Browse "School of Mechanical and Aerospace Engineering(기계항공공학부)" by Subject PART II

Showing results 1 to 14 of 14

1
A new approach for fracture prediction considering general anisotropy of metal sheets

Park, Namsu; Stoughton, Thomas B.; Yoon, Jeong Whan, INTERNATIONAL JOURNAL OF PLASTICITY, v.124, pp.199 - 225, 2020-01

2
A non-associated constitutive model with mixed iso-kinematic hardening for finite element simulation of sheet metal forming

Taherizadeh, Aboozar; Green, Daniel E.; Ghaei, Abbas; Yoon, Jeong-Whan, INTERNATIONAL JOURNAL OF PLASTICITY, v.26, no.2, pp.288 - 309, 2010-02

3
Adaptive refinement of all-hexahedral elements for three-dimensional metal forming analysis

Park, CH; Yang, Dong-Yol, FINITE ELEMENTS IN ANALYSIS AND DESIGN, v.43, pp.22 - 35, 2006-11

4
Design sensitivity analysis for transient response of non-viscously damped dynamic systems

Yun, Kyeong-Soo; Youn, Sung-Kie, STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION, v.55, no.6, pp.2197 - 2210, 2017-06

5
Earing predictions for strongly textured aluminum sheets

Yoon, Jong-Hun; Cazacu, Oana; Yoon, Jeong Whan; Dick, Robert E., INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, v.52, no.12, pp.1563 - 1578, 2010-12

6
Effect of titanium nitride inclusions on the mechanical properties of direct laser deposited Inconel 718

Lim, Kwang-Hyeok; Ryou, Ken Hee; Choi, Jae Hoon; Choi, Gwanghyo; Choi, Wonseok; Lee, Jeong Hwan; Oh, Chang-Seok; et al, EXTREME MECHANICS LETTERS, v.61, 2023-06

7
Evaluation of advanced anisotropic models with mixed hardening for general associated and non-associated flow metal plasticity

Taherizadeh, Aboozar; Green, Daniel E.; Yoon, Jeong Whan, INTERNATIONAL JOURNAL OF PLASTICITY, v.27, no.11, pp.1781 - 1802, 2011-11

8
Flow boiling heat transfer characteristics of R123 and R134a in a micro-channel

Sehwan In; Jeong, Sangkwon, INTERNATIONAL JOURNAL OF MULTIPHASE FLOW, v.35, no.11, pp.987 - 1000, 2009-11

9
In situ strain and temperature monitoring of adaptive composite materials

Yoon, Hyuk-Jin; Costantini, DM; Limberger, HG; Salathe, RP; Kim, Chun-Gon; Michaud, V, JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, v.17, no.12, pp.1059 - 1067, 2006-12

10
Investigation of Wake Effects on Aeroelastic Responses of Horizontal-Axis Wind-Turbines

Jeong, Min Soo; Kim, Sangwoo; Lee, In; Yoo, Seung-Jae; Park, Kwang Chun, AIAA JOURNAL, v.52, no.6, pp.1133 - 1144, 2014-06

11
MLS (moving least square)-based finite elements for three-dimensional nonmatching meshes and adaptive mesh refinement

Lim, Jae Hyuk; Im, Seyoung; Cho, Young-Sam, COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING, v.196, no.17-20, pp.2216 - 2228, 2007

12
Plastic anisotropy and failure in thin metal: Material characterization and fracture prediction with an advanced constitutive model and polar EPS (effective plastic strain) fracture diagram for AA 3014-H19

Dick, Robert E.; Yoon, Jeong Whan, INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, v.151, pp.195 - 213, 2018-10

13
Prediction of the effects of hardening and texture heterogeneities by finite element analysis based on the Taylor model

Jung, Kyung-Hwan; Kim, Dong-Kyu; Im, Yong-Taek; Lee, Yong-Shin, INTERNATIONAL JOURNAL OF PLASTICITY, v.42, pp.120 - 140, 2013-03

14
Tetrahedral mesh generation based on advancing front technique and optimization scheme

Choi, WY; Kwak, DY; Son, IH; Im, Yong-Taek, INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, v.58, no.12, pp.1857 - 1872, 2003-11

rss_1.0 rss_2.0 atom_1.0