1661 | $(Fe_{0.06}Co_{0.94}){78}Si_4B_{18}$ 비정질 합금의 제조조건 및 Nb 첨가가 자기적 특성에 미치는 영향에 관한 영향에 관한 연구 = The effects of processing conditions and Nb addition on the magnetic properties of $(Fe_{0.06}Co_{0.94}){78}Si_4B_{18}$ amorphous alloylink 이명복; Lee, Myung-Bok; et al, 한국과학기술원, 1985 |
1662 | Lanthanum 이 첨가된 투명세라믹 strontium barium niobate $〔(Sr_{0.75}Ba_{0.25})_{5-7.5x}La_{5x}〕Nb_{10}O_{30}$ 과 물리적 성질 = Lanthanum -modified transparent strontium barium niobate $〔(Sr_{0.75}Ba_{0.25})_{5-7.5x}La_{5x}〕Nb_{10}O_{30}$ ceramics and their physical propertieslink 이상인; Lee, Sang-In; et al, 한국과학기술원, 1985 |
1663 | 대기압 가압소결에 의한 T-15 고속도강 분말의 소결에 미치는 붕산첨가의 영향 = Effect of boric acid addition on the sintering of T-15 high speed steel powder by cap processlink 이욱성; Lee, Wook-Seong; et al, 한국과학기술원, 1985 |
1664 | WC를 첨가한 철계 소결체에서 WC의 분해현상에 관한 연구 = A study on the dissolution of WC particles into iron base powder matrix during sinteringlink 류한춘; Ryu, Han-Choon; et al, 한국과학기술원, 1985 |
1665 | $Ni_3Al$ 합금에서 Boron이 기계적 성질 및 부식저항에 미치는 영향 = The effects of Boron on mechanical properties and corrosion resistance in $Ni_3Al$ alloyslink 윤기완; Yoon, Gi-Wan; 김영길; 임호빈; et al, 한국과학기술원, 1985 |
1666 | Steels 위에 titanium carbide 의 화학증착에 관한 연구 = Titanium carbide coatings on steels by chemical vapor depositionlink 윤순길; Yoon, Soon-Kil; et al, 한국과학기술원, 1985 |
1667 | $Al_2O_3$-$ZrO_2$ 계에서 미세구조의 변화가 기계적 성질에 미치는 영향 = Effect of the microstructures on the mechanical properties of $Al_2O_3$ with $ZrO_2$ dispersed phaselink 신동우; Shin, Dong-Woo; et al, 한국과학기술원, 1985 |
1668 | 열분해 카본에 함유된 Soot particle 의 형성과 기계적 성질에 미치는 영향 = A study on the formation of soot particles included in pyrolytic carbon and its effects on mechanical propertieslink 오세민; Oh, Se-Min; et al, 한국과학기술원, 1985 |
1669 | 일정 변형율 속도법에 의한 공업용 Al-Zn-Mg-Cu 합금 (AA 7075) 의 미세조직과 응력 부식 거동과의 관계에 관한 연구 = Microstructural dependence on the stress-corrosion behaviour of commercial Al-Zn-Mg-Cu alloy (AA 7075) by constant strain-rate test methodlink 서태석; Suh, Tae-Suk; et al, 한국과학기술원, 1985 |
1670 | 초고속 급냉된 Cu-Ti 계 합금의 상분해에 관한 연구 = A study on phase decomposition of rapidly solidified Cu-Ti alloyslink 유장용; Yoo, Jang-Yong; et al, 한국과학기술원, 1985 |
1671 | 방향성 규소강판에서 Forsterite coating 한 후의 자기적 성질의 변화 = The change in magnetic properties after forsterite coating in grain-oriented silicon steellink 성기숙; Sung, Gi-Suk; et al, 한국과학기술원, 1985 |
1672 | Cu-1.35Ni-0.32Si-0.036P 합금의 석출과정의 속도론적 연구 = Precipitation kinetics in a Cu-1.35Ni-0.32Si-0.036P alloylink 성태연; Seong, Tae-Yeon; 김영길; 임호빈; et al, 한국과학기술원, 1985 |
1673 | 미량합금원소 첨가및 제어압연한 Fe-30Mn-5Al-0.3C-X 합금강의 저온에서의 기계적 성질에 관한 연구 = A study on the low temperature mechanical properties of microalloyed and controlled rolled Fe-30Mn-0.3C-X alloy steellink 박이식; Park, Yee-Sik; et al, 한국과학기술원, 1985 |
1674 | GTAW, RW 방식에 의한 피복관 봉합시 발생하는 용접결함형성과 용접부성질 평가에 대한 연구 = A study on the formation of weld defects and the testing of weld qualities for tube-sealing by GTAW and RWlink 박춘호; Park, Choon-Ho; et al, 한국과학기술원, 1985 |
1675 | (A) study on the wear-enhanced hydrogen evolution of mild steel at room temperature = 상온에서 연강의 마모에 의한 수소 방출 증가 현상에 관한 연구link Baeck, Kwang-Gi; 백광기; et al, 한국과학기술원, 1985 |
1676 | Tumbling bed 에서 증착된 laminar pyrolytic carbon 의 형성기구에 대한 고찰 = A study on the deposition mechanism of laminar pyrolytic carbon deposited in the tumbling bedlink 백운승; Baek, Woon-Seung; et al, 한국과학기술원, 1985 |
1677 | AISI-304L stainless steel 모재와 용접부위의 static 및 cyclic creep 거동 = The static and cyclic creep behaviors of base and longitudinally welded AISI-304L stainless steellink 문영훈; Moon, Young-Hoon; et al, 한국과학기술원, 1985 |
1678 | 스크린-프린티드 CdS/CuxS 태양전지의 제작 및 전기적 성질에 관한 연구 = A study on the preparation and electrical properties of the screen-printed CdS/CuxS solar cellslink 박규찬; Park, Kyu-Charn; et al, 한국과학기술원, 1985 |
1679 | In, Cl이 도우핑된 CdS소결막의 전기적성질 = The electrical properties of sintered CdS layer doped In and Cllink 박수진; Park, Soo-Jin; et al, 한국과학기술원, 1985 |
1680 | 고온 및 응력하에서 Ni-base Superalloy Rene80 의 미세 조직 변화 = The microstructural changes of Ni-base Superalloy rené80 under high temperature and stresslink 박용조; Park, Yong-Jo; et al, 한국과학기술원, 1985 |