1 | (A) rigid-plastic finite element alalysis of sheet metal forming considering contact and friction = 접촉과 마찰을 고려한 박판성형의 강소성 유한요소해석link Chung, Wan-Jin; 정완진; et al, 한국과학기술원, 1989 |
2 | (A) rigid-plastic finite element formulation considering the effect of geometric change and material anisotropy with application to sheet metal working = 형상변화 효과와 재료의 이방성을 고려한 강소성 유한요소법의 수식화 및 박판금속 성형에의 응용link Kim, Yong-Jin; 김용진; et al, 한국과학기술원, 1986 |
3 | (A) rigid-plastic finite element formulation of continuum elements and its application to sheet metal workin = 연속체요소의 강소성 유한요소 수식화 및 박판금속 성형에의 적용link Lee, Dong-Woo; 이동우; et al, 한국과학기술원, 1997 |
4 | (A) study on rapid manufacturing process and applications by high-speed machining with automatic filling = 고속가공과 자동 충진공정을 이용한 쾌속 제작공정 및 응용에 관한 연구link Shin, Bo-Sung; 신보성; et al, 한국과학기술원, 2002 |
5 | (A) study on the growth and prediction of wrinkles in sheet metal forming processes using bifurcation theory = 분기 좌굴 이론을 이용한 박판성형 공정에서의 주름의 발생 및 예측에 관한 연구link KIM, Jong-Bong; 김종봉; et al, 한국과학기술원, 2000 |
6 | (A) study on the three-dimensional upset forging of prismatic blocks = 3차원 업셋팅 단조에 관한 연구link Kim, Jong-Ho; 김종호; et al, 한국과학기술원, 1986 |
7 | Aanlysis of three-dimensional extrusion of sections = 3차원 압출의 해석link Yang, Dong-Yol; 양동열; et al, 한국과학기술원, 1978 |
8 | Adaptive remeshing of tetrahedral elements by partial redistribution of nodes in sub-domains and its application to the preform design of 3D forming processes = 영역별 절점재분포를 통한 적응 사면체 격자 재구성 및 금속 성형공정의 새로운 예비형상 설계 방법에의 응용link Hong, Jin-Tae; 홍진태; et al, 한국과학기술원, 2006 |
9 | (An) elastic-plastic finite element formulation of single-and multi-layered degenerated shells with application to sheet metal forming = 단층 및 적층 쉘에 대한 탄소성 유한 요소법의 수식화 및 박판 금속 성형에의 응용link Shim, Hyun-Bo; 심현보; et al, 한국과학기술원, 1990 |
10 | Analysis of extrusion of generalized sections considering three-dimensional plastic deformation = 3次元 소성변형을 고려한 一般的 斷面形材의 押出에 관한硏究link Han, Chul-Ho; 한철호; et al, 한국과학기술원, 1986 |
11 | Analysis of gear forging process and die deformation by using the three-dimensional rigid-plastic finite element method = 3차원 강소성 유한요소법을 이용한 치차 단조공정 및 금형해석에 관한연구link Lee, Nak-Kyu; 이낙규; et al, 한국과학기술원, 1992 |
12 | Analysis of hydroforming of noncircular boxes = 3차원 형상 박판의 Hydroforming 공정에 관한 연구link Noh, Tae-Sung; 노태성; et al, 한국과학기술원, 1987 |
13 | Analysis of profile ring rolling by the upper-bound elemental technique = UBET에 의한 형상 환상압연의 해석link Hahn, Young-Ho; 한영호; et al, 한국과학기술원, 1991 |
14 | Analysis of the ring rolling process by using dual velocity field = 이중속도장을 고려한 환상압연해석link Ryoo, Jang-Soo; 류장수; et al, 한국과학기술원, 1985 |
15 | Analysis of three-dimensional sheet metal forming processes using continuous surface and contact treatment = 연속 곡면 및 접촉 처리 방법에 의한 3차원 박판성형공정해석link Yoo, Dong-Jin; 유동진; et al, 한국과학기술원, 1994 |
16 | Design and development of a lightweight metallic sandwich panel using cross-sectionally curved pyramidal truss cores = 피라미드 내부 구조재의 단면형상을 성형한 경량 금속샌드위치 소재의 설계에 관한 연구link Lee, Sung-Uk; 이성욱; et al, 한국과학기술원, 2016 |
