에어로졸 입자 부착현상link Suh, Yong-Jae; 서용재; Kim, Sang-Soo; 김상수, 한국과학기술원, 1996 |
34 | 반도체 패키지 내에 존재하는 균열의 거동에 관한 연구 = A study on behavior of crack in a plastic packagelink 이혁; Lee, Hyouk; 엄윤용; Earmme, Youn-Young, 한국과학기술원, 1996 |
35 | 수직오차 최소자승법에 의한 형상공차 평가 = Evaluation of form tolerances by normal least squareslink 김남현; Kim, Nam-Hyun; 김승우; Kim, Seung-Woo, 한국과학기술원, 1996 |
36 | Low-Reynolds-number k-ε models for separated and reattaching flows = 난류박리 및 재부착 유동해석을 위한 저레이놀즈수 k-ε 난류모델link Park, Tae-Seon; 박태선; Sung, Hyung-Jin; 성형진, 한국과학기술원, 1996 |
37 | 삼각형 다면체 근사법을 이용한 미지자유곡면의 자율적 디지타이징 = Autonomous digitization of unknown free-form surfaces by triangular polyhedral approximationlink 송창규; Song, Chang-Kyu; 김승우; Kim, Seung-Woo, 한국과학기술원, 1996 |
38 | Rigid-viscoplastic finite element analysis of three-dimensional hot extrusion of sections through square dies = 평금형을 이용한 3차원 열간 단면재 압출의 강-점소성 유한요소해석link Kang, Yeon-Sick; 강연식; Yang, Dong-Yol; 양동열, 한국과학기술원, 1996 |
39 | (A) study on the auto-nesting and optimal torch path planning for automatization of laser cutting process = 레이저 절단공정의 자동화를 위한 자동배치 및 최적 절단 경로 계획에 관한 연구link Han, Guk-Chan; 한국찬; Na, Suck-Joo; 나석주, 한국과학기술원, 1996 |
40 | 순수 굽힘하중하에서 표면 피로균열의 닫힘 및 진전거동 = Crack closure and growth behaviour of surface fatigue cracks under pure bending loadinglink 오충석; Oh, Chung-Seog; 엄윤용; 송지호; Earmme, Youn-Young; Song, Ji-Ho, 한국과학기술원, 1996 |