Browse "MS-Theses_Master(석사논문)" by Author Kim, Young-Gil

Showing results 1 to 55 of 55

1
20% Ni maraging 강의 기계적 성질과 석출현상에 대한 Nb 영향 = The effects of Nb on mechanical properties and precipitation behavior of 20% Ni maraging steellink

백경욱; Paik, Kyung-Wook; et al, 한국과학기술원, 1981

2
316 Stainless steel 에서 Mo 을 W 으로 치완시 부식저항과 기계적 성질에 미치는 영향 = The effects of substituting W for Mo on corrosion resistance & mechanical properties in 316 austenitic stainless steellink

유명철; Yoo, Myung-Cheol; et al, 한국과학기술원, 1983

3
(A) study on the low temperature deformation behavior of cryogenic Fe-25Mn-5Al-5Ni-0.3C steel = Fe-25Mn-5Al-5Ni-0.3C 극저온 강의 저온 변형거동에 관한 연구link

Lim, Cha-Yong; 임차용; et al, 한국과학기술원, 1988

4
(A) study on the mechanical properties and microstructures of grain refined Cu-Al-Ni shape memory alloys = 결정립 미세화시킨 Cu-Al-Ni 형상기억합금의 기계적 성질과 미세조직에 관한 연구link

Roh, Dong-Wan; 노동완; et al, 한국과학기술원, 1990

5
AISI 4340 강에서 Mo를 대체한 W이 강의 기계적 성질에 미치는 영향 = Effects of substituting W for Mo on mechanical properties in AISI 4340 steellink

박창남; Pak, Chang-Nam; et al, 한국과학기술원, 1982

6
Boron 첨가와 aluminum stoichiometry 가 $Ni_3Al$의 기계적 성질 및 응고조직에 미치는 영향 = The effect of boron addition and aluminum stoichiometry on mechanical properties and solidification sturcture in $Ni_3Al$link

강준모; Kang, Joon-Mo; 임호빈; 김영길; et al, 한국과학기술원, 1986

7
Co-free maraging 강에서 열처리가 미세조직 및 기계적 성질에 미치는 영향 = The effects of heat treatments on microstructures and mechanical properties in Co-free maraging steelslink

김교성; Kim, Gyo-Sung; 김영길; 임호빈; et al, 한국과학기술원, 1985

8
Cu-1.35Ni-0.32Si-0.036P 합금의 석출과정의 속도론적 연구 = Precipitation kinetics in a Cu-1.35Ni-0.32Si-0.036P alloylink

성태연; Seong, Tae-Yeon; 김영길; 임호빈; et al, 한국과학기술원, 1985

9
Cu-Zn 계의 열역학적 성질 및 order parameter 의 조성 및 온도 의존성에 관한 연구 = Composition and temperature dependence of thermodynamic properties and order parameter in Cu-Zn systemlink

이종석; Lee, Jong-Seog; 김영길; 임호빈; et al, 한국과학기술원, 1985

10
Cu-Zn-Al 계 형상기억 합금의 상변태 및 기계적성질에 관한 연구 = Phase transition and mechanical property of Cu-Zn-Al shape memory alloylink

한연수; Han, Yon-Su; et al, 한국과학기술원, 1984

11
Cu-Zn-Al 및 Cu-Zn-Al-Mn 형상기억합금에서 열처리가 martensite 변태온도에 미치는 영향 = The effect of heat treatment on martensitic transformation temperature in Cu-Zn-Al and Cu-Zn-Al-Mn shape memory alloyslink

이언식; Lee, Eon-Sik; et al, 한국과학기술원, 1987

12
Cu-Zn-Al 합금의 형상기억 효과와 의탄성에 대한 연구 = Shape memory effect and superelastcity in Cu-Zn-Al alloylink

최호; Choi, Ho; et al, 한국과학기술원, 1983

13
Cu-Zn-Al-X 합금에서 저온소둔이 스프링특성에 미치는 영향과 동적 변형시효현상에 대한 고찰 = Effect of low-temperature annealing on the spring characteristics and inspection of the dynamic strain aging behavior in Cu-Zn-Al-X alloyslink

조태제; Cho, Tae-Je; et al, 한국과학기술원, 1989

14
Cu가 도우핑된 CdS 소결막의 전기적 성질 = Electrical properties of Cu-doped CdS sintered filmslink

문주태; Moon, Joo-Tae; 임호빈; 김영길; et al, 한국과학기술원, 1986

15
Effects of Cr on the shape memory effect and tensile properties of Fe-Mn-Si shape memery alloy = Fe-Mn-Si 합금의 형상 기억 효과 및 인장 성질에 미치는 Cr의 영향link

