Browse "ME-Theses_Ph.D.(박사논문) " by Title 

Showing results 421 to 440 of 1973

421
Development of strain-smoothed polygonal finite elements and alleviation of volumetric locking in the strain-smoothed element method = 변형률 완화 다각형 유한요소 개발 및 변형률 완화 요소법에서의 체적 잠김 개선link

Jung, Hoontae; 정훈태; et al, 한국과학기술원, 2024

422
Development of structural reliability analysis methodology for prismatic pressure vessel with internal lattice structure = 내부 격자 구조를 가진 각형 압력 탱크 설계를 위한 구조 신뢰성 해석 방법 개발link

Choi, Younseok; Chang, Daejun; et al, 한국과학기술원, 2020

423
Development of the FBG force sensor for Minimally Invasive Surgery and the assessment of the efficacy of force-reflection ability = 최소 침습 수술 로봇용 FBG 힘센서의 개발 및 힘반향의 효용성 평가link

Song, Ho-Seok; 송호석; et al, 한국과학기술원, 2012

424
Development of the low temperature active magnetic regenerative refrigerator with conduction cooled high temperature superconducting magnet = 전도 냉각 고온 초전도 자석을 이용한 저온 능동형 자기 재생식 냉동기의 개발link

Park, Inmyong; Jeong, Sang Kwon; et al, 한국과학기술원, 2018

425
Development of the Low-Observable Radome Using Composite Sandwich Constructions = 복합재료 샌드위치 구조를 이용한 저탐지 레이돔 개발에 관한 연구link

Kim, Po-Chul; 김포철; et al, 한국과학기술원, 2010

426
Development of the partition of unity based solid finite elements free from the linear dependence problem = PU 기반 솔리드 유한요소의 개발link

Kim, San; Lee, Phill-Seung; et al, 한국과학기술원, 2019

427
Development of the sandwich end plate and composite bipolar plate for PEMFC stacklink

유하나; Lee, Dai Gil; et al, 2011

428
Development of the science and technology satellite ⅲ structure with composite sandwich constructions = 복합재료 샌드위치 과학기술 3호 인공위성 구조 개발link

Kim, Byoung-Jung; 김병중; et al, 한국과학기술원, 2010

429
Development of the self-sustaining integrated diesel fuel processor for hydrogen production and solid oxide fuel cell operation = 수소 생산 및 고체산화물 연료전지 운전을 위한 자립 운전형 통합 디젤 개질기 개발link

Yoon, Sang-Ho; 윤상호; et al, 한국과학기술원, 2011

430
Development of three-dimensional scaffolds containing electrospun nanofibers and their applications to tissue regeneration = 전기방사 나노섬유를 포함한 3차원 인공지지체 개발 및 조직재생으로의 적용link

Park, Suk-Hee; 박석희; et al, 한국과학기술원, 2011

431
Development of wearable sensor system including optical 3-axis force plate and its application to knee joint assist robot = 광학식 3축 포스 플레이트를 포함한 착용형 센서 시스템 개발과 무릎관절 보조 로봇에의 응용link

Kim, Ji Chul; 김지철; et al, 한국과학기술원, 2014

432
Device fabrication in printed electronics with roll-to-roll slot die coating and laser direct writing process = 롤투롤 슬롯 다이 코팅과 레이저 직접 패터닝 공정을 적용한 인쇄전자 소자 제작link

Lee, Hyung Man; 이형만; et al, 한국과학기술원, 2014

433
Diagnosis of anisotropy and asymmetry in rotating machinery via directional spectral analysis = 방향스펙트럼해석에 의한 회전체의 비등방성 및 비대칭성 진단link

Joh, Chee-Young; 조치영; et al, 한국과학기술원, 1993

434
Dielectric-piezoelectric 특성을 이용한 접착 조인트의 경화 및 reliability 모니터링에 관한 연구 = Cure and reliability monitoring for adhesively bonded joints by dielectric and piezoelectric methodlink

권재욱; Kwon, Jae-Wook; et al, 한국과학기술원, 2002

435
Diesel soot morphology, composition and nano-structure in conventional and low temperature combustion regimes = 디젤 엔진의 운전조건에 따른 입자상물질의 형상, 구성 및 구조에 대한 연구link

Rohani, Behzad; 로하니, 베자드; et al, 한국과학기술원, 2017

436
Direct imposition of the wall boundary condition in smoothed particle hydrodynamicslink

Park, Hyung–Jun; Lee, Phill-Seung; et al, 2021

437
Direct numerical simulation and PIV measurement of turbulent boundary layer over a rod-roughened wall = 표면조도가 있는 난류경계층의 직접수치모사 및 입자영상유속측정link

Lee, Seung-Hyun; 이승현; et al, 한국과학기술원, 2009

438
Direct numerical simulation of optimal Taylor-couette flow and turbulent boundary layer over a divergent convergent superhydrophobic surface = 최적 Taylor-couette 유동 및 확산수렴 초 소수성 표면을 가지는 난류경계층 유동의 직접수치모사link

Jalalabadi, Razieh; Sung, Hyung Jin; et al, 한국과학기술원, 2018

439
Direct numerical simulation of turbulent boundary layer over rough and superhydrophobic surfaces = 표면조도 및 초소수성 표면을 가지는 난류경계층 유동의 직접수치모사link

Nadeem, Muhammad; 나딤, 무함마드; et al, 한국과학기술원, 2016

440
Direct numerical simulation of turbulent boundary layers with adverse pressure gradient = 역압력구배가 있는 난류 경계층의 직접수치모사link

Lee, Joung-Ho; 이중호; et al, 한국과학기술원, 2009

rss_1.0 rss_2.0 atom_1.0