Browse "ME-Theses_Ph.D.(박사논문) " by Author Lee, Jung-Ju

Showing results 1 to 19 of 19

1
Adhesion strength evaluation and improvement for composite/metal interfaces = 복합재료/금속 계면의 접착 강도 평가 및 향상link

Kim, Won-Seock; 김원석; et al, 한국과학기술원, 2009

2
Bending collapse and energy absorption characteristics of aluminum/CFRP hybrid square hollow section beam for lightweight structure development = 경량 구조 시스템 개발을 위한 알루미늄/CFRP 하이브리드 사각 중공 빔의 굽힘 붕괴 및 에너지 흡수 특성link

Kim, Hee-Chul; 김희철; et al, 한국과학기술원, 2014

3
Cable-driven pulleyless rolling joint with elastic fixtures for medical applications = 메디컬 분야에의 적용을 위한 탄성체 고정형 구름 운동 기반의 도르래가 제거된 케이블 구동 관절link

Suh, Jung-Wook; 서정욱; et al, 한국과학기술원, 2013

4
Design of co-cured single and double lap joints with carbon fiber-epoxy composite and steel adherends = 탄소섬유-에폭시 복합재료와 강재료를 이용한 외면 및 양면겹치기 동시경화조인트의 설계link

Shin, Kum-Cheol; 신금철; et al, 한국과학기술원, 2003

5
Development of the FBG force sensor for Minimally Invasive Surgery and the assessment of the efficacy of force-reflection ability = 최소 침습 수술 로봇용 FBG 힘센서의 개발 및 힘반향의 효용성 평가link

Song, Ho-Seok; 송호석; et al, 한국과학기술원, 2012

6
광강도형 광섬유센서를 이용한 강구조물 및 복합재 구조물의 피로손상 감시 = Monitoring of fatigue damage of steel structures and composite structures using intensity-based optical fiber sensorslink

이동춘; Lee, Dong-Chun; et al, 한국과학기술원, 2000

7
광섬유 샤냑 간섭계를 이용한 고체 매질 내 레이저-여기 초음파의 비접촉식 측정 및 전파 특성에 관한 연구 = A Study on non-contact measurements of laser-generated ultrasonic waves in a solid medium using fiber optic sagnac interferometer and their propagation characteristicslink

장태성; Jang, Tae-Seong; et al, 한국과학기술원, 2003

8
광섬유 센서를 이용한 촉각 감지 센서 시스템에 관한 연구 = A study on the tactile sensor system using optical fiber sensorslink

허진석; Heo, Jin-Seok; et al, 한국과학기술원, 2007

9
구조 안전 감시를 위한 브릴루앙 산란형 광섬유 센서에 관한 연구 = Brillouin scattering-based optical fiber sensor for structural health monitoringlink

조석범; Cho, Seok-Beom; et al, 한국과학기술원, 2005

10
니켈-티타늄 형상기억합금의 압축하중 사이클을 이용한 양방향 형상기억거동의 특성에 관한 연구 = Characteristics of two-way shape memory behavior induced by compressive loading cycles in NiTi shape memory alloylink

김현철; Kim, Hyun-Chul; et al, 한국과학기술원, 2009

11
대형구조물 건전성 감시를 위한 브릴루인 산란 분포형 광섬유 센서의 측정기법 개발 = Development of measurement techniques of a brillouin-scattering distributed optical fiber sensor for integrity monitoring of large structureslink

김상훈; Kim, Sang-Hoon; et al, 한국과학기술원, 2004

12
복합재 패치 접착 수리된 알루미늄 판의 피로균열 진전거동 및 균열 감시 = Fatigue crack growth behavior and crack monitoring of cracked aluminum plate with bonded composite patch repairlink

서대철; Seo, Dae-Cheol; et al, 한국과학기술원, 2002

13
압축하중을 받는 NiTi 형상기억합금의 양방향 작동 특성 및 상변태 모델링에 관한 연구 = A study on the two-way actuating characteristics and martensite transformation kinetics modelling of NiTi shape memory alloy under compressionlink

유영익; Yoo, Young-Ik; et al, 한국과학기술원, 2012

14
원격로봇수술을 위한 작업공간전환기능을 갖춘 수술 작동기의 설계 및 평가 = Design and evaluation of a surgical manipulator with workspace-conversion ability for telerobotic surgerylink

김기영; Kim, Ki-Young; et al, 한국과학기술원, 2012

15
이방성을 지닌 복합재료 판에서 램파의 전파특성 및 변형률과 군속도와의 관계 = Characteristics of lamb wave propagation and relationship between the strain and group velocity of lamb wave in an anisotropic composite platelink

이상호; Rhee, Sang-ho; et al, 한국과학기술원, 2008

16
이종재료 계면균열의 동적에너지방출률 및 T 응력에 관한 연구 = A study on the dynamic energy release rate and T stress of bimaterial interfacial cracklink

신동길; Shin, Dong-Kil; et al, 한국과학기술원, 2001

17
인장-비틀림 복합하중을 받는 형상기억합금 중실축의 응력-변형율 거동에 관한 연구 = A study on the stress-strain behavior of shape memory alloy solid rods under tension-torsion combined loadinglink

정종하; Chung, Jong-Ha; et al, 한국과학기술원, 2007

18
형상기억합금 선을 삽입한 복합적층 보의 좌굴거동 및 제어 = Buckling behaviour and control of a laminated composite beam with embedded shape memory alloy wireslink

최섭; Choi, Sup; et al, 한국과학기술원, 1999

19
형상기억합금 작동기를 위한 시간지연추정 제어기의 적용 = Application of controllers with time delay estimation to an SMA actuatorlink

이효직; Lee, Hyo-Jik; et al, 한국과학기술원, 2004

rss_1.0 rss_2.0 atom_1.0