Browse "School of Mechanical and Aerospace Engineering(기계항공공학부)" by Title
Showing results 741 to 760 of 47386
| A Comparison between Predicted and Measured Acoustic Charactiristics of Jeonmin Catholic Church Ih, Jeong-Guon; Jeong, CH; Kwon, YI; Shin, SH, Spring Meeting of the ASK, pp.241 - 244, 2004 |
| A comparison between the Total Lagrangian Scheme (TLS) and the Predominat Twin Reorientation (PTR) methods to analyze the twinning deformations in a rate dependent crystal plasticity model Kitayama, Kohshiroh; Cardoso, Rui P R; Yoon, Jeong Whan; Uemor, Takeshi; Yoshida, Fusahito, Computational Plasticity XI - Fundamentals and Applications, COMPLAS XI, pp.1491 - 1497, International Center for Numerical Methods in Engineering, 2011-09 |
| A comparison of biomechanical stability and pullout strength of two C1-C2 fixation constructs Savage, Jason W.; Limthongkul, Worawat; Park, Hyung-Soon; Zhang, Li-Qun; Karaikovic, Eldin E., SPINE JOURNAL, v.11, no.7, pp.654 - 658, 2011-07 |
| A Comparison of Commercial Software for the Sound Quality Analysis Shin, SH; Ih, Jeong-Guon, Autumn Meeting of ASK, pp.215 - 218, 2004-11 |
| A comparison of deformation and failure behaviors of AZ31 and E-form Mg alloys under V-bending test Choi, Shi-Hoon; Singh, Jaiveer; Kim, Min-Seong; Yoon, Jeong Whan, 10th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes (NUMISHEET), IOP Publishing, 2016-09 |
| A comparison of methods for predicting the fatigue life of gray cast iron at elevated temperatures Lee, Keum-Oh; Lee, Soon-Bok, FATIGUE FRACTURE OF ENGINEERING MATERIALS STRUCTURES, v.39, no.4, pp.439 - 452, 2016-04 |
| A Comparison of Nonlinear Filter Algorithms for Terrain-referenced Underwater Navigation Kim, Tae Yun; Kim, Jinwhan; Byun, Seung-Woo, INTERNATIONAL JOURNAL OF CONTROL AUTOMATION AND SYSTEMS, v.16, no.6, pp.2977 - 2989, 2018-12 |
| A comparison of spray characteristics between an air-assisted fuel injector and a high-pressure swirl injector for gasoline direct-injection engine application Jang, C; Choi, Sangmin, ATOMIZATION AND SPRAYS, v.12, no.1-3, pp.229 - 245, 2002 |
| A comparison of the influence of global functional loads vs. local contact anatomy on articular cartilage thickness at the knee Koo, Seungbum; Andriacchi, Thomas P., JOURNAL OF BIOMECHANICS, v.40, no.13, pp.2961 - 2966, 2007 |
| A comparison of the shrinking core model and the grain model for the iron ore pellet indurator simulation Ahn, Hyungjun; Choi, Sangmin, COMPUTERS CHEMICAL ENGINEERING, v.97, pp.13 - 26, 2017-02 |
| A Comparison of Vibration Isolation Characteristics of Various Forms of Passive Vibration Isolator 이대은; 한재흥, 한국소음진동공학회논문집, v.22, no.9, pp.817 - 824, 2012-09 |
| A comparison study of some artificial intelligence approaches to the generation of robotic assembly sequences Cho, Hyungsuck, Int. Conference on Engineering Design and Automation, 1998 |
| A Compartive Study on Thermal and Mechanical Fatigue Behavior of Lead-free Solder Joints Kim, Ilho; Lee, Soon-Bok, ECF16, pp.366 -, 2006 |
| A COMPLEMENTARITY-PROBLEM FORMULATION FOR TWO-DIMENSIONAL FRICTIONAL CONTACT PROBLEMS Kwak, Byung Man; LEE, SS, COMPUTERS STRUCTURES, v.28, no.4, pp.469 - 480, 1988-08 |
| A complete solution to asymmetric S-curve motion profile: Theory & experiments Ha C.-W.; Rew K.-H.; Kim, Kyung-Soo, 2008 International Conference on Control, Automation and Systems, ICCAS 2008, pp.2845 - 2849, 2008-10-14 |
| A COMPLEX MODAL TESTING THEORY FOR ROTATING MACHINERY Lee, Chong-Won, MECHANICAL SYSTEMS AND SIGNAL PROCESSING, v.5, no.2, pp.119 - 137, 1991-03 |
| A compliance control of telerobot systems using a recurrent neural network Cho, Hyungsuck, Japan-U.S.A. Symposium on Flexible Automation, 1992 |
| A Compliant Hybrid Zero Dynamics Controller for Stable, Efficient and Fast Bipedal Walking on MABEL Sreenath, Koushil; Park, Hae-Won; Poulakakis, Ioannis; Grizzle, J. W., INTERNATIONAL JOURNAL OF ROBOTICS RESEARCH, v.30, no.9, pp.1170 - 1193, 2011-08 |
| A Composite Air Spindle-Rotor System Lee, Dai Gil; Chang,SH, International Symposium on Stability Control of Rotating Machinery, 2001 |
| A composite cantilever arm for guiding a moving wire in an electrical discharge wire cutting machine Lee, CS; Oh, JH; Lee, Dai Gil; Choi, JH, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.113, no.1-3, pp.172 - 177, 2001-06 |
Discover
Open Access
Date issued
- 5,699 2020 - 2024
- 16,596 2010 - 2019
- 14,059 2000 - 2009
- 7,691 1990 - 1999
- 2,266 1980 - 1989