Novel fabrication technique of hybrid structure lens array for 3D images

Cited 0 time in webofscience Cited 0 time in scopus
  • Hit : 210
  • Download : 0
DC FieldValueLanguage
dc.contributor.authorLee, Junsikko
dc.contributor.authorKim, Junohko
dc.contributor.authorKim, Cheol Joongko
dc.contributor.authorShin, Dooseubko
dc.contributor.authorKoo, Gyohyunko
dc.contributor.authorWon, Yong Hyubko
dc.date.accessioned2017-01-03T06:31:29Z-
dc.date.available2017-01-03T06:31:29Z-
dc.date.created2016-11-22-
dc.date.created2016-11-22-
dc.date.issued2016-02-13-
dc.identifier.citationSPIE Photonics West 2016-
dc.identifier.urihttp://hdl.handle.net/10203/215383-
dc.description.abstractTunable liquid lens arrays can produce three dimensional images by using electrowetting principle that alters surface tensions by applying voltage. This method has advantages of fast response time and low power consumption. However, it is challenging to fabricate a high fill factor liquid lens array and operate three dimensional images which demand high diopter. This study describes a hybrid structure lens array which has not only a liquid lens array but a solid lens array. A concave-shape lens array is unavoidable when using only the liquid lens array and some voltages are needed to make the lens flat. By placing the solid lens array on the liquid lens array, initial diopter can be positive. To fabricate the hybrid structure lens array, a conventional lithographic process in semiconductor manufacturing is needed. A negative photoresist SU-8 was used as chamber master molds. PDMS and UV adhesive replica molding are done sequentially. Two immiscible liquids, DI water and dodecane, are injected in the fabricated chamber, followed by sealing. The fabricated structure has a 20 by 20 pattern of cylindrical shaped circle array and the aperture size of each lens is 1mm. The thickness of the overall hybrid structure is about 2.8mm. Hybrid structure lens array has many advantages. Solid lens array has almost 100% fill factor and allow high efficiency. Diopter can be increased by more than 200 and negative diopter can be shifted to the positive region. This experiment showed several properties of the hybrid structure and demonstrated its superiority. © (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.-
dc.languageEnglish-
dc.publisherSPIE-
dc.titleNovel fabrication technique of hybrid structure lens array for 3D images-
dc.typeConference-
dc.identifier.wosid000383391400019-
dc.identifier.scopusid2-s2.0-84987619376-
dc.type.rimsCONF-
dc.citation.publicationnameSPIE Photonics West 2016-
dc.identifier.conferencecountryUS-
dc.identifier.conferencelocationThe Moscone Center, San Francisco, CA-
dc.identifier.doi10.1117/12.2210765-
dc.contributor.localauthorWon, Yong Hyub-
dc.contributor.nonIdAuthorLee, Junsik-
dc.contributor.nonIdAuthorShin, Dooseub-
dc.contributor.nonIdAuthorKoo, Gyohyun-
Appears in Collection
EE-Conference Papers(학술회의논문)
Files in This Item
There are no files associated with this item.

qr_code

  • mendeley

    citeulike


rss_1.0 rss_2.0 atom_1.0