Yang, Jung-Pil; 양정필; et al, 한국과학기술원, 1989

16
Fe-26.5 at.%Al 금속간 화합물의 기계적 성질과 미세 조직에 미치는 Cr과 W의 효과 = The effects of Cr and W on mechanical properties and microstructures of Fe-26.5 at%Al intermetallic compoundlink

최이천; Choi, Yi-Chun; et al, 한국과학기술원, 1991

17
Fe-Ni-Cr-W-Al-Ti 계 stainless maraging강에서 합금원소 및 열처리 조건이 시효 kinetic과 미세 조직에 미치는 영향 = Effects of alloying elements and heat treatments on aging kinetics and microstructure in Fe-Ni-Cr-W-Al-Ti stainless maraging steelslink

우병성; Woo, Byeong-Seong; et al, 한국과학기술원, 1990

18
Fe-Ni-W-Ti-Al 계 마르에이징강에서 냉간가공이 기계적 성질과 석출 및 변태거동에 미치는 영향 = The effects of cold working on the mechanical properties and precipitation, transformation behavior in Fe-Ni-W-Ti-Al maraging steellink

이정훈; Lee, Jung-Hoon; et al, 한국과학기술원, 1991

19
LBIC 법에 의한 다결정 규소태양 전지의 입계면 재결합 속도 산출 = The determination of grain boundary recombination velocity by light-beam induced-current technique in polycrystalline silicon solar celllink

최병호; Choi, Byung-Ho; 임호빈; 김영길; et al, 한국과학기술원, 1986

20
MA 6000의 횡방향 기계적 성질 및 미세 조직에 미치는 Hf 첨가 효과에 관한 연구 = The effects of Hf addition on the transverse mechanical properties and microstructures of MA 6000link

이주협; Lee, Ju-Hyeob; et al, 한국과학기술원, 1991

21
Maraging 강에서 Mo를 W 으로 대체시 강의 기계적 성질에 미치는 영향 = The effects of substituting W for Mo on mechanical properties in maraging steellink

이덕락; Lee, Duck-Rack; et al, 한국과학기술원, 1984

22
Mo와 W이 Fe-22Cr-5.5Ni-0.15N 이상 스테인레스강의 취성 및 부식 저항에 미치는 영향 = Effects of Mo and W on embrittlement and corrosion resistance in Fe-22Cr-5.5Ni-0.15N duplex stainless steelslink

이은배; Lee, Eun-Bae; et al, 한국과학기술원, 1994

23
Nd-Fe-B 계 영구 자석에서 W 함량이 미시구조와 자기적 성질에 미치는 영향 = The effects of W content on hard magnetic properties and microstructure of Nd-Fe-B permanent magnetlink

피승호; Pi, Seung-Ho; et al, 한국과학기술원, 1991

24
$Nd_15Fe_{(77-x-y)}B_8Si_xAl_y$ 소결자석의 미세구조와 자기적 성질에 미치는 Si/Al 합금원소 첨가 영향 = (The) effects of Si and Al additon in the $Nd_15Fe_{(77-x-y)}B_8Si_xAl_y$ sintered magnets on the microstructure and magnetic propertieslink

최재명; Choi, Jae-Myung; et al, 한국과학기술원, 1993

25
$Nd_{15-x}Dy_xFe_{77}B_8$ 소결자석의 자기 특성에 미치는 Dy 함량과 열처리 조건의 영향 = The effect of Dy content and heat-treatment condition on the magnetic properties of sintered $Nd_{15-x}Dy_xFe_{77}B_8$ magnetlink

김영표; Kim, Young-Pyo; et al, 한국과학기술원, 1992

26
$Ni_3Al$ 합금에서 Boron이 기계적 성질 및 부식저항에 미치는 영향 = The effects of Boron on mechanical properties and corrosion resistance in $Ni_3Al$ alloyslink

윤기완; Yoon, Gi-Wan; 김영길; 임호빈; et al, 한국과학기술원, 1985

27
Precipitation behavior of high strength high electrical conductivity Cu-Ni-Si-P alloys = 고강도.고전기전도도 Cu-Ni-Si-P 합금의 석출현상에 대한 연구link

Han, Jae-Heon; 한재헌; et al, 한국과학기술원, 1984

28
$SiC_w/2024Al$ 금속기지 복합재료의 인장 성질과 유사초소성 현상 = Tensile characteristics and high strain rate superplasticity in SiC whisker reinforced 2024Al matrix compositeslink