17 | Design and development of a metallic sandwich plate with truss type 3-dimensional inner structures = 3차원 트러스형 구조를 내부에 가지는 금속 샌드위치 판재의 설계 및 제작공정 개발에 관한 연구link Jung, Chang-Gyun; 정창균; et al, 한국과학기술원, 2009 |
18 | Design optimization for three-dimensional forming processes by an approximation scheme based on state variable linearization = 상태변수 선형화에 기초한 근사최적화법에 의한 3차원 금속 성형 공정의 최적 설계link Lee, Seok-Ryol; 이석렬; et al, 한국과학기술원, 2006 |
19 | Development and finite element simulation of vibration assisted casting process = 진동 부가 주조 공정의 개발 및 충전 과정의 수치적 모사link Kim, Ki-Don; 김기돈; et al, 한국과학기술원, 2004 |
20 | Development of a cold incremental rolling process using a line array roll set for the manufacture of doubly curved metal plates = 이중 곡률의 금속 판재 성형을 위한 선형 배열 롤 셋을 이용한 냉간 점진적 롤 성형 공정 개발link Shim, Do-Sik; 심도식; et al, 한국과학기술원, 2010 |
21 | Development of a flexible forming system using the incremental roll forming process for the manufacture of a doubly curved sheet metal = 이중곡률의 판재 성형을 위한 점진적 롤 성형 방식의 유연성형시스템 개발link Yoon, Seok-Joon; 윤석준; et al, 한국과학기술원, 2005 |
22 | Development of basic operating and motion-transforming elements based on elastic design and their applications = 탄성 설계를 이용한 정밀 기본 구동 및 운동 전환 요소의 개발과 응용link Ha, Cheol Woo; 하철우; et al, 한국과학기술원, 2016 |
23 | Development of large-area 3D fabrication process using continuous scanning method and its micro-applications = 연속적 스캐닝 방법을 이용한 대면적 극미세 3차원 형상 제작기술 개발 및 응용link Lim, Tae-Woo; 임태우; et al, 한국과학기술원, 2010 |
24 | Development of three-dimensional scaffolds containing electrospun nanofibers and their applications to tissue regeneration = 전기방사 나노섬유를 포함한 3차원 인공지지체 개발 및 조직재생으로의 적용link Park, Suk-Hee; 박석희; et al, 한국과학기술원, 2011 |
25 | Elasto-plastic explicit FE formulation and parallelization using an adaptive refinement scheme for sheet metal forming = 박판성형에서의 적응요소 세분화 기법을 이용한 외연적 탄소성 유한요소 수식화 및 병렬화link Cho, Jin-Woo; 조진우; et al, 한국과학기술원, 2004 |
26 | Elastoplastic explicit finite element formulation and its applications to sheet metal working with springback = 탄소성 외연적 유한요소수식화 및 스프링백이 고려된 박판성형공정에의 적용link Lee, Sang-Wook; 이상욱; et al, 한국과학기술원, 1998 |
27 | Finite element analysis of high-velocity multi-blow forging processes using explicit time integration scheme = 외연적 시간적분 기법을 이용한 고속 다타격 단조공정의 유한요소해석link Yoo, Yo-Han; 유요한; et al, 한국과학기술원, 1997 |
28 | Finite element analysis of the sheet metal forming processes considering continuous contact treatment = 연속 접촉 처리를 고려한 박판 성형 공정의 유한요소해석link Kim, Tae-Jeong; 김태정; et al, 한국과학기술원, 2005 |
29 | Finite element formulation based on incremental deformation theory for sheet metal forming of planar anisotropic materials = 변형증분이론을 이용한 평면이방성 재료의 박판성형 유한요소 수식화link Yoon, Jeong-Whan; 윤정환; et al, 한국과학기술원, 1997 |
30 | Generation of cutting path data of linear hot-wire cutting system for variable lamination manufacturing = 가변 적층 쾌속 조형 공정을 위한 선형열선절단기의 절단 경로 데이터 생성 방법link Lee, Sang-Ho; 이상호; et al, 한국과학기술원, 2003 |
