Browse "ME-Theses_Ph.D.(박사논문) " by Title 

Showing results 1881 to 1900 of 1907

1881
핵융합로 열차폐체 최적설계에 관한 연구 = (A) study on design optimization for the cryogenic thermal shieldlink

노창현; 이병채; et al, 한국과학기술원, 2020

1882
허용하중 집합과 새로운 구조물의 최적설계 수식화에 관한 연구 = Concept of allowable load set and its use for a new structural optimal design formulationlink

김재현; Kim, Jae-Hyun; et al, 한국과학기술원, 2002

1883
험로 주행을 위한 가변 형상 무한궤도형 주행 로봇에 관한 연구 = A study on variable configuration tracked mobile robot for hazardous environmentlink

이청희; Lee, Cheong-Hee; et al, 한국과학기술원, 2003

1884
험지에서의 가변 휠형 로봇 차량의 장애물 극복 알고리즘에 관한 연구 = Algorithm for obstacle negotiation of robotic vehicle with actively articulated suspension on unstructured terrainlink

임경빈; lim, Kyeong-Bin; et al, 한국과학기술원, 2012

1885
현가장치 복합 조인트를 이용한 다물체 차량 시스템의 실시간 동역학 해석 = Real-time dynamic simulation of multibody vehicle systems using suspension composite jointslink

최규재; Choi, Gyoo-Jae; et al, 한국과학기술원, 2000

1886
협동로봇을 이용한 유연 물체의 진동 감소를 위한 최적 입력 설계 = Optimal input design for a cooperating robot to reduce vibration on carrying flexible objectlink

지영춘; Ji, Young-Chun; et al, 한국과학기술원, 2000

1887
형상기억합금 선을 삽입한 복합적층 보의 좌굴거동 및 제어 = Buckling behaviour and control of a laminated composite beam with embedded shape memory alloy wireslink

최섭; Choi, Sup; et al, 한국과학기술원, 1999

1888
형상기억합금 작동기를 위한 시간지연추정 제어기의 적용 = Application of controllers with time delay estimation to an SMA actuatorlink

이효직; Lee, Hyo-Jik; et al, 한국과학기술원, 2004

1889
형상최적화를 이용한 마찰과 마멸해석 = Contact and wear analysis by shape optimization approachlink

이창원; Lee, Chang-Won; et al, 한국과학기술원, 2009

1890
호모토피법을 이용한 3차원 마찰 접촉 문제의 해석 = Three dimensional frictional contact analysis using homotopy methodlink

박재건; Park, Jae-Keon; et al, 한국과학기술원, 1994

1891
혼합 유한요소 수식화를 이용한 3차원 소성 가공 공정 해석의 국부 격자 재구성 방법 = Localized remeshing technique for three-dimensional forming simulations with a mixed finite element formulationlink

손일헌; Son, Il-Heon; et al, 한국과학기술원, 2006

1892
혼합냉매 줄톰슨 냉동기를 위한 마이크로 채널 인쇄기판형 열교환기 설계에 관한 연구 = Investigation on microchannel printed circuit heat exchanger characteristic for the mixed refrigerant Joule Thomson refrigeratorlink

백승환; Baek, Seung-Whan; et al, 한국과학기술원, 2013

1893
혼합현실 기반 공정 배치 계획을 위한 안전표지판과 레거시 시뮬레이션 데이터의 이용 = Mixed reality-based virtual layout planning using safety sign and legacy simulation datalink

이종환; Lee, Jong-Hwan; et al, 한국과학기술원, 2009

1894
화염가열을 이용한 선박구조물의 성형과 용접변형 교정에 관한 연구 = A study on flame forming and straightening of welding distortion for shipbuilding structurelink

성우제; Seong, Woo-Jae; et al, 한국과학기술원, 2012

1895
확률 상태방정식의 노이만 전개 근사화를 통한 구조물의 신뢰성 최적설계 = Reliability-based structural optimal design using the neumann expansion technique for random state equationlink

이재한; Lee, Jae-Han; et al, 한국과학기술원, 1995

1896
확산화염의 비정상 거동에 관한 연구 = An experimental study on the unsteady behavior of strained diffusion flameslink

이의주; Lee, Eui-Ju; et al, 한국과학기술원, 2000

1897
확장된 유한차분형 수치기법을 이용한 나선형 스프링 동해석 = Dynamic analysis of a helical spring using an extended finite difference-type numerical schemelink

김성훈; Kim, Sung-Hoon; et al, 한국과학기술원, 1994

1898
환경 조건에 따른 가스 터어빈 엔진의 성능 변화에 대한 연구 = Environmental effects on the gas turbine engine performanceslink

이시우; Lee, Si-Woo; et al, 한국과학기술원, 2001

1899
회전아크를 이용한 자동용접에 관한 연구 = A study on automatic welding by using rotating arclink

김철희; KIm, Cheol-Hee; et al, 한국과학기술원, 2002

1900
횡방향 진동을 이용한 벨트구동계의 정적 장력 및 동적 장력의 규명 = Identification of static and dynamic tension in belt driving systems using flexural vibrationslink

임완택; Rim, Wan-Teck; et al, 한국과학기술원, 1993

rss_1.0 rss_2.0 atom_1.0