1221 | ESR 에서 용해속도가 잉고트 미세조직에 미치는 영향 = The effect of melt rate on the microstructure of ingot in the electroslag remelting processlink 서상희; Suh, Sang-Hee; et al, 한국과학기술원, 1976 |
1222 | 인장속도의 변화를 통한 강의수소취성기구에 관한 연구 = Investigation of the hydrogen embrittlement mechanism by means of variation of the strain ratelink 김윤기; Kim, Yoon-Gi; et al, 한국과학기술원, 1976 |
1223 | Cordierite 의 생성 mechanism 과 CaO, $Fe_2O_3$의 첨가가 이에 미치는 영향 = Reaction mechanism for and effect of CaO and $Fe_2O_3$ addition on the formation of cordieritelink 김윤호; Kim, Yoon-Ho; et al, 한국과학기술원, 1976 |
1224 | 저합금 강의 변태조직에 따른 인성과 수소취성 = Effect of transformation structures on the toughness and hydrogen embrittlement of low alloy steellink 김지혁; Kiehm, Ji-Hyuck; et al, 한국과학기술원, 1976 |
1225 | 수열양생조건이 슬래그와석회 혼합물의 성질에 미치는 영향 = Effect of autoclaving conditions on the properties of slag and lime mixtureslink 노갑수; No, Kab-Soo; et al, 한국과학기술원, 1976 |
1226 | Calcium hydride의 열분해에 관한 속도론적 연구 = Kinetic studies of the thermal decomposion of calcium hydridelink 김대룡; Kim, Dae-Ryong; et al, 한국과학기술원, 1976 |
1227 | Impurity contact diffusion in semiconductor = 반도체내의 불순물 접착확산link Kim, Deok-Jung; 김덕중; et al, 한국과학기술원, 1976 |
1228 | 소결크롬강의 기계적 성질에 미치는 크롬첨가량의 영향 = The effects of chromium content upon the mechanical behavior of sintered chromium steellink 김도연; Kim, Doh-Yeon; et al, 한국과학기술원, 1976 |
1229 | Lean alloys 의 耐摩耗性에 관한 硏究 = Studies on the abrasive wear resistance of the lean alloyslink 김성완; Kim, Sung-Wan; et al, 한국과학기술원, 1976 |
1230 | Fe-20 Cu 계 소결체의 성질에 미치는 성형밀도 및 소결시간의 영향에 관한 연구 = Effect of green density and sintering time on the properties of Fe-20 Cu sintered compactslink 이채우; Lee, Chae-Woo; et al, 한국과학기술원, 1975 |
1231 | Grain growth in barium ferrite = 바리움 페라이트(Barium ferrite)내의 입자성장link Cho, Kurn; 조건; et al, 한국과학기술원, 1975 |
1232 | 알카리 토속 절연자기에 관한 연구 = Study on alkaline-earth porcelainslink 주기태; Joo, Gi-Tae; et al, 한국과학기술원, 1975 |
1233 | (The) diffusion of hydrogen in pure liquid silver and silver-copper alloyslink Chin, Eog-Yong; 진억용; et al, 한국과학기술원, 1975 |
1234 | 등방성 바리움 훼라이트 자석의 성질에 미치는 소결온도 및 시간의 영향 = The effect of sintering temperature and time on properties of the isotropic barium ferrite magnetlink 박병학; Park, Byoung-Hark; et al, 한국과학기술원, 1975 |
1235 | 일방향 응고한 Al-6.6Si-0.6Mg 합금의 현미경 조직 및 기계적 성질 = Structures and mechanical properties of unidirectionally solidified Al-6.6Si-0.6Mg alloylink 박순천; Park, Soon-Chun; et al, 한국과학기술원, 1975 |
1236 | (The) diffusion of hydrogen in pure liquid copper and copper-silicon alloys = 순수 용융동 및 동 - 규소 합금 내에서의 수소 확산link Yang, Myung-Seung; 양명승; et al, 한국과학기술원, 1975 |
1237 | 90%Cu-10%Sn 소결체의 성질에 미치는 입도 분포의 영향 = Effect of powder size distribution on some properties of sintered 90%Cu-10%Snlink 이도재; Lee, Doh-Jae; et al, 한국과학기술원, 1975 |
1238 | 왕겨로부터 SiC의 제조 = Formation of silicon carbide from rice hullslink 이재선; Lee, Jai-Son; et al, 한국과학기술원, 1975 |
1239 | 바리움페라이트 영구자석에서 성분비와 소결조건에 따른 치수의 변화와 자기적 성질에 관한 연구 = The effect of chemical composition and sintering condition on dimensional changes and magnetic properties of barium ferrite permanent magnetlink 강석중; Kang, Suck-Joong; et al, 한국과학기술원, 1975 |
1240 | 냉각속도가 철-동계 소결체의 강도에 미치는 영향 = The effect of cooling rate on the strength of iron-copper sintered compactslink 강수석; Kang, Su-Sok; et al, 한국과학기술원, 1975 |