Browse "MS-Theses_Master(석사논문)" by Issue Date 

Jump to a point in the index:

Showing results 1 to 20 of 2170

1
(The) diffusion of hydrogen in pure liquid silver and silver-copper alloyslink

Chin, Eog-Yong; 진억용; et al, 한국과학기술원, 1975

2
냉각속도가 철-동계 소결체의 강도에 미치는 영향 = The effect of cooling rate on the strength of iron-copper sintered compactslink

강수석; Kang, Su-Sok; et al, 한국과학기술원, 1975

3
일방향 응고한 Al-6.6Si-0.6Mg 합금의 현미경 조직 및 기계적 성질 = Structures and mechanical properties of unidirectionally solidified Al-6.6Si-0.6Mg alloylink

박순천; Park, Soon-Chun; et al, 한국과학기술원, 1975

4
(The) diffusion of hydrogen in pure liquid copper and copper-silicon alloys = 순수 용융동 및 동 - 규소 합금 내에서의 수소 확산link

Yang, Myung-Seung; 양명승; et al, 한국과학기술원, 1975

5
Grain growth in barium ferrite = 바리움 페라이트(Barium ferrite)내의 입자성장link

Cho, Kurn; 조건; et al, 한국과학기술원, 1975

6
알카리 토속 절연자기에 관한 연구 = Study on alkaline-earth porcelainslink

주기태; Joo, Gi-Tae; et al, 한국과학기술원, 1975

7
열처리가 Cu-ferrite 와 CuZn-ferrite curie temperature 에 미치는 영향 = The effect of heat treatment on the curie temperature of copper ferrite and copper zinc ferritelink

권오종; Kwon, O-Jong; et al, 한국과학기술원, 1975

8
왕겨로부터 SiC의 제조 = Formation of silicon carbide from rice hullslink

이재선; Lee, Jai-Son; et al, 한국과학기술원, 1975

9
90%Cu-10%Sn 소결체의 성질에 미치는 입도 분포의 영향 = Effect of powder size distribution on some properties of sintered 90%Cu-10%Snlink

이도재; Lee, Doh-Jae; et al, 한국과학기술원, 1975

10
바리움페라이트 영구자석에서 성분비와 소결조건에 따른 치수의 변화와 자기적 성질에 관한 연구 = The effect of chemical composition and sintering condition on dimensional changes and magnetic properties of barium ferrite permanent magnetlink

강석중; Kang, Suck-Joong; et al, 한국과학기술원, 1975

11
Austenite 高Mn鋼의 耐磨耗性에 관한 硏究 = Studies on the abrasive wear resistance of the austenitic high manganese steellink

권식철; Kwon, Sik-Chol; et al, 한국과학기술원, 1975

12
Fe-20 Cu 계 소결체의 성질에 미치는 성형밀도 및 소결시간의 영향에 관한 연구 = Effect of green density and sintering time on the properties of Fe-20 Cu sintered compactslink

이채우; Lee, Chae-Woo; et al, 한국과학기술원, 1975

13
등방성 바리움 훼라이트 자석의 성질에 미치는 소결온도 및 시간의 영향 = The effect of sintering temperature and time on properties of the isotropic barium ferrite magnetlink

박병학; Park, Byoung-Hark; et al, 한국과학기술원, 1975

14
Preferred orientations and microstructures of chromium electrodeposits = 크롬電着層의 優先配向과 顯微鏡組織link

Park, Jeong-Real; 박정렬; et al, 한국과학기술원, 1976

15
Lean alloys 의 耐摩耗性에 관한 硏究 = Studies on the abrasive wear resistance of the lean alloyslink

김성완; Kim, Sung-Wan; et al, 한국과학기술원, 1976

16
(The) effect of iron addition on the microstructures and mechanical properties of Cu-11.0% Al alloy = Cu-11.0% Al합금에의 철 첨가가 현미 경조직과 기계적 성질에 미치는 영향link

Yeum, Kook-Sun; 염국선; et al, 한국과학기술원, 1976

17
저합금 강의 변태조직에 따른 인성과 수소취성 = Effect of transformation structures on the toughness and hydrogen embrittlement of low alloy steellink

김지혁; Kiehm, Ji-Hyuck; et al, 한국과학기술원, 1976

18
$CuCl_2$촉매하에서 규소와 염화수소의 반응에 의한 trichlorosilane 의 생성 = The preparation of trichlorosilane from the cupric chloride-catalyzed reaction of silicon and hydrogen chloridelink

이임열; Lee, Rhim-Youl; et al, 한국과학기술원, 1976

19
W-Ni-Fe 의 고밀도 소결합금에 있어서 텅그스텐 분말의 크기, 성분 및 소결온도가 밀도와 기계적 성질에 미치는 영향 = The effects of tungsten power size, composition and sintering temperature on properties of W-Ni-Fe heavy alloylink

양성근; Yang, Sung-Keun; et al, 한국과학기술원, 1976

20
슬래그 입도가 슬래그 혼합물의 결정화와 기포형성에 미치는 영향 = The effects of the slag particle size on the crystallization and the foam-formation in slag-contained batchlink

박기형; Park, Kee-Hyung; et al, 한국과학기술원, 1976

rss_1.0 rss_2.0 atom_1.0