Browse "ME-Theses_Ph.D.(박사논문) " by Title 

Showing results 1721 to 1740 of 1973

1721
잡음 속에 묻힌 임펄스 소음원의 위치 추정 = Impulsive source localization in noisy environmentlink

최영철; Choi, Young-Chul; et al, 한국과학기술원, 2005

1722
재구성 가능한 능동적 영상 시스템을 이용한 마이크로MEMS 부품의 영상기반조립 = Visually guided assembly of micro MEMS parts using reconfigurable active vision systemlink

이덕영; Lee, Duk-Youn; et al, 한국과학기술원, 2010

1723
재료의 연성파단을 예측하기 위한 연속체 손상 항복 함수에 관한 연구 = A study on a continuum damage yield function to predict ductile fracture of materialslink

고윤기; Ko, Youn Ki; et al, 한국과학기술원, 2011

1724
재료조각법을 이용한 위상최적설계 = Material cloud method for topology optimizationlink

장수영; Chang, Su-Young; et al, 한국과학기술원, 2005

1725
재생형 펌프의 날개 각도에 따른 성능 변화에 관한 연구 = Study on the effect of blade angle on regenerative pump performancelink

최원철; Choi, Won-Chul; 성형진; Sung, Hyung-Jin; et al, 한국과학기술원, 2013

1726
저 가시성 환경에서 효과적인 영상 개선 방법 및 특징 추출에 관한 연구 = (A) study on effective image improvement method and feature extraction in low visibility environmentslink

김경일; 김수현; et al, 한국과학기술원, 2018

1727
저결맞음 간섭계를 이용한 다층 형상 측정 = Multiple-layered surface measurement using low-coherence interferometrylink

이창윤; Lee, Chang-Yun; et al, 한국과학기술원, 2016

1728
저결맞음 간섭계를 이용한 대구경 거친 유리 표면 형상 측정 = Large-aperture ground glass surface form measurement using low-coherence scanning interferometrylink

배은덕; Bae, Eun-Deok; et al, 한국과학기술원, 2017

1729
저결맞음 간섭계를 이용한 대면적 복잡 형상 측정 = Meso-scale complex surface measurement using low-coherence interferometrylink

유준호; You, Joon-Ho; et al, 한국과학기술원, 2008

1730
저잡음 광전류 펄스 기반 클럭 시스템 = Ultralow-noise photocurrent pulse-based clock systemslink

현민지; Hyun, Minji; et al, 한국과학기술원, 2024

1731
저주파수 흡음을 위한 헬름홀쯔 공명기 배열형 패널의 설계 방법론 = Design method of helmholtz resonator array panels for low-frequency sound absorptionlink

김상렬; Kim, Sang-Ryul; et al, 한국과학기술원, 2006

1732
저항 점용접의 공정 해석에 의한 용접부의 잔류응력과 변형에 대한 연구 = A study on residual stress and deformation of resistance spot welded structure using process analysislink

차병우; Cha, Byoung-Woo; 나석주; 송지호; et al, 한국과학기술원, 2002

1733
적층고무 면진베어링을 이용한 원자로구조물의 지진응답 감소방법에 관한 연구 = Study on laminated rubber bearing to reduce a nuclear reactor structure's seismic responseslink

유봉; Yoo, Bong; et al, 한국과학기술원, 2002

1734
적층로터 및 고감쇠 베어링의 해석과 펄스발전기의 설계 및 성능 특성에 관한 연구 = Analysis of laminated rotor and high damped bearing and study on design and performance characteristics of pulsed generatorlink

김영춘; Kim, Yeong-Chun; et al, 한국과학기술원, 2004

1735
전개성능을 고려한 태양전지판 전개장치용 테잎스프링 힌지 설계 연구 = A study on the tape spring hinge design for deployment device of satellite solar array considering deployment performanceslink

김경원; Kim, Kyung Won; et al, 한국과학기술원, 2015

1736
전기도금공정을 이용하여 제작된 전해질 기울기 센서 = Electrolytic tilt sensor fabricated by using electroplating processlink

이재형; Lee, Jae-Hyoung; et al, 한국과학기술원, 2009

1737
전기도금된 나노 결정립 니켈 박막의 인장 및 피로 거동 평가 = Evaluation of tensile and fatigue behavior of electrodeposited nanocrystalline nickel filmslink

백동천; Baek, Dong-Cheon; et al, 한국과학기술원, 2009

1738
전기력이 응집체의 형상과 성장특성에 미치는 영향에 대한 연구 = The effect of electric force on morphology and growth of aggregatelink

박형호; Park, Hyung-Ho; et al, 한국과학기술원, 2002

1739
전기수력학적 힘을 이용한 단분산 액적의 생성에 관한 연구 = Generation of monodisperse droplets by using electrohydrodynamic forcelink

김명찬; Kim, Myoung-Chan; et al, 한국과학기술원, 2003

1740
전기자동차용 변속기를 위한 새로운 방식의 클러치 기구에 대한 연구 = (A) study on the new clutch mechanism for the electric vehicle transmissionlink

박승욱; 최세범; Choi, Sei Bum; 김경웅; et al, 한국과학기술원, 2019

rss_1.0 rss_2.0 atom_1.0