Browse "ME-Theses_Ph.D.(박사논문) " by Title 

Showing results 1521 to 1540 of 1907

1521
역학일 분석을 통한 보행 메커니즘 고찰 = Study of human walking mechanism based on mechanical work analysis : young, elderly, and OA patientslink

박희원; Park, Hee Won; et al, 한국과학기술원, 2015

1522
연료 분사 전략이 대형 디젤 엔진 연소 성능에 미치는 영향 = The effect of fuel injection strategies on combustion characteristics in a heavy-duty diesel enginelink

이진우; Lee, Jin-Woo; et al, 한국과학기술원, 2011

1523
연료공급조건에 따른 고압디젤연료 분무특성 = Spray characteristics of high pressure diesel injection with regard to fuel injection equipmentslink

강진석; Kang, Jin-Suk; et al, 한국과학기술원, 2003

1524
연료분무 및 유동장에 따른 직접분사식 가솔린 엔진 특성에 관한 연구 = The interaction between fuel spray and flow in direct-injection spark ignition enginelink

최재준; Choi, Jae-Joon; et al, 한국과학기술원, 2005

1525
연삭공정에 있어서 자려진동 해석 및 임펙트 뎀퍼의 효과에 관한 연구 = A study of self-excited vibratition and impact damper in grinding processlink

김옥현; Kim, Ock-Hyun; et al, 한국과학기술원, 1983

1526
연소불안정과 교란에너지에 관한 연구 = A study on Combustion Instability and Disturbance Energylink

김현준; Kim, Hyeon Jun; et al, 한국과학기술원, 2010

1527
연속식 용융아연도금 공정에서의 단부 과도금 현상과 표면 얼룩무늬 현상을 해결하기 위한 공기역학적 연구 = Aerodynamic investigation of air knife system to resolve the edge overcoating and check mark in a continuous hot-dip galvanizing processlink

안기장; Ahn, Gi-Jang; et al, 한국과학기술원, 2006

1528
열 하중을 받고 있는 다층구조물에 대한 열 기계적 해석과 파괴역학의 적용 = Thermomechanical and fracture mechanical analysis of multilayered structure subjected to thermal loadinglink

임지혁; Lim, Ji-Hyuk; et al, 한국과학기술원, 2001

1529
열-기계적 접촉 문제의 상보성 수식화 = Formulation of thermo-mechanical contact based on complementarity relationslink

박준; Park, Jun; et al, 한국과학기술원, 1994

1530
열-점소성 유한요소법을 이용한 대형단조에서의 기공압착해석에 관한 연구 = Analysis of void crushing in the large forging using the thermo-viscoplastic finite element methodlink

박치용; Park, Chi-Yong; et al, 한국과학기술원, 1996

1531
열간 압출 공정의 평금형 설계를 위한 규칙 기반 설계 시스템 개발 = Deveopment of rule-based design system for flat die design of hot extrusion processlink

이근안; Lee, Geun-An; et al, 한국과학기술원, 2001

1532
열간압연공정의 루퍼제어시스템 개선을 위한 장력과 롤 속도 제어 퍼지 알고리즘 = Fuzzy algorithm for improvement of looper control system in hot rolling based on tension and roll speed controllink

정종엽; Jung, Jong-Yeob; et al, 한국과학기술원, 1998

1533
열성층배관 Thermal striping 영역에 존재하는 균열의 거동에 관한 연구 = A study on the behavior of a crack located at thermal striping zone in thermally stratified pipelink

이정배; Lee, Jeong-Bae; et al, 한국과학기술원, 1993

1534
열음향 진동에 관한 연구 = A study on the thermoaxoustic oscillationlink

권영필; Kwon, Young-Pil; et al, 한국과학기술원, 1986

1535
열적 기계적 하중이 작용하는 구조물의 비탄성 해석과 수명 예측 = Inelastic analysis and life prediction for structures subject to thermomechanical loadinglink

윤삼손; Yoon, Sam-Son; et al, 한국과학기술원, 2003

1536
열전달을 고려한 스크롤 압축기내의 열역학적 냉매압축과정에 대한 연구 = Study on the thermodynamic compression process of refrigerant in the scroll compressor with heat transfer effectlink

장기태; Jang, Ki-Tae; et al, 한국과학기술원, 2006

1537
열하중 조건하의 임의 곡선 균열에 대한 보존 적분에 관한 연구 = A study on a conservation integral for arbitrarily curved cracks under thermal loadinglink

정해동; Chung, Hae-Dong; et al, 한국과학기술원, 1997

1538
열화 특성이 향상된 탄소나노튜브 포화흡수체 기반의 모드동기 광섬유 레이저 및 기초 응용에 관한 연구 = Thermal degradation-resistant CNT saturable absorber for mode-locked fiber laser and basic applicationlink

강대원, 한국과학기술원, 2022

1539
영구자석 매입형 BLDC 모터의 소음/진동 평가를 위한 전자기적 가진력의 특성화 = Characterization of electromagnetic excitation forces for interior permanent magnet type BLDC motors for noise/vibration assessmentlink

고홍석; Ko, Hong-Seok; et al, 한국과학기술원, 2003

1540
영구자석동기모터의 외란 관측 기반 강인한 토크 제어 및 새로운 약자속 제어법 = Disturbance observer based robust torque control and novel flux-weakening control of permanent magnet synchronous motorlink

김용훈; 김경수; et al, 한국과학기술원, 2018

rss_1.0 rss_2.0 atom_1.0