Showing results 26981 to 27000 of 47490
Study on the carbon felt electrods with conductrive coating for nanadium redox flow batteries Jeong, Kwang Il; Kim, Seong Su, 21th International Conference on Composite Structures, ICCS, 2018-09-05 |
Study on the catalytic decomposition of $N_2O$ to develop monopropellant thruster = 단일 추진제 추력기 개발을 위한 $N_2O$ 촉매 분해 특성 및 성능 평가link Kosdauletov, Assylkhan; Kwon, Se-Jn; et al, 한국과학기술원, 2011 |
Study on the catalytic decomposition of $N_2O$ to develop monopropellant thruster = 단일 추진제 추력기 개발을 위한 $N_2O$ 촉매 분해 특성 및 성능 평가link Kosdauletov, Assylkhan; Kwon, Se-Jn; et al, 한국과학기술원, 2011 |
Study on the cathode delamination of solid oxide fuel cell 박광진; 배중면, KSNRE 2009 Annual Fall conference, KSNRE, 2009-11 |
Study on the channel layout of pulsating heat pipe with orientation-independent performance under a localized heating condition = 국소 발열 조건에서 방향에 무관한 열성능을 가지는 진동형 히트파이프의 채널 구조에 관한 연구link Cho, Jeongwon; Kim, Sung Jin; et al, 한국과학기술원, 2023 |
Study on the characteristics of magneto-electrolytic-abrasive polishing by using the newly developed nonwoven-abrasive pads Kim, Jeong-Du; Xu, YM; Kang, YH, INTERNATIONAL JOURNAL OF MACHINE TOOLS MANUFACTURE, v.38, no.9, pp.1031 - 1043, 1998-09 |
Study on the characterization of the dynamic material properties of sheet metal for auto-body considering the pre-strain effect Kim, Seokbong; Lim, Jiho; Huh, Hoon, proc. KSAE Fall Conference, Vol.2, pp.1513~1518, 2003 |
Study on the comformation of crystalline structure in PVDF/PVA composite film Hong, Hyun Soo; Kim, Seong Su, International workshop on active materials and soft mechatronics (AMSM), KAIST, 2018-10-25 |
Study on the core-shell structured fiber type strain sensor with load bearing characteristics in composite structures On, Seung Yoon; Kim, Seong Su, 22nd International Conference on Composite Materials, ICCM 2019, International Committee on Composite Materials, 2019-08 |
Study on the core-shell structured fiber type strain sensor with load bearing chracteristics in composite structures On, Seungyoon; Kim, Seong Su, 22nd International Conference on Composite Materials, International Conference on Composite Materials, 2019-08-12 |
Study on the curing process for carbon/epoxy composites to reduce thermal residual stress Kim, Seong Su; Murayama, Hideaki; Kageyama, Kazuro; Uzawa, Kiyoshi; Kanai, Makoto, COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, v.43, no.8, pp.1197 - 1202, 2012-08 |
Study on the definition of equivalent plastic strain under non-associated flow rule for finite element formulation Safaei, Mohsen; Yoon, Jeong Whan; De Waele, Wim, INTERNATIONAL JOURNAL OF PLASTICITY, v.58, no.Special SI, pp.219 - 238, 2014-07 |
Study on the design and manufacturing of carbon fiber reinforced composite by tailored non-crimp fabric Jung, Min Hye; Kim, Seong Su, International Conference on Mechanics of Composites, ICCS, 2018-07-10 |
Study on the Design of CAE Modeler for a Weapon System Supporting a large volume CAE analysis Song, Ilhwan; Kim, Ikjune; Yu, Yonggyun; Li, Jinngao; Han, Soonhung, ACCDE 2010, pp.525 - 528, 2010-08-27 |
Study on the development of the Flexural Plate Wave (FPW) accelerometer for the continuous damping control system of an automobile Lee, Jin Seung; Lee, Seung-Seob; Lim, Jung-Taek; Lee, Seung-Cheol; Kim, Seong-Soo, 2007 World Congress, SAE International, 2007-04 |
Study on the Effect of a Magnetic Field on Electrolytic Finishing Process J.D.Kim; D.X.Jin; M.S.Choi, INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, v.37, no.4, pp.401 - 408, 1997 |
Study on the effect of channel layout of flat-plate micro pulsating heat pipes under a local heating conditionlink Lim, jonghyun; Kim, Sung Jin; et al, 2021 |
Study on the effect of CO2 partial pressure on mechanism of sulfation of calcium carbonate sorbent particle Jeong, Seongha; Lee, Kang Soo; Keel, Sang In; Yun, Jin Han; Kim, Sang Soo, European Aerosol Conference 2012, -, 2012-09-03 |
Study on the effect of current collector structures on the performance of MCFCs using three-dimensional fluid dynamics analysis Lee, Chang-Whan; Lee, Mihui; Yoon, Sung-Pil; Ham, Hyung-Chul; Choi, Sun Hee; Han, Jonghee; Nam, Suk Woo; et al, JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY, v.51, pp.153 - 161, 2017-07 |
Study on the Effect of Thermal Property of Metals in Ultrasonic-Assisted Laser Machining Lee, Hu Seung; Kim, Gun Woo; Park, Jong Eun; Yang, Min Yang; Cho, Sung Hak; Park, Jong Kweon, TRANSACTIONS OF THE KOREAN SOCIETY OF MECHANICAL ENGINEERS A, v.39, no.8, pp.759 - 763, 2015-08 |
Discover