31 | Hydrofilm extrusion through optimized curved dies = 최적곡면금형을 통한 박막식 정수압 압출link Cho, Nam-Seon; 조남선; et al, 한국과학기술원, 1983 |
32 | Investigation into design and manufacture of reinforced lightweight composite sandwich plates based on polymer pyramidal kagome core = 플라스틱 피라미드 카고메 내부재를 이용한 경량 복합소재 샌드위치 판재의 설계 및 제작에 관한 연구link Hwang, June-Sun; 황준선; et al, 한국과학기술원, 2016 |
33 | Investigation into design of a deformable metallic sandwich plate = 성형 가능한 금속샌드위치판재의 설계에 관한 연구link Seong, Dae-Yong; 성대용; et al, 한국과학기술원, 2010 |
34 | Investigation into Development of Manufacture Process for Repetitive High Aspect Ratio Microstructures using Photosensitive Paste = 감광성 페이스트를 이용한 고종횡비 마이크로 반복구조물의 제작공정 개발에 관한 연구link Ryu, Seung-Min; 류승민; et al, 한국과학기술원, 2010 |
35 | Investigation into development of rapid heat ablation process using hot tool = 열 공구를 이용한 쾌속 열용삭 공정 개발에 관한 연구link Kim, Hyo-Chan; 김효찬; et al, 한국과학기술원, 2006 |
36 | Investigation into development of variable lamination manufacturing using expandable polystyrene foam = 발포 폴리스티렌 폼을 이용한 가변 적층 쾌속 조형 공정 개발에 관한 연구link Ahn, Dong-Gyu; 안동규; et al, 한국과학기술원, 2002 |
37 | Investigation into nano-stereolithography process for fabrication of precise three-dimensional microstructures = 극미세 3차원 형상의 정밀제작을 위한 나노 스테레오리소그래피 공정에 관한 연구link Park, Sang-Hu; 박상후; et al, 한국과학기술원, 2006 |
38 | Investigation into the characteristics of flexible roll forming with incremental counter forming process to improve shape errors of profiles with variable cross-sections = 가변단면을 갖는 프로파일의 가변롤성형 특성분석과 점진적 역성형을 이용한 프로파일의 형상변형 개선에 관한 연구link Park, Jong-Cheol; Yang, Dong-Yol; et al, 한국과학기술원, 2016 |
39 | Investigation into the mechanical behavior and the levelling process of the sheet with sheared protrusions for fuel cell application = 개방형 사다리꼴 패턴을 갖는 소재의 연료전지 응용을 위한 구조특성 분석 및 교정공정에 대한 연구link Lee, Chang-Whan; 이창환; et al, 한국과학기술원, 2014 |
40 | Investigation into the texture evolution and deformation induced material properties in the aluminum extrusion processes = 알루미늄 압출공정에서 미세 조직 및 기계적 성질의 변화에 대한 연구link Kim, Kyung-Jin; 김경진; et al, 한국과학기술원, 2007 |
41 | Investigation into trans-scale 3D fabrication process for fabrication of precise metallic microdevices = 극미세 금속 소자 제작 및 응용을 위한 Trans-scale 3차원 형상 제작에 관한 연구link Son, Yong; 손용; et al, 한국과학기술원, 2013 |
42 | Laser-assisted selective infiltration of superheated μ-droplets for direct fabrication of metal parts = 레이저와 과열된 μ금속방울을 이용한 선택적 용침과 쾌속 부품제작에 관한 연구link Sohn, Hyon-Kee; 손현기; et al, 한국과학기술원, 2003 |
43 | Mesh generation and adaptive refinement of all-hexahedral elements for three-dimensional finite element analysis = 3차원 유한요소 해석을 위한 육면체 요소의 격자 생성 및 세분화에 관한 연구link Park, Chul-Hyun; 박철현; et al, 한국과학기술원, 2005 |
44 | Non - steady state upper - bound analsiys of non - axisymmetic backward extrusion = 비정상상태의 비대칭 후방압출 해석link Bae, Won-Byong; 배원병; et al, 한국과학기술원, 1992 |
