Browse "ME-Theses_Ph.D.(박사논문) " by Author Kim, Kyung-Woong

Showing results 1 to 29 of 29

1
3차원 탄성유체윤활 문제의 수치해석 = A numerical analysis of the 3-dimensional elastohydrodynamic lubrication problemlink

박태조; Park, Tae-Jo; et al, 한국과학기술원, 1989

2
AE를 이용한 저어널 베어링의 조기 손상 감지 = Early detection of damages in journal bearing using acoustic emissionlink

윤동진; Yoon, Dong-Jin; et al, 한국과학기술원, 1995

3
Herschel-bulkley 모델을 이용한 그리스 열탄성유체윤활문제의 수치해석 = A numerical analysis of grease thermal-elastohydrodynamic lubrication problem using herschel-bulkley modellink

유진규; Yoo, Jin-Gyoo; et al, 한국과학기술원, 1995

4
UV-나노임프린트 리소그래피에서의 점착 및 잔류층 두께 측정에 관한 연구 = A study on adhesion characteristics and measurement of residual layer thickness in UV-nanoimprint lithographylink

허정철; Heo, Jung-Chul; et al, 한국과학기술원, 2012

5
가공 및 조립오차가 능동 자기베어링으로 지지된 축의 성능에 미치는 영향 = The influence of the machining and assembling errors on the performance of the shaft supported by active magnetic bearingslink

김대곤; Kim, Dae-Gon; et al, 한국과학기술원, 1998

6
가스 질화처리된 총강 표면층의 미세균열 거동 및 스폴링 거동 = Microscopic cracking and spalling behavior of the surface layer of a gas-nitrided gun borelink

이명준; Lee, Myung-Jun; et al, 한국과학기술원, 2004

7
고속 앵귤러 콘택트 볼베어링의 마찰토크 특성 = Friction torque characteristics in high speed angular contact ball bearingslink

반종억; Ban, Jong-Eok; et al, 한국과학기술원, 1999

8
그루브가 가공된 스풀밸브의 윤활특성 연구 = A study on the lubrication characteristics of spool-type valve with groovelink

홍성호; Hong, Sung-Ho; et al, 한국과학기술원, 2013

9
기계 부품용 DLC 코팅의 마찰 및 마모 특성에 관한 연구 = A study on friction and wear characteristics of DLC coating used for machine elementslink

김동욱; Kim, Dong-Wook; et al, 한국과학기술원, 2012

10
나노제조 공정용 열가소성 폴리머 필름의 점착 및 마찰 거동에 관한 연구 = A study on adhesion and friction behavior of thermoplastic polymer film for nanofabrication processlink

김광섭; Kim, Kwang-Seop; et al, 한국과학기술원, 2008

11
발전설비용 대형 틸팅패드 저어널 베어링에 관한 연구 = A study on large tilting pad journal bearings for electric power plantslink

하현천; Ha, Hyun-Cheon; et al, 한국과학기술원, 1994

12
범프 타입 포일 저널 베어링의 성능 해석에 관한 연구 = A study on the performance analysis of bump type foil journal bearingslink

이동현; Lee, Dong-Hyun; et al, 한국과학기술원, 2009

13
베어링 입구에서 발생하는 선단압력에 관한 연구 = A study on the inlet perssure build-up at bearing entrancelink

김종수; Kim, Jong-Soo; et al, 한국과학기술원, 1991

14
분자동역학을 이용한 나노임프린트 리소그래피에서의 패턴 전사에 관한 연구 = A molecular dynamics study on pattern transfer in nanoimprint lithographylink

강지훈; Kang, Ji-Hoon; et al, 한국과학기술원, 2007

15
사판식 유압 피스톤 펌프의 손실해석을 위한 미끄럼 부 모델링 및 시뮬레이션 연구 = Theoretical modeling and simulation of sliding parts for the loss analysis of a hydraulic swash-plate type axial piston pumplink

신정훈; Shin, Jung-Hun; et al, 한국과학기술원, 2013

16
슬롯 리스트릭터 공기 저널 베어링의 안정성에 관한 연구 = A study on the stability characteristics of the slot restrictor air journal bearinglink

박정구; Park, Jung-Koo; et al, 한국과학기술원, 2004

17
엔진유 및 자동변속기유 설계에 미치는 윤활 기유의 영향 = Effects of base oil characteristics in engine oils and automatic transmission fluids designlink

권완섭; Kwon, Wan-Seop; et al, 한국과학기술원, 2006

18
외부 가압 공기 베어링의 능동 제어에 관한 연구 = A study on active control of externally pressurized air bearingslink

이정배; Lee, Jeong-Bae; et al, 한국과학기술원, 1998

19
외부가압 공기저어널베어링의 안정성 및 회전정밀도에 관한 연구 = A study on the stability and rotational accuracy of externally pressurized air journal bearinglink

김금모; Kim, Keum-Mo; et al, 한국과학기술원, 1992

20
유한폭 저어널베어링에서의 난류윤활해석 = The analysis of turbulent lubrication of finite journal bearinglink

이득우; Lee, Deug-Woo; et al, 한국과학기술원, 1990

21
윤활유 내의 기포가 저널 베어링 성능에 미치는 영향 = The effect of bubbles in lubricant on the performance of journal bearingslink

최송; Choi, Song; et al, 한국과학기술원, 2004

22
이중범프포일 공기베어링의 성능에 관한 연구 = A study on the performance of double-bump air foil bearingslink

김영철; Kim, Young-Cheol; et al, 한국과학기술원, 2008

23
적층로터 및 고감쇠 베어링의 해석과 펄스발전기의 설계 및 성능 특성에 관한 연구 = Analysis of laminated rotor and high damped bearing and study on design and performance characteristics of pulsed generatorlink

김영춘; Kim, Yeong-Chun; et al, 한국과학기술원, 2004

24
질화규소 세라믹스의 마찰 및 마모 거동에 관한 연구 = A study on friction and wear behavior of $Si_3N_4$ ceramicslink

이기현; Lee, Kee-Hyun; et al, 한국과학기술원, 1994

25
축-베어링 시스템의 비선형 진동 해석 및 안정성 향상 방법에 관한 연구 = A study on nonlinear vibration analysis and improving method of stability characteristics of a rotor-bearing systemlink

노병후; Rho, Byoung-Hoo; et al, 한국과학기술원, 2001

26
커넥팅 로드 베어링의 성능 해석에 관한 연구 = A study on the performance analysis of connecting rod bearingslink

김병직; Kim, Byung-Jik; et al, 한국과학기술원, 2001

27
틸팅패드 저어널 베어링의 성능에 대한 패드-피봇에서의 마찰의 영향 = Influence of pad-pivot friction on the performance of tilting pad journal bearinglink

김성기; Kim, Sung-Gi; et al, 한국과학기술원, 2007

28
펄라이트 강선의 기계적 특성 향상을 위한 비원형 신선 공정 설계 = Process design of a non-circular drawing sequence for improving mechanical properties of pearlitic steel wireslink

백현무; Baek, Hyun Moo; et al, 한국과학기술원, 2015

29
프로팅링 저어널베어링에 대한 연구 = A Study on the floating ring journal bearinglink

정연민; Cheong, Yeon-Min; et al, 한국과학기술원, 1992

rss_1.0 rss_2.0 atom_1.0