Browse "ME-Theses_Ph.D.(박사논문) " by Title 

Showing results 1781 to 1800 of 1907

1781
추가 변형률 요소의 성능 개선에 관한 연구 = A study on improving the performance of enhanced assumed strain elementslink

여승태; Yeo, Seung-Tai; et al, 한국과학기술원, 1997

1782
축-베어링 시스템의 비선형 진동 해석 및 안정성 향상 방법에 관한 연구 = A study on nonlinear vibration analysis and improving method of stability characteristics of a rotor-bearing systemlink

노병후; Rho, Byoung-Hoo; et al, 한국과학기술원, 2001

1783
축대칭 난류 확산 화염에서의 매연 농도 및 화염 구조 예측에 관한 연구 = Predictions on the soot concentration and flame structure of the axisymmetric turbulent diffusion flameslink

정종수; Jurng, Jong-Soo; 이춘식; 신현동; et al, 한국과학기술원, 1989

1784
축대칭 물체의 3차원 접촉응력 해석 = A three dimensional contact stress analysis of axisymmetric bodieslink

박상규; Park, Sang-Gyu; et al, 한국과학기술원, 1986

1785
축류 및 혼합류 터보기계의 손실모형에 관한 연구 = A study on loss models of axial and mixed flow turbomachineslink

윤의수; Yoon, Eui-Soo; et al, 한국과학기술원, 1997

1786
축약그래프를 이용한 기구연쇄의 열거 및 형태합성에의 응용 = Enumeration of kinematic chains using contracted graphs and application to type synthesislink

이황진; Lee, Hwang-Jin; et al, 한국과학기술원, 1993

1787
축하중을 받는 표면피로균열의 진전거동에 관한 연구 = Surface crack growth behavior under axial loadinglink

김종한; Kim, Jong-Han; et al, 한국과학기술원, 1992

1788
충격파 / 난류 경계층 상호 간섭 현상의 전산 해석 = A computational study on shock-wave/turbulent-boundary-layer interaction phenomenalink

윤병국; Yoon, Byong-Kuk; et al, 한국과학기술원, 1995

1789
층류 맥동류에서의 축방향 유효확산 평가를 위한 기초적 연구 = A fundamental study of evaluation of axial effective diffusion in laminar oscillating flowlink

김명배; Kim, Myung-Bae; et al, 한국과학기술원, 1996

1790
층류 예혼합 곡면 화염의 국부 안정성 해석 = Local stability analysis of laminar premixed curved flameslink

이대근; Lee, Dae-Keun; et al, 한국과학기술원, 2004

1791
층류 확산화염에서 복사경계조건 및 레이저 가열에 따른 매연 생성 및 산화특성에 관한 실험적 연구 = An experimental study of radiation shield and laser heating on the soot formation and oxidation of diffusion flamelink

이춘범; Lee, Chun-Beom; et al, 한국과학기술원, 2005

1792
침대 장착형 복강경 수술 로봇 시스템과 포트 배치 최적화link

정덕균; 권동수; et al, 2021

1793
캠 기구의 동역학을 고려한 캠 형상 최적설계 = Optimum cam profile design considering cam-follower system dynamicslink

전혁수; Jeon, Hyuck-Soo; et al, 한국과학기술원, 1991

1794
커넥팅 로드 베어링의 성능 해석에 관한 연구 = A study on the performance analysis of connecting rod bearingslink

김병직; Kim, Byung-Jik; et al, 한국과학기술원, 2001

1795
컴퓨터 비전을 이용한 공구상태 검사 시스템 개발에 관한 연구 = A study on the development of cutting tool inspection system using computer visionlink

권오달; Kwon, Oh-Dal; et al, 한국과학기술원, 1997

1796
크리깅 근사모델과 모멘트법을 이용한 신뢰도 기반 최적설계 = Reliability Based Design Optimization Using a Kriging Metamodel and a Moment Methodlink

주병현; Ju, Byeong-Hyeon; et al, 한국과학기술원, 2008

1797
크리프 변형재료에서 손상을 고려한 모드 I 정지균열의 응력장 해석 = Analysis of the stationary mode I crack in creeping solids coupled with damagelink

김진영; Kim, Jin-Young; et al, 한국과학기술원, 2002

1798
크립조건하의 균열 발생과 진전에 관한 연구 = A study on crack initiation and propagation under creep conditionslink

최영환; Choi, Young-Hwan; et al, 한국과학기술원, 1989

1799
탄성체 내의 킹크균열과 계면밑균열 해석 = Analysis of a kink crack and a subinterface crack in an elastic solidlink

최승용; Choi, Seung-Yong; et al, 한국과학기술원, 1997

1800
탄소나노튜브 포화흡수체 모드잠금 레이저의 극초단 펄스 생성 및 응용에 관한 연구 = A study on the ultrashort pulse generation of a carbon-nanotube saturable absorber mode-locked laser and its applicationlink

권원식; Kwon, Won-Sik; et al, 한국과학기술원, 2016

rss_1.0 rss_2.0 atom_1.0