45 | Numerical analysis of three-dimensional extrusionof sections through curved dies by the method of weighted residuals = 곡면금형을 통한 3차원 압출의 가중잔류항법에 의한 수치해석link Lee, Choon-Man; 이춘만; et al, 한국과학기술원, 1989 |
46 | Numerical simulation of filling stage in the die casting process using finite element method = 유한요소법을 이용한 다이캐스팅 공정에 있어 충전과정의 수치적 모사link Jeong, Jun-Ho; 정준호; et al, 한국과학기술원, 1998 |
47 | Prediction of deformation-induced anisotropy in profile extrusion of aluminum alloys = 알루미늄 압출공정에서의 변형 이방성 예측에 대한 연구link Lee, Chang-Hui; 이창희; et al, 한국과학기술원, 2002 |
48 | Rigid-plastic finite element analysis of sheet metal forming processes using explicit time integration scheme = 외연적 시간적분법을 이용한 박판성형공정의 강소성 유한요소해석link Jung, Dong-Won; 정동원; et al, 한국과학기술원, 1995 |
49 | Rigid-plastic finite element analysis of sheet metal forming processes using selective membrane/shell formulation and element refinement = 요소의 선택적 혼합 및 재분할을 이용한 박판 성형공정의 강소성 유한요소해석link Song, In-Seob; 송인섭; et al, 한국과학기술원, 1994 |
50 | Rigid-plastic finite element analysis of three-dimensional forging with curved dies = 곡면형상의 금형에 의한 3차원 단조의 강소성 유한 요소 해석link Yoon, Jeong-Ho; 윤정호; et al, 한국과학기술원, 1989 |
51 | Rigid-plastic finite element analysis of three-dimensional forming with recurrent boundary conditions = 반복 경계 조건을 가진 형상의 3차원 성형에 대한 강소성 유한요소해석link Park, Yong-Bok; 박용복; et al, 한국과학기술원, 1995 |
52 | Rigid-viscoplastic finite element analysis of three-dimensional hot extrusion of sections through square dies = 평금형을 이용한 3차원 열간 단면재 압출의 강-점소성 유한요소해석link Kang, Yeon-Sick; 강연식; et al, 한국과학기술원, 1996 |
53 | Three-dimensional automatic mesh generation for remeshing in finite element analysis of metal forming processes = 소성가공공정의 유한요소해석을 위한 3차원 자동격자구성기법link Lee, Young-Kyu; 이영규; et al, 한국과학기술원, 1998 |
54 | Three-dimensional finite element analysis for the industrial extrusion processes using mismatching refinement with domain decomposition = 영역분할에 의한 격자세분화기법을 사용한 3차원 압출공정의 유한요소해석link Park, Keun; 박근; et al, 한국과학기술원, 1999 |
55 | Three-dimensional thermo-viscoplastic finite element analysis of hot forging = 3차원 열간단조의 열-점소성/유한요소해석link Cho, Jong-Rae; 조종래; et al, 한국과학기술원, 1993 |
56 | 소결금속의 3차원 전방압출 해석 = Analysis of the three-dimensional forward extrusion of sintered powder metallink 문재호; Moon, Jae-Ho; et al, 한국과학기술원, 1992 |
57 | 수치모사와 신경회로망을 이용한 사출성형품의 수축해석 = Shrinkage analysis of injection molded parts using numerical simulation and neural networklink 이상찬; Lee, Sang-Chan; 양동열; 윤재륜; et al, 한국과학기술원, 1997 |
58 | 에너지법에 의한 박판 성형공정의 해석에 관한 연구 = Study on the analysis of sheet metal forming processes by the energy methodlink 이항수; Lee, Hang-Soo; et al, 한국과학기술원, 1991 |
59 | 열-점소성 유한요소법을 이용한 대형단조에서의 기공압착해석에 관한 연구 = Analysis of void crushing in the large forging using the thermo-viscoplastic finite element methodlink 박치용; Park, Chi-Yong; et al, 한국과학기술원, 1996 |
60 | 플랜지를 갖는 축류형 부품의 점진적인 반경-축방향 복합단조 공정개발에 관한 연구 = Study on incremental radial-axial forging of flanged shaft partslink 이경훈; Lee, Kyung-Hoon; et al, 한국과학기술원, 2003 |