Showing results 8781 to 8800 of 15799
Optimal design of composite hood with reinforcing ribs through stiffness analysis Kwak, DY; Jeong, JH; Cheon, JS; Im, Yong-Taek, COMPOSITE STRUCTURES, v.38, no.1-4, pp.351 - 359, 1997-05 |
Optimal design of composite stiffened panel with cohesive elements using micro-genetic algorithm Kim, Soohyun; Kim, Chun-Gon, JOURNAL OF COMPOSITE MATERIALS, v.42, no.21, pp.2259 - 2273, 2008-11 |
Optimal Design of Composite Stiffened Panel with Cohesive Elements using Micro-Genetic Algorithm Kim, Soo-Hyun; Kim, Chun-Gon, Journal of Composite Materials, Vol..42, No.21, pp.2259-2274, 2008 |
Optimal design of experiments for optimization-based model calibration using Fisher information matrix Jung, Yongsu; Lee, Ikjin, RELIABILITY ENGINEERING & SYSTEM SAFETY, v.216, pp.107968, 2021-12 |
Optimal design of filament wound structures under internal pressure based on the semi-geodesic path algorithm Kim, CU; Kang, JH; Hong, Chang Sun; Kim, Chun-Gon, COMPOSITE STRUCTURES, v.67, no.4, pp.443 - 452, 2005-03 |
Optimal design of filament wound type 3 tanks under internal pressure using a modified genetic algorithm Kim, CU; Hong, Chang Sun; Kim, Chun-Gon; Kim, JY, COMPOSITE STRUCTURES, v.71, no.1, pp.16 - 25, 2005-10 |
Optimal design of high precision XY-scanner with nanometer-level resolution and millimeter-level working range Kang, Dongwoo; Kim, Kihyun; Kim, Dongmin; Shim, Jongyoup; Gweon, Dae-Gab; Jeong, Jaehwa, MECHATRONICS, v.19, no.4, pp.562 - 570, 2009-06 |
Optimal Design of Planar Three Degree of Freedom Redundant Manipulator Using Iterative Orthogonal Array Based Optimization kim kk; Yoon, Yong-San, SME TRANSACTIONS ON ROBOTICS RESEARCH, v.2, no.6, pp.1 - 20, 1992 |
Optimal design of rotary-type voice coil motor using multisegmented magnet array for small form factor optical disk drive Jeong, Jaehwa; Gweon, Dae-Gab, JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS BRIEF COMMUNICATIONS & REVIEW PAPERS, v.46, no.5A, pp.2912 - 2914, 2007-05 |
Optimal Design of Scara Type Robot Arm Section for Minimum Cycle Time Kim, Soohyun, MECHANICS IN DESIGN, pp.373 - 387, 1996 |
Optimal design of the adhesively-bonded tubular single lap joint Lee, SJ; Lee, Dai Gil, JOURNAL OF ADHESION, v.50, no.2-3, pp.165 - 180, 1995 |
Optimal design of the exhaust system layout to suppress the discharge noise from an idling engine Ih, Jeong-Guon; Choi, C. -Y.; Kim, T. -K.; Jang, S. -H.; Kim, H. -J., INTERNATIONAL JOURNAL OF AUTOMOTIVE TECHNOLOGY, v.12, no.4, pp.617 - 630, 2011-08 |
Optimal design of the press fit joint for a hybrid aluminum/composite drive shaft Kim, HS; Lee, Dai Gil, COMPOSITE STRUCTURES, v.70, no.1, pp.33 - 47, 2005-08 |
Optimal design of the pulse tube refrigerator with slit-type heat exchangers Ki, Tae Kyung; Jeong, Sangkwon, CRYOGENICS, v.50, pp.608 - 614, 2010-09 |
Optimal design of thrust bearing for high-speed composite air spindles Kyung Geun Bang; Hui Yun Hwang; Lee, Dai Gil, INTERNATIONAL JOURNAL OF MECHANICS AND MATERIALS IN DESIGN, v.1/2, pp.173 - 197, 2004-06 |
Optimal design of voice coil motor for micro stage Jeong, Jae Heon; Kim, Myeong Hyeon; Woo, Siwoong; Gweon, Dae-Gab; Hong,Dongpyo, Applied Mechanics and Materials, v.607, pp.507 - 510, 2014-07 |
Optimal Dynamic Design of Anthropomorphic Robot Module with Redundant Actuators Sang Heon Lee; Byung-Ju Yi; Yoon Keun Kwak, 대한기계학회 영문 논문집, v.10, no.3, pp.265 - 276, 1996 |
OPTIMAL EARTH ESCAPE TRAJECTORY USING CONTINUATION METHOD AND COSTATE ESTIMATOR Lee, Donghun; Bang, Hyochoong, American Astronomical Society Meeting, 2008-01 |
Optimal Earth-Moon Trajectory Design Using New Initial Costate Estimation Method Lee, Donghun; Bang, Hyochoong; Kim, Hae-Dong, JOURNAL OF GUIDANCE CONTROL AND DYNAMICS, v.35, no.5, pp.1671 - 1676, 2012-09 |
Optimal Encirclement Guidance Li, Hongyan; He, Shaoming; Wang, Jiang; Lee, Chang-Hun, IEEE TRANSACTIONS ON AEROSPACE AND ELECTRONIC SYSTEMS, v.58, no.5, pp.4327 - 4341, 2022-10 |
Discover