2141 | 자장에 의한 용융금속의 대류 억제와 일방향 응고에 미치는 영향에 관한 연구 = Suppression of convection in melt by magnetic field and its effects on unidirectional solidificationlink 강만석; Kang, Man-Sug; et al, 한국과학기술원, 1993 |
2142 | 분무 적층 공정에 대한 해석적 연구 = Analysis of the spray deposition processlink 서동명; Suh, Dong-Myung; et al, 한국과학기술원, 1993 |
2143 | 인산용액내에서 백금 촉매처리된 탄소전극의 부식특성에 관한 연구 = Corrosion behaviour of platinum catalyzed carbon electrode in phosphoric acid solutionlink 류영균; Ryu, Young-Gyoon; et al, 한국과학기술원, 1993 |
2144 | Al-1wt%Si-0.5wt%Cu 합금의 대기부식에 대한 연구 = Autospheric corrosion of Al-1wt%Si-0.5wt%Cu alloylink 문성모; Moon, Sung-Mo; et al, 한국과학기술원, 1993 |
2145 | 플라즈마 화학증착법에 의해 형성된 $TiO_2$ 박막을 통한 수소투과 거동에 관한 연구 = Hydrogen permeation through the $TiO_2$ film produced by plasma enhanced chemical vapor deposition methodlink 박진우; Park, Jin-Woo; et al, 한국과학기술원, 1993 |
2146 | Al-Zn-Mg-Mn-Zr계 합금의 저주기 피로성질에 미치는 분위기의 영향 = Effect of environments on the low cycle fatigue in Al-Zn-Mg-Mn-Zr alloylink 조한서; Cho, Han-Seo; et al, 한국과학기술원, 1993 |
2147 | 7075 알루미늄 합금의 기계적 성질 개선을 위한 Mn 첨가의 영향 = Effects of manganese on improving the mechanical properties of 7075 aluminum alloylink 최이성; Choi, Yee-Seong; et al, 한국과학기술원, 1993 |
2148 | Al-Zn-Mg-Mn 합금의 저주기 피로성질에 미치는 가공열처리의 영향에 관한 연구 = A study on the effect of thermomechanical treatment on the low cycle fatigue properties in AL-Zn-Mg-Mn alloylink 이호도; Lee, Ho-Do; et al, 한국과학기술원, 1993 |
2149 | $SiC_w/2024Al$ 금속기지 복합재료의 인장 성질과 유사초소성 현상 = Tensile characteristics and high strain rate superplasticity in SiC whisker reinforced 2024Al matrix compositeslink 김희영; Kim, Hee-Young; et al, 한국과학기술원, 1993 |
2150 | 이상 스테인레스강의 σ상 형성에 미치는 W의 영향 = The influence of W on sigma phase formation in duplex stainless steelslink 김정일; Kim, Jeong-Il; et al, 한국과학기술원, 1993 |
2151 | $Nd_15Fe_{(77-x-y)}B_8Si_xAl_y$ 소결자석의 미세구조와 자기적 성질에 미치는 Si/Al 합금원소 첨가 영향 = (The) effects of Si and Al additon in the $Nd_15Fe_{(77-x-y)}B_8Si_xAl_y$ sintered magnets on the microstructure and magnetic propertieslink 최재명; Choi, Jae-Myung; et al, 한국과학기술원, 1993 |
2152 | 극저온용Fe-19Mn-(5,13)Cr-Al-0.2C-0.5Si 강에서 Al과 Cr이 상변화 및 기계적 성질에 미치는 영향 = Effects of Al and Cr on the phase transformation and mechanical properties of cryogenic Fe-19Mn-(5,13)Cr-Al-0.2C-0.5Si steelslink 조순진; Cho, Sun-Jin; et al, 한국과학기술원, 1993 |
2153 | 기계적 합금화한 ODS Ni기 초내열 합금의 재결정 거동 및 기계적 성질 = Recrystallization behaviour and mechanical properties of mechanically alloyed ODS Ni-base superalloylink 김희연; Kim, Hee-Yeoun; et al, 한국과학기술원, 1993 |
2154 | $ErCo_2$ laves 화합물에서 수소유기 비정질화에 관한 속도론적 연구 = A kinetic study on hydrogen-induced amorphization in the $ErCo_2$ laves compoundlink 용윤중; Yong, Yoon-Joong; et al, 한국과학기술원, 1993 |
2155 | 0.0-0.2) 합금의 수소화 반응특성에 미치는 excess Zr의 영향 = $MmNi_{4.5}Al_{0.5}Zr_x$ (xlink 나영상; Na, Young-Sang; et al, 한국과학기술원, 1993 |
2156 | Hot-filament 화학증착법에서 다이아몬드 합성에 미치는 산소첨가 효과에 관한 연구 = A study on the effect of oxygen addition on diamond synthesis by hot-filament chemical vapor depositionlink 정재한; Jung, Jae-Han; et al, 한국과학기술원, 1993 |
2157 | 니켈에서 탄소 원자 첨가에 의한 입계 이동 현상과 재결정 현상 = Grain boundary migration and recrystallization in nickel indeced by carbon additionlink 장태웅; Jang, Tae-Woong; et al, 한국과학기술원, 1993 |
2158 | Off-axis sputtering 방법을 이용한 $YBa_2Cu_3O{7-x}$ 박막의 증착조건 확립과 초전도 bicrystal의 제작 = Deposition of nearly single crystalline and bicrystalline $YBa_2Cu_3O{7-x}$ thin films by off-axis sputtering methodlink 신동찬; Shin, Dong-Chan; et al, 한국과학기술원, 1993 |
2159 | Plasma-activated evaporation 방법에 의해 증착된 copper phthalocyanine 박막의 구조분석 = Structural analysis of copper phthalocyanine thin films prepared by plasma-activated evaporationlink 김준태; Kim, Jun-Tae; et al, 한국과학기술원, 1992 |
2160 | 소결 알루미나의 기공율 조절과 기계적 성질 = Porosity control and mechanical properties of sintered aluminalink 김동현; Kim, Dong-Hyun; et al, 한국과학기술원, 1992 |