김희영; Kim, Hee-Young; et al, 한국과학기술원, 1993

29
Stainless Fe-Cr-Ni-W maraging 강에서 W 함량과 열처리가 미세조직 및 기계적 성질에 미치는 영향 = The effects of W-contents and heat treatments on microstructure and mechanical properties in stainless Fe-Cr-Ni-W maraging steelslink

석진익; Suk, Jin-Ik; et al, 한국과학기술원, 1989

30
Superalloy 재결정에 미치는 segregate alloying elements 의 효과 = The Influence of segregate alloying elements on the recrystallization of an superalloy - alloy 92link

이상원; Lee, Sang-Won; et al, 한국과학기술원, 1992

31
Ti 을 첨가한 내후성 고장력강 개발에 관한 연구 = Alloy development of Ti-containing HSLA weathering steellink

김신용; Kim, Shin-Yong; et al, 한국과학기술원, 1983

32
Ti을 첨가한 극저탄소강에서 열처리 및 미세 합금 원소가 집합조직과 재결정 거동에 미치는 영향 = The effects of microalloying elements and continuous annealing treatment on the texture and recrystallization behavior in Ti-stabilized ultra-low carbon steelslink

박재성; Park, Jae-Sung; et al, 한국과학기술원, 1991

33
W 및 Mo 함유 고장력 합금강의 저싸이클 피로성질 (U.S. Steel "T-1" alloy) = Low cycle fatigue behavior of W and Mo containing high strength alloy steel (U.S.Steel "T-1" alloy)link

정한섭; Chung, Han-Sub; et al, 한국과학기술원, 1982

34
W-250 maraging강에서 Ti 함량과 열처리가 기계적 성질, 미세조직 및 시효거동에 미치는 영향 = The effects of Ti and heat treatment on mechanical properties, microstructure, and aging behavior in W-250 maraging steelslink

정재영; Jung, Jae-Young; et al, 한국과학기술원, 1988

35
강 중 유화물의 형상이 충격특성의 이방성 및 천이온도에 미치는 영향 = The effect of sulfide morphology on the anisotropy of impact properties and transition temperature in hot rolled steelslink

박종우; Park, Jong-Woo; et al, 한국과학기술원, 1984

36
고 망간 오스테나이트계 Fe-Mn 합금에서 열처리와 망간함량이 입계편석 및 기계적 성질에 미치는 영향 = The effects of heat treatments and Mn contents on grain boundary segregation and mechanical properties in high manganese austenitic Fe-Mn alloyslink

한충수; Han, Chung-Soo; et al, 한국과학기술원, 1990

37
고강도-고전도성 Cu-Ni-Si-X 계 합금에서의 석출거동에 대한 연구 = The investigation of precipitation behavior in high strength-high conductivity Cu-Ni-Si-X alloyslink

박봉림; Park, Bong-Lim; et al, 한국과학기술원, 1991

38
균질화 열처리가 Boron 규소강판에 미치는 영향 = Effects of normalizing in boron silicon-ironlink

이희균; Lee, Hee-Kyoun; et al, 한국과학기술원, 1983

39
극저온용 Fe-30Mn-Al-Cr-0.15C 강에서 Al과 Cr이 미세조직 및 기계적 성질에 미치는 영향 = Effects of Al and Cr on the microstructure and mechanical properties of cryogenic Fe-30Mn-Al-Cr-0.15C steelslink

오방원; Ohr, Bang-Weon; et al, 한국과학기술원, 1987

40
극저온용Fe-19Mn-(5,13)Cr-Al-0.2C-0.5Si 강에서 Al과 Cr이 상변화 및 기계적 성질에 미치는 영향 = Effects of Al and Cr on the phase transformation and mechanical properties of cryogenic Fe-19Mn-(5,13)Cr-Al-0.2C-0.5Si steelslink

조순진; Cho, Sun-Jin; et al, 한국과학기술원, 1993

41
극한지 송유관용 저탄소 고장력강 개발에 관한 연구 = Development of a low carbon-manganese HSLA steel for arctic linepipe applicationslink

김태웅; Kim, Tai-Ung; et al, 한국과학기술원, 1985

42
기계적 합금화한 ODS Ni 초내열 합금의 2차 재결정 거동에 대한 연구 = A study on the secondary recrystallization behaviour of mechanically alloyed ODS Ni-base superalloylink

김상범; Kim, Sang-Beom; et al, 한국과학기술원, 1994

43
기계적 합금화한 ODS Ni기 초내열 합금의 재결정 거동 및 기계적 성질 = Recrystallization behaviour and mechanical properties of mechanically alloyed ODS Ni-base superalloylink

김희연; Kim, Hee-Yeoun; et al, 한국과학기술원, 1993

44
내후성강 (USS COR-TEN C Steel)에서 V 을 Ti 으로 치환할 경우 강의 기계적 성질에 미치는 영향 = The effects of substituting Ti for V on mechanical properties in a weathering type HSLA steel (USS COR-TEN C steel)link

한종만; Han, Jong-Man; et al, 한국과학기술원, 1982

45
냉간 압연된 Cu-Ni-Si-P-Mg 리드프레임용 합금의 기계적 성질의 이방성과 Tension Levelling 처리시 격자 변형의 변화에 대한 연구 = A study on the anisotropy of mechanical properties and the change of lattice distortion with tension levelling treatment in cold rolled Cu-Ni-Si-P-Mg leadframe alloylink

진영훈; Chin, Young-Hoon; et al, 한국과학기술원, 1994

46
니켈기 초내열 합금에서 미세조직과 고온 기계적 성질에 미치는 코발트의 영향 = The effects of cobalt on microstructure and high temperature mechanical properties in a nickel base superalloylink

홍성현; Hong, Sung-Hyeon; et al, 한국과학기술원, 1987

47
미량합금원소 첨가및 제어압연한 Fe-30Mn-5Al-0.3C-X 합금강의 저온에서의 기계적 성질에 관한 연구 = A study on the low temperature mechanical properties of microalloyed and controlled rolled Fe-30Mn-0.3C-X alloy steellink

박이식; Park, Yee-Sik; et al, 한국과학기술원, 1985

48
산화물 분산 및 석출 강화된 니켈기 초내열합금에서의 γ'-석출물의 조대화 현상에 관한 연구 = A study on morphological changes of γ'-precipitates in oxide dispersion plus gamma prime strengthened Ni-base superalloyslink

김진수; Kim, Jin-Su; et al, 한국과학기술원, 1995

49
알루미나계에서의 화학적 불안정성에 의한 계면 이동 현상 = Chemically induced interface migration in the alumina systemlink

이호용; Lee, Ho-Yong; et al, 한국과학기술원, 1989

50
열처리 조건이 기계적 합금화한 ODS Ni기 초내열합금의 2차 재결정 거동에 미치는 영향 = The influence of heat treatment condition on the secondary recrystallization behavior in mechanically alloyed ODS Ni-base superalloylink

박이주; Park, Lee-Ju; et al, 한국과학기술원, 1992

51
오스테나이트계 Fe-25Mn-Al-C 합금에서 Al과 C가 기계적 성질 및 진동감쇠 특성에 미치는 영향 = Effects of Al and C on mechanical properties and damping characteristic of austenitic Fe-25Mn-Al-C alloyslink

허환; Heo, Hwan; et al, 한국과학기술원, 1994

52
이상 스테인레스강의 σ상 형성에 미치는 W의 영향 = The influence of W on sigma phase formation in duplex stainless steelslink

김정일; Kim, Jeong-Il; et al, 한국과학기술원, 1993

53
초저온 재료용 오스테나이트계 Fe-30Mn-5Al-0.3C-X 합금의 기계적 성질 = Mechanical properties of austenitic Fe-30Mn-5Al-0.3C-X alloys for cryogenic servicelink

한재광; Han, Jae-Kwang; et al, 한국과학기술원, 1983

54
초저온용 Fe-30Mn-5Al-0.3C-0.1Nb 합금강의 저온인장성질에 미치는 Al 조성의 영향 및 용접성에 관한 연구 = A study on effect of aluminum content on low temperature tensile properties and weldability of cryogenic Fe-30Mn-5Al-0.3C-0.1Nb steellink

이은우; Lee, Eun-Woo; 임호빈; 김영길; et al, 한국과학기술원, 1986

55
컨넥터용 Cu-2.5Ni-0.5Si-X 합금의 석출 특성과 기계적 정질에 미치는 합금원소 Mg와 P의 영향에 대한 연구 = A study on the effects of Mg and P additions on the precipitation characteristic and mechanical properties in Cu-2.5Ni-0.5Si-X alloys for connector applicationslink

서준원; Suh, Jun-Won; et al, 한국과학기술원, 1995

rss_1.0 rss_2.0 atom